Guest Australian 1923 Posted February 23, 2008 Share Posted February 23, 2008 Can anyone help with a good demountable rim for my 1923 Australian Buick. The actual rim size is 24" x 3 1/2". I believe the part number is 150865. The one I have seems to have been a larger diameter and a chunk has been cut out then badly rewelded.Thanks Link to comment Share on other sites More sharing options...
Dandy Dave Posted February 23, 2008 Share Posted February 23, 2008 I have a bunch of rims but I am not sure what they are from. Any way you could post a photo so that the design and driving lug can be seen. Also, do you know who manufactured the rim. Baker? Firestone? Good Year? Dave! Link to comment Share on other sites More sharing options...
jbbuick22 Posted February 23, 2008 Share Posted February 23, 2008 Dave, 23&24 Buick used a #23 Jaxon rim. The #23 was used till 26, in different dia. John22-6-55 Sport Touring Link to comment Share on other sites More sharing options...
Leif Holmberg Posted February 24, 2008 Share Posted February 24, 2008 1923 years Buick. 109"(4cyl.models) wheelbase used 31x4=23",118" wheelbase used 32x4=24",124" wheelbase used 33x4,5=24 and all open sport models used 32x4,5=23". This from George H.Dammans book 70 years of Buick. Leif in Sweden. Link to comment Share on other sites More sharing options...
Dandy Dave Posted February 24, 2008 Share Posted February 24, 2008 So how do I tell that it is a Jackson Rim that I have or not? Markings? Stampings? part numbers? Dave! Link to comment Share on other sites More sharing options...
Mark Shaw Posted February 24, 2008 Share Posted February 24, 2008 I too am in need of a demountable rim for my 1924 Buick Master Six. Mine is 25.5" diameter. Photo of the latch is below for reference. Maybe they are the same type?Dave, if you have one in good shape, could you bring it to to the National Meet in Flint? Link to comment Share on other sites More sharing options...
jbbuick22 Posted February 25, 2008 Share Posted February 25, 2008 Dave, Buick used only Jaxon rims from at least 1918 to the 30's, the name Jaxon is usually stamped on the inside, but most of the time the rim is rusty so it would be hard the read the name. Mark, 1924-45 used a Jaxon #23 24" the same rim that the 23 uses. The pic you posted is of a Jaxon #23. I have a catalog from Oakcrest Machine shop. John B22-6-55 Sport Touring Link to comment Share on other sites More sharing options...
Dandy Dave Posted February 25, 2008 Share Posted February 25, 2008 Mark, What size tire is on the rim? 25 and a half sounds odd to me??? I'll look though the pile and see what is there and sure, I'll bring it to Flint if I have one. My 15 uses a 26" Baker. Dave! Link to comment Share on other sites More sharing options...
Mark Shaw Posted February 25, 2008 Share Posted February 25, 2008 Dave, My tires are 33 X 4 1/2. I previously posted the outside diameter at the lip with the tire mounted. Can you send me a photo of what you have?Thanks, Link to comment Share on other sites More sharing options...
Mark Shaw Posted February 25, 2008 Share Posted February 25, 2008 John, Thanks for the clarification. Evidently we are looking for the same rim. I corrected my post on the Buy/Sell list and will certainly share any leads with our friend down under. Link to comment Share on other sites More sharing options...
Brian_Heil Posted February 25, 2008 Share Posted February 25, 2008 I'm sitting here laughing. OK howling.The wheel rim Mark Shaw has shown is on loan from yours truly. Perhaps I should say the Heil Collection.Mark bought his 1924 Model 45 (that was converted to a truck) on his way to the Rochester, Minn National Meet sight unseen. Mark made it ready for the After Tour with numerous repairs while on the show field and successfully completed the After Tour.I purchased the nicest 24" used rim I have ever seen at the swap meet area. Excited, I rolled it across the show field to where I was parked next to Mr. Shaw to show him my find.Noting Mr. Shaw had a new spare tire/tube/flap but alas, no spare rim (he mounted 4 tires/tubes/flaps as part of his show field repairs removing tires that were installed when Coolidge was in office all while dozens watched). I could only do the Buick gentlemanly thing and lend him my new purchase. (My own spare rim is beat but good as many were in the day).I have since seen my spare in many photos, and now the subject of a forum chat . . . . some day I may even see it 'live'!If you all only knew how well I sleep knowing my good friend has a spare wheel should he ever need it while touring in the great Northwest! I also have the knowledge that my passengers for this years After Tour in Fenton (The Shaws) will do a splendid job should my 1923 require a tire change on the tour! Link to comment Share on other sites More sharing options...
Dandy Dave Posted February 26, 2008 Share Posted February 26, 2008 Hey Mark, He has an Australian car, but it resides in Merry Old England. I have to dig the rims out. Looks like it is going to snow here, may be a few days. I hope I have two and can help you both. Also, I have been hearing from Bud Rex lately. He has been talking to my good old longtime friend Louie Iaccino also about his clutch problem. Dandy Dave! Link to comment Share on other sites More sharing options...
Dandy Dave Posted February 26, 2008 Share Posted February 26, 2008 Nutin wrong with helpin out your buddies when they're down and out! May your rim ride many happy miles as it travels ever homeward bound on the long road around! Dave! Link to comment Share on other sites More sharing options...
jbbuick22 Posted February 26, 2008 Share Posted February 26, 2008 Try Dick Kwack from NY, I sold him 600 rims about 10 years ago, maybe he still has some of them. John B. Sherborn MA22-6-55 Sport Touring Link to comment Share on other sites More sharing options...
Dandy Dave Posted February 29, 2008 Share Posted February 29, 2008 Sorry fellers. I don't have anything 24 inch in the whole pile. I called a buddy of mine and asked if he had any but no luck there either. Seems to be a rare size. Dave! Link to comment Share on other sites More sharing options...
mrspeedyt Posted October 17, 2009 Share Posted October 17, 2009 just how do you get the tire off the rim??? :thanks! Link to comment Share on other sites More sharing options...
Guest Roger_Roy Posted October 17, 2009 Share Posted October 17, 2009 Can anyone help with a good demountable rim for my 1923 Australian Buick. Thankshow'd you go? Im off to look at a '23 tomorrow and will be dragging it home at a later date, if it has a usable rim Ill try and get a photoRoger Link to comment Share on other sites More sharing options...
mrspeedyt Posted October 18, 2009 Share Posted October 18, 2009 my neighbor and i got the tire off...his 1921"t" tires dismount just like a bicycle...mine don't...there is a special tool for the buick rim i guess...which i need perhaps to get the tire back on the rim...what does it look like?? can i buy one from my neighborhood buick dealer? thanks!!! Link to comment Share on other sites More sharing options...
Fred Rawling Posted October 18, 2009 Share Posted October 18, 2009 Here is my 2 cents worth.1923 model 45 takes a 32 x 4 rim and 1924 model 47 take a 32 x 4 1/2 rim per the 2005 BCA judging manuel and my 1935 Kelsey-Hayes wheel catalogue. It is possible to put a 32 x 4 1/2 tire on a 32 x 4 rim and visa versa.Double the smaller number and subtract it from the large number to get the rim size 32 x 4 is [32 - (4 + 4) = 24]. 32 x 4.5 is [32 - (4.5 + 4.5) = 23 inch] rimThe 24 inches or 23 inches is the outside diameter of the rim where the tire bead touches the flat outside part of the rim, not the overall diameter of the rim.The overall diameter of the rim is usually around 1 1/2 inches greater than the rim size. It can vary.The width of the rim when you measure across the rim at the widest part is usually around 3 1/2 inches on the small series cars and 4 1/2 inches on the larger series cars. This does not always apply. There can be exceptions.A quick way to get the rim size is measure the inside diameter of the rim, add 1/2 inch and round up the the next inch.. Link to comment Share on other sites More sharing options...
Fred Rawling Posted October 18, 2009 Share Posted October 18, 2009 Here is my 2 cents worth.1923 model 45 takes a 32 x 4 rim and 1924 model 47 take a 32 x 4 1/2 rim per the 2005 BCA judging manuel and my 1935 Kelsey-Hayes wheel catalogue.It is possible to put a 32 x 4 1/2 tire on a 32 x 4 rim and visa versa.Double the smaller number and subtract it from the large number to get the rim size 32 x 4 is [32 - (4 + 4) = 24]. 32 x 4.5 is [32 - (4.5 + 4.5) = 23 inch] rimThe 24 inches or 23 inches is the outside diameter of the rim where the tire bead touches the flat outside part of the rim, not the overall diameter of the rim.The overall diameter of the rim is usually around 1 1/2 inches greater than the rim size. It can vary.The width of the rim when you measure across the rim at the widest part is usually around 3 1/2 inches on the small series cars and 4 1/2 inches on the larger series cars. This does not always apply. There can be exceptions.A quick way to get the rim size is measure the inside diameter of the rim, add 1/2 inch and round up the the next inch. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now