Jump to content

jbbuick22

Members
  • Posts

    604
  • Joined

  • Last visited

Everything posted by jbbuick22

  1. The engine # should be right behind the exhaust pipe connection,22 stamped into the alum , 23 it is on a metal plate. John B
  2. The clutch on a 22 M/G should make a clicking noise when it motors. John B
  3. Jon Try etrailer.com they have several camera systems Good luck, John B
  4. Hi Chuck, I have the parts you need, quadrant, throttle lever,and spark lever. I am on vac now, if you can wait I can gather the parts together when I get home. John 22-6-55 Sport touring
  5. I think the original was felt John
  6. Hugh, I think only the 1923 cage valve engines used steel timing gears. As a set (3) they will fit in older engines, this could explain why some older engines have steel gears. John 1922-6-55 .
  7. Terry, #62987 will fit models 41---47 the 48---55 long wheelbase uses a larger brg #65427 Still looking for the mirror bracket. John 22-6-55
  8. The metal gears started in 1923, and they will fit the older engines. John
  9. Tim, I thought I had an extra, but I can't seem to find it. I have one on my spare engine, sorry. John
  10. Still looking. I have one more place to look. John
  11. Tim, I think I have an extra 1922 manifold. I'll check tonight when I get home. John 1922-6-55 Sport Touring
  12. Mark, They connect to the two center main caps and supply oil press to them. The front and rear mains are not press fed. John
  13. Mark, Here is a pic oil the oil pump and lines. This one is from a 23. John 1922-6-55 Sport touring
  14. The late 22 and all 23 6cyl have an oil feed to the center mains. My car 856901 has that change , it looks like it can be fitted to the older engines (pump and lines). John 22-6-55 Sport touring
  15. Before you order new pistons, have the bores checked for taper. I have found that #6 bore wears the most. Good luck, John 22-6-55 Sport touring
  16. The gas tank on the model 41 has the same part #158835 as the model 55 sport touring. See Lief's last post. The reason for the longer filler neck is that it has to go through the wood trunk platform. Send a PM John
  17. I can send you some pics and dimensions, it is the same shape as the one you have just longer. John 22-6-55 Sport touring
  18. I think the gas tank has been replaced. With a factory trunk the gas filler should be outside of the right frame rail .The trunk sits on a wood platform . It should be a 22 gal tank like the models 54 and 55 use, and the gauge should say 22 gal When I get home I can post a copy of the parts book page. John 22-6-55 Sport touring
  19. It looks like it is a model 41 I guess the body is a little shorter to make room for the trunk platform . Also the 23 6 cyl use an alum cam gear and the reverse shift pattern. It is a good looking car, you will enjoy driving it. John, 22-6-55 Sport touring
  20. Hi, It looks like a model 41, because of the trunk, but I think the 41 has a 124" wb I think a model 40 would have 118" The body tag should be above the right toe board should say 23-6-41? Where are you located? A pic of the back would help id There are many of us that would be willing to help. Welcome, John 1922-6-55 Sport touring
  21. It looks correct for my 22-55 If someone there can confirm it with fit a 21 to 23 6cyl steering shaft that would be great. John 1922-6-55 Sport touring
  22. A copy of Dave Chambers article in Antique Automobile , I think April 1971. John 22-6-55 Sport touring
×
×
  • Create New...