pre1939chrysler

I have 2 sets of 19 " tires that would make perfect shop tires. One set is in poor condition but I only want $5. each. I will only take those if someone requests them. The other set is new and unused but had been mounted at one time. They are perfect for the shop and might be safe for short trips. They have hairline cracks on the sides. Both sets have the inner tubes and I think liners on the better pair. 2 valve stems need to be replaced on the not so good set. I haven't decided how much I want for the better set. Will be at Hershey GDD 30,31,32 Call jay at 610-863-6955 or astheime@ptd.net I'm only taking the best set unless someone requests them soon. I an packing for Hershey and will soon run out of room . Am loading requested items now.

I have the correct Exhaust manifold for a Model 58. That is the one that attaches the attaches the exhaust pipe to the manifold. If yours is held together with a flange and 2 bolts I can't help you. astheime@ptd.net I couldn't quirte make out from your pictures. Jay Astheimer

I' going to be in the same space at Hershey GDD 30,31,32. I 'm cutting back on what I usually take and concentrate on orders. If you need a special part I 'll put it aside. Will have lots of smalls and never taken parts but will leave horns hub caps and vacuum tanks at home. Call 610-863-6955 to place an orser. I have a huge selection of motors but need advance. Also have a 58 and 75 body/4 door on frame I'll sell . Very good condition. Pictures but they stay home. Some Chrysler shop tires . 610-863-6955 Jay

thanks , Tim ,for putting this in for me. I was making strawberry jelly this mourning. I owe you some. I want a roadster in any condition that can be restored Nothing restored. Call jay at 610-863-6955 and or email above. i was making strawberry thi

You are at the point ,it is trash. You could possibly send it out and a rebuild or call me at 610-863-6955, I sell 24 to 30 Chrysler parts. I can send pictures from my phone any where but no longer will sell in Australia except to old customers. I should have model 62. Jay Astheimer

I think everyone is correct in narrowing down the problem. I know I'll get slack for this but I think the problem is behind the steering wheel . Look up speed limits in 1916 for cars. And how many good roads were there ? I can go 45 to 55 mph in my 29,but why? I'd rather enjoy the scenery then make time. I had a wobble in my front end and changed king pins and tires. A little drift could be a steering box,steering wheel or loose linkage. When I get that old I hope I can drift a little too.

I have used parts that would probably work . If you email me I'll look up where you can get ball and pin. Early GMC trucks. astheime@ptd.net

I have at least 2 M/28 Chrysler motors. Also an H . Call jay at 610-863-6955 or e mail at astheime@ptd.net I sent a trans to Australia this mourning. I also have a very reasonable shipper. Jay

Brad, I might be able to help. I have 1924 Chrysler s /model 58. Any way you can send me the numbers off the gears? Jay Astheimer astheime@ptd.net 610-864-6955

Sorry about the typo 60 not 69. Fat fingers. I only have the 60,62 and 4 cyl. this time.

I have a few 4 and 6 cylinder Red Heads I'll sell. Sorry no 72/75 Jay 610-863=6955

I just parted a model 75 and the wheels are in excellent condition.The drums probably need smoothing and are solid.I also have repo. hub caps that you can't tell from orrigional. They are chromed and ready to put on your car. Sorry,I also have extra drums and lock rings. Call Jay 610-863-6955 astheime@ptd.net

Magoo I have a couple but I'm in the US. Jay Astheimer. astheime@ptd.net

TJ I have one. Email me at astheime@ptd.net

I have a few . Call and I'll look for them. Jay 610-863-6955 or astheime@ptd.net

I will pick up if I know where you are 'I m ready with cash in hand. Jay 610-863-5955

If you are in the 570 phone code, I'll take it ,sight unseen . Jay Astheimer 610-863-6955 I'm near Wind Gap Pa.

Sams as the one above it, only a bit shorter.

Keiser is correct. The tool he is offering is what you want. WP was cheap and made tool to fir various models.

I have both models of parts for sale. Most parts do not interchange. If interested call Jay at 610-863-6955 or e-mail astheime@ptd.net. I have parts from 1924 to 1930.

where are you located? Jay

Call me 610-863-6955 or astheime@ptd.net. I have some but need more info. Jat

I have 2 sets of 20" inch tires that still have the nubs on them. They were mounted but never used. If you have priced tires lately you may want to think about these. The inner tubes and liners are included. Both sets are Black wall. I want only $50. each. I have: 5 475/500 Twenty inch Coker Also 4 Four Ply Cord Type 650/20" Coker Classic I will hold them for half down for Hershey or pick up. Will do shipping but all associated cost will be extra in advance to shipping. There is also a possibility I may decide to go to Chickasaw OK. in March and take them there.It all depends If I get Hungry for Ribs. Call Jay 610-863-6955 or astheime@ptd.net.

I have 2 sets of 20" tires that were mounted but never run on the road as they still have the nubs. Inner tube and liners are included. If you have priced tires lately you may want to think about these. I only want $50. each. I have 5 Coker 20" 475/500 Black wall. Also I have 4 Coker Classic 4 Ply. Poly cord. 650/20" Black wall I will hold them for Hershey if interested for 1/2 down. There is a possibility I might go to Chicksaw Ok. in March depending how hungry I get for Jake's Ribs and Roy's Brisket. If interested ,call me at 610-863-6955 Ask for Jay or astheime@ptd.net..

I have 2 sets of 20" tires that were mounted but never run on the road as they still have the nubs. Inner tube and liners are included. If you have priced tires lately you may want to think about these. I only want $50. each. I have 5 Coker 20" 475/500 Black wall. Also I have 4 Coker Classic 4 Ply. Poly cord. 650/20" Black wall I will hold them for Hershey if interested for 1/2 down. There is a possibility I might go to Chicksaw Ok. in March depending how hungry I get for Jake's Ribs and Roy's Brisket. If interested ,call me at 610-863-6955 Ask for Jay or astheime@ptd.net..