pre1939chrysler

Shoot, Why don't you give me a harder parts find. I have all or most. Jay 610-863-6955 One stop shopping.

So i'm a poor speller. It must be nice to be perfect. May all your problems intensify and the blue bird of happiness poo poo on all your cars.Must give you great satisfaction to put people down. Have a nice day.

Best call me now. Since you went on line I;'ve been getting calls. Thanks every one for the good word. Tomorrow I get Corporal tunnel and won't be lifting too much for awhile. "What me worry" Alfred E. Newman

I should have most of what you are looking for. Email me at astheime@ptd.net or call Jay at 610-863-6955 in the evening Eastern time. No side curtains . Lots of gauges H & M engines and some sheet metal. Jay

Same as Steve, Send me a picture and I probably have it Jay astheime@ptd.net

600 in the rear and trans. 30 wt in the engine. At least half way ir to the side or rear fill plug.

What weight oil are you using? 610-863-6955 Jay

Chris has passed away.

I know nothing about Max. untill 1923. J

I have one bake light ring I think is close to yours. It is from a 32 Chrysler. Email me and I will send you a picture. astheime@ptd.net Jay

For a model 75 only I have 5 wire wheels and everything you need to go from wooden artillery to wire. Hardest part to find is the break drums and lug bolts. Will ship any where. They are in very good cognition. Can get another wheel if needed. Will sell only as a set. In addition I have beautiful 6inch wire wheel hub caps. These are as close to perfect as you will get. The detail arround the Gothic "C" is there too. Chromed and ready to go. There isn't much I dont have for a model 75 or anyother Chrysler made before 1930. Jay 610-863-6955 or astheime@ptd.net

I also sell them in original steel for $40. plus postage. \\ I have many other parts for model 66. Jay at astheime@ptd.net

Glad to be able to meet the man behind the words. You aren't as mean as you sound but I think you over work your workers. They looked over tired after a week of Hershey. Had an excellant year. Sure would like to find the center lever to the model 72. Saw what one of the vendors is putting out in the rough. Shouls be ashamed of himself . The workmanship looked like what you would do in Junior High shop. Mo worst parts shine rings around his and I would charge half . See you next you next year unless you find a full lot to sell . "Under Henry Fords Conditions". J

Come to my stand at Hershey GDD 30,31,32 I'll have most of it there. astheime@ptd.net. Cell 610-463-3631 I'll be there from Tuesday till Friday noon. Jay Astheimer.

If you need a Dodge head or starter or generator I may be able to help. Will take to Hershey . Call 610-863-6955 astheime@ptd.net I have 2 sets of 19 " tires that would make perfect shop tires. One set is in poor condition but I only want $5. each. I will only take those if someone requests them. The other set is new and unused but had been mounted at one time. They are perfect for the shop and might be safe for short trips. They have hairline cracks on the sides. Both sets have the inner tubes and I think liners on the better pair. 2 valve stems need to be replaced on the not so good set. I haven't decided how much I want for the better set. Will be at Hershey GDD 30,31,32 Call jay at 610-863-6955 or astheime@ptd.net I'm only taking the best set unless someone requests them soon. I an packing for Hershey and will soon run out of room . Am loading requested items now.

I have 2 sets of 19 " tires that would make perfect shop tires. One set is in poor condition but I only want $5. each. I will only take those if someone requests them. The other set is new and unused but had been mounted at one time. They are perfect for the shop and might be safe for short trips. They have hairline cracks on the sides. Both sets have the inner tubes and I think liners on the better pair. 2 valve stems need to be replaced on the not so good set. I haven't decided how much I want for the better set. Will be at Hershey GDD 30,31,32 Call jay at 610-863-6955 or astheime@ptd.net I'm only taking the best set unless someone requests them soon. I an packing for Hershey and will soon run out of room . Am loading requested items now.

I have 2 sets of 19 " tires that would make perfect shop tires. One set is in poor condition but I only want $5. each. I will only take those if someone requests them. The other set is new and unused but had been mounted at one time. They are perfect for the shop and might be safe for short trips. They have hairline cracks on the sides. Both sets have the inner tubes and I think liners on the better pair. 2 valve stems need to be replaced on the not so good set. I haven't decided how much I want for the better set. Will be at Hershey GDD 30,31,32 Call jay at 610-863-6955 or astheime@ptd.net I'm only taking the best set unless someone requests them soon. I an packing for Hershey and will soon run out of room . Am loading requested items now.

King, You're covered. Only have limited CD8 psarts. Yes I ship.

I have 2 sets of 19 " tires that would make perfect shop tires. One set is in poor condition but I only want $5. each. I will only take those if someone requests them. The other set is new and unused but had been mounted at one time. They are perfect for the shop and might be safe for short trips. They have hairline cracks on the sides. Both sets have the inner tubes and I think liners on the better pair. 2 valve stems need to be replaced on the not so good set. I haven't decided how much I want for the better set. Will be at Hershey GDD 30,31,32 Call jay at 610-863-6955 or astheime@ptd.net I'm only taking the best set unless someone requests them soon. I an packing for Hershey and will soon run out of room . Am loading requested items now.

I have the correct Exhaust manifold for a Model 58. That is the one that attaches the attaches the exhaust pipe to the manifold. If yours is held together with a flange and 2 bolts I can't help you. astheime@ptd.net I couldn't quirte make out from your pictures. Jay Astheimer

I' going to be in the same space at Hershey GDD 30,31,32. I 'm cutting back on what I usually take and concentrate on orders. If you need a special part I 'll put it aside. Will have lots of smalls and never taken parts but will leave horns hub caps and vacuum tanks at home. Call 610-863-6955 to place an orser. I have a huge selection of motors but need advance. Also have a 58 and 75 body/4 door on frame I'll sell . Very good condition. Pictures but they stay home. Some Chrysler shop tires . 610-863-6955 Jay

thanks , Tim ,for putting this in for me. I was making strawberry jelly this mourning. I owe you some. I want a roadster in any condition that can be restored Nothing restored. Call jay at 610-863-6955 and or email above. i was making strawberry thi

You are at the point ,it is trash. You could possibly send it out and a rebuild or call me at 610-863-6955, I sell 24 to 30 Chrysler parts. I can send pictures from my phone any where but no longer will sell in Australia except to old customers. I should have model 62. Jay Astheimer

I think everyone is correct in narrowing down the problem. I know I'll get slack for this but I think the problem is behind the steering wheel . Look up speed limits in 1916 for cars. And how many good roads were there ? I can go 45 to 55 mph in my 29,but why? I'd rather enjoy the scenery then make time. I had a wobble in my front end and changed king pins and tires. A little drift could be a steering box,steering wheel or loose linkage. When I get that old I hope I can drift a little too.

I have used parts that would probably work . If you email me I'll look up where you can get ball and pin. Early GMC trucks. astheime@ptd.net