pre1939chrysler

Does the accelerator pedal look like a aluminum mushroom that screws through the floorboard to a tracker under?

Bad spelling. Send me the 0D dimensions and I will check. Jay

Send me few. the OD I have a few. Jay 610 863 6955

I should have used ones. Jay 610 863 6955

How about a 29 Chrysler model 75 Rumble Seat Coupe. Jay 610 863 6955

Latch , don't know about it, but the throwout out bearing, most likely. 610 863 6955 Jay

Make sure the radiator and head lights are out. Lifr the front at an angle and have bars ready if some thing hangs up. Have a helper but go slow .2×4s to protect the fire wall. I removed about 40 Chrysler motors by my self but help is better. Make sure you have overhead room . I always remove the steering wheel 1st and ince the Pittman arm and bolts( 4 ) are out , you need to twist the box at an angle ind is a bit difficult. Tape the therads that hold the pittman arm nut.. .

That's for aa 30 /31 modelsV & W. Models .looks like the x spring is missing. Jay 610 863 6955

I think I do if the studs are remomed from the drum.?? Will look. J

Old car is completely restored and ready to go. Lots of parts can go with her if we agree on the price.Jay 610 863 6955 astheime@ptd.net. the trailer which has about 100 miles is available, Pictures to serious customers. Title and all worksheets and trophies o with her, all first and best of show. Much less than a restoration.

What are those boxes> I have the real thing made by a pattern maker and each is perfect foundry. How close are you to Pa. , I'll buy everything you have buy the housing. And the seats, I have many.

If you don't contact me. I can't help you. I have many at different prices. astheime@ptd.net 610 863 6955

Maxwell & Chrysler dideribuChryslertor housings for sale. Only have a fey of each left but will have more made if you will wait. I can't believe how fast they have been selling. We have to make sure we get you the correct one. There are quite a few differences. Call, Jay 610 863 6955 astheime@ptd.net If you don't contact me directly. I don't know if you want something I'm not on thr forum often.

I have them.

The unbuilt master cylinders I sell are $200. each for pre-1930 and later$150.s Can anyone beat that?

I just saw some is trying to make a fortune on these covers. Well, guess what, I only have been asking $50 each plus postage and they are new and perfect! I have many other 65 parts available here in the US. And if they want this kind of money they are asking, I'll just get more parts made and charge a more reasonable price. Most of my parts are made from patterns. astheime@pt.net

Astheime@ptd.net Send email or 610 863 6955 Jay

Any one want to tell me what master cylinder goes to what model Chrysler, I'd be glad to discuss it, plus I ' ll get all my literature and manuals out and show proof to what you think. Some of you are sooooo correct! Others Poofffff!

Correct, but look again , to save money WPC made them so the center can be removed. It took Lug Bolts as does mine. Send me a email and I'll send better pictures and some measurments. Astheime@ptd.net

I have one for a model 75 - R in very good condition and will Magna Flux. Jay. Astheime@ptd.net 610 863 6955

Leigh, Really not sure, will mine come apart?? I'll check tomorrow. Send an email and I'll work on it. been busy. Check with me first then I can tell you where to go. No one has any idea what I can comen up with. J

I very may have that on my shelf. I'll look tomorrow. CONTACT ME next week and if I have I'll send you pictures. Astheime@ptd.net C300

Any heavy grease with liithium or graphite is good . 1928 is too early for me. Jay