d9ddy Posted March 22, 2006 Share Posted March 22, 2006 I am in the process of cataloging some old Mopars that have been sitting in an old junk yard for 30-40 years. There are Plymouths, Dodges, Kaisers, Packards, Chryslers and more. The first car I am working on is a 48 Chrysler Windsor. The front grille is complete with all three bumper guards present, as is the front grille. The rear bumper is all there as is all the rear lights and bezels and emblems. The interior is shot, but all the hardware is there (radio, dual heater, gauges, knobs, escutchons, handles, steering wheel w/ center piece and horn ring, cranks, engine, tranny, glass, outside trim and original mopar yellow fog lights. If anyone is interested in these parts please email me. I am trying to see if it is worth my time to strip the cars and sell the parts. These parts are not NOS and have some pitting and need some work. If no one is interested.....it will end up in the scrap yard <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" /> Link to comment Share on other sites More sharing options...
grog Posted March 22, 2006 Share Posted March 22, 2006 Do you have any 1949 Windsor parts? Link to comment Share on other sites More sharing options...
d9ddy Posted March 22, 2006 Author Share Posted March 22, 2006 At this time I'm really not sure whats out there. Now that you mentioned it, I really have to make sure the Chrysler is a 48. A lot of stuff is still interchangeable. I hate to see it waste away or be crushed. Link to comment Share on other sites More sharing options...
grog Posted March 23, 2006 Share Posted March 23, 2006 Here is a list of 1949 Chrysler Windsor parts if you have them.... driver side window glass (4door), bumper guards, rear chrome,hubcaps,bullet head lights, fog lights (working), fan, generator (GDZ4801), fire wall tag, if your have any of these items let me know and asking prices..thanks Mark Link to comment Share on other sites More sharing options...
d9ddy Posted March 23, 2006 Author Share Posted March 23, 2006 Mark, I will check on these items this weekend and get back to you with pics. I know there is an original set of mopar fog lights in the trunk with the brackets. They would need to be rechromed. Glenn Link to comment Share on other sites More sharing options...
dieseldust Posted March 29, 2006 Share Posted March 29, 2006 i have a 1950 chrysler club coupe i want a radio for it i wonder if the 48 is the same radio,and maybe take the fog lights let me know how much thanks Link to comment Share on other sites More sharing options...
scotfree63 Posted March 31, 2006 Share Posted March 31, 2006 I have a 1948 windsor and I need a radiator front dust shield, the cowl moldings and clips, floor screws, the fender screws that mount to body and screws that mount to the inside fenders,both rear door windows, and starter.Thanks scot! scotfree63@cox.net <img src="http://forums.aaca.org/images/graemlins/cool.gif" alt="" /> <img src="http://forums.aaca.org/images/graemlins/cool.gif" alt="" /> Link to comment Share on other sites More sharing options...
zanuck13 Posted April 20, 2006 Share Posted April 20, 2006 I just bought a 48 chrysler, not sure of what parts are missing, however I do know it needs some of the outside trim, front fender chrome trim looks like grille extensions that are missing. I will get the car sometime between this weekend and the 12th of May so will know then and will list all parts I am interested in and you can contact me to let me know if you have any. Thanks Link to comment Share on other sites More sharing options...
54thstate Posted April 25, 2006 Share Posted April 25, 2006 Hi there - sounds like you will be doing a real public service in saving some useful parts from the crusher. I live in Britain and finding parts for my 51 Windsor can be pretty difficult but now thanks to the internet not impossible.I need window glass for passenger front window and rear passenger door vent but not sure if this is the same as 48 model. Also need various bits of chrome trim as mine is all pitted.Good luck with your enterprise - remember on-line auctions are a lifeline to some of us! Link to comment Share on other sites More sharing options...
CTraveler Posted July 9, 2006 Share Posted July 9, 2006 Need oil filter for 48 Windsor Link to comment Share on other sites More sharing options...
CTraveler Posted July 12, 2006 Share Posted July 12, 2006 Need oil filter complete for 48 Windsor Link to comment Share on other sites More sharing options...
CTraveler Posted July 16, 2006 Share Posted July 16, 2006 Need working temp gauge Link to comment Share on other sites More sharing options...
zack Posted August 9, 2006 Share Posted August 9, 2006 I HAVE 49 WINDSOR PARTS,WHAT WERE YOU LOOKING FOR? Link to comment Share on other sites More sharing options...
bebop138 Posted August 9, 2006 Share Posted August 9, 2006 Any 52 Windsor stuff----good Chrome trim?? Link to comment Share on other sites More sharing options...
zack Posted August 10, 2006 Share Posted August 10, 2006 I have spome 52 stuff-what did you need? Link to comment Share on other sites More sharing options...
bebop138 Posted August 10, 2006 Share Posted August 10, 2006 I have a 2dr Windsor---could use any good exterior chrome trim pieces--headlight and tail light bezels-fender spears----any good pieces that aren`t full of pits---good sterring wheel?? Chrome does not need to be show quality---need it for a nice driver--stuff that would not need chroming----I could use the drivers side front headlight bezel for sure as long as it`s not cracked or broken---let me know what you have---------Thanks!! Link to comment Share on other sites More sharing options...
Guest billy dean anderson Posted March 14, 2012 Share Posted March 14, 2012 (edited) wanted 48 chrysler royal upper and lower hood latches, also, instrument panel glassbill 208-582-2699 Idaho Edited March 14, 2012 by billy dean anderson phone number (see edit history) Link to comment Share on other sites More sharing options...
Guest markrush Posted March 15, 2012 Share Posted March 15, 2012 '46 -'48 along with the early '49 were largely interchangeable but not necessarily between different models (Plymouth to Chrysler for instance). I am interested in either 1)a '46-'48 Chrysler cowl mount side mirror (I believe they were options) for both sides or 2) the cowl trim and clips for the same car. I believe these were interchangeable between Chrysler/ Dodge/ DeSoto only. Do not scrap, please. Offer it on craig's list for scap value first. mrushdoony@att.net Link to comment Share on other sites More sharing options...
ray smith Posted April 29, 2021 Share Posted April 29, 2021 i'm in need of the chrome around left front turn singal Link to comment Share on other sites More sharing options...
Chry54 Posted April 29, 2021 Share Posted April 29, 2021 zack, i need a trunk light socket for my 54 windsor. the one that turns the bulb on/off with the movement of the trunk lid. the 52 might be the same. the 53 is. capt den Link to comment Share on other sites More sharing options...
marty mopar Posted May 1, 2021 Share Posted May 1, 2021 Zack last posted in 2006 you should send him a message Link to comment Share on other sites More sharing options...
c49er Posted May 2, 2021 Share Posted May 2, 2021 (edited) On 4/29/2021 at 7:36 AM, Chry54 said: zack, i need a trunk light socket for my 54 windsor. the one that turns the bulb on/off with the movement of the trunk lid. the 52 might be the same. the 53 is. capt den You need to run the MoPar # online/ ebay, AMS, Roberts, Len Dawson ...on and on....every week and join the National Chrysler club. Then contact all owners of the same car...then you will have a chance of finding the mercury trunk lite. I probably have one but am not going to spend hours digging parts...sorry. Edited November 14, 2023 by c49er (see edit history) Link to comment Share on other sites More sharing options...
Chry54 Posted May 2, 2021 Share Posted May 2, 2021 c49, thanks for the tips. did not know there is a national chrysler club. i would look for the socket for you. my email is captdennis29@gmail .com just in case you run across it while looking in your stash for something else. capt den Link to comment Share on other sites More sharing options...
c49er Posted May 2, 2021 Share Posted May 2, 2021 I made a mistake not the chrysler club....the WPC Club.. Maybe you know of that. Link to comment Share on other sites More sharing options...
Tomas Noren Posted November 12, 2023 Share Posted November 12, 2023 Any parts for Chrysler 1948 in 2023 ? Link to comment Share on other sites More sharing options...
JACK M Posted November 12, 2023 Share Posted November 12, 2023 I am parting one, but its getting pretty well picked. Link to comment Share on other sites More sharing options...
marcapra Posted December 7, 2023 Share Posted December 7, 2023 Could you post some pics of what you have? The links above go nowhere. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now