Buzzov-en Posted October 28, 2021 Share Posted October 28, 2021 This is my dually closed cab 31 Ford. It's from the Orange groves of Anaheim. 5 Link to comment Share on other sites More sharing options...
r1lark Posted October 29, 2021 Share Posted October 29, 2021 Good looking truck! What are your plans for it? 1 Link to comment Share on other sites More sharing options...
Buzzov-en Posted October 29, 2021 Author Share Posted October 29, 2021 Thank you! I'm going to restore it back to "Orange field" condition. It drives great but it needs new tires and seats to make it comfortable for cruising around. I will need to restore the steering wheel as well. The desert sun hasn't been kind to it. I also want to find a higher gear rear end since it tops out at about 35. The bed and stakes are all complete but new wood will really make a difference. 1 Link to comment Share on other sites More sharing options...
zeke01 Posted October 30, 2021 Share Posted October 30, 2021 Before you expend a lot of energy looking for a rear end, take a good long look at what is under the hood of your truck. There is no gear set made that will make your truck go faster. Zeke Link to comment Share on other sites More sharing options...
JFranklin Posted October 31, 2021 Share Posted October 31, 2021 4 hours ago, zeke01 said: Before you expend a lot of energy looking for a rear end, take a good long look at what is under the hood of your truck. There is no gear set made that will make your truck go faster. Zeke I'm not sure that is correct as gearing is what is hindering top speed on the big trucks. Yes a poor running engine can be a factor, but only a factor Link to comment Share on other sites More sharing options...
zeke01 Posted October 31, 2021 Share Posted October 31, 2021 I was referring to the 40 horsepower engine, the same one used in Model A automobiles. No matter how well the engine runs, it is still 40 horsepower. Besides, what will a different gear set do to the pulling power? If you can't top even a modest hill without gearing down, what have you accomplished? Zeke Link to comment Share on other sites More sharing options...
JFranklin Posted October 31, 2021 Share Posted October 31, 2021 (edited) Yes you always give up power to gain speed through gearing. He needs to give his plans serious thought, and possibly opt for an overdrive. Edited October 31, 2021 by JFranklin (see edit history) 2 Link to comment Share on other sites More sharing options...
mike6024 Posted November 4, 2021 Share Posted November 4, 2021 Orange County Archives from 1894 to the 1940's Link to comment Share on other sites More sharing options...
mike6024 Posted November 4, 2021 Share Posted November 4, 2021 Consolidated Orange Growers truck loaded with orange crates in front of office, 1930 — Calisphere 2 Link to comment Share on other sites More sharing options...
Buzzov-en Posted November 4, 2021 Author Share Posted November 4, 2021 Those are great pictures! Thank you. Here is the body badge and a sticker that's still on the back of the bed frame. 1 Link to comment Share on other sites More sharing options...
stakeside Posted November 5, 2021 Share Posted November 5, 2021 On 10/30/2021 at 8:56 PM, JFranklin said: I'm not sure that is correct as gearing is what is hindering top speed on the big trucks. Yes a poor running engine can be a factor, but only a factor I’ve learned what the warranty tag on my 29 DB 3/4 TON truck indicates. These old truck were not intended to be used for fast travel. They were used as an utility of moving goods. When you have a 5.11 rear end ratio you can not expect cruising in traffic at 55 mph. Some folks have invested in the “Mitchell “ transmission assist to get better top speeds. You just have to enjoy the journey and ignore the impatient divers. 1 Link to comment Share on other sites More sharing options...
Steve_Mack_CT Posted November 7, 2021 Share Posted November 7, 2021 Correct. No different than brass car or nickel era touring. Understanding what was optimum performance for the era helps with your benchmark. It won't turn your truck into a hemi cuda but several touring engine options exist that might give you a little more performance and not move to the banger hot rod stage. (Banger hot rods are fine if that is thd goal, but my guess iz this AA just wants to move well in the orchard and the open road, not ideal for highway.) I will say the engine must be taxed on an AA at higher speeds, the 325-ish lb difference between our sedan & roadster makes for a noticeable performance difference. Cool trucks though!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now