NC-car-guy Posted November 15, 2019 Share Posted November 15, 2019 (edited) One engine from a 56 special complete minus carb and exhaust manifolds. Looks pretty clean, turns by hand but running condition unknown. Been stored inside for 15+ years. $250 Pending One block only from a 56 century. Car showed 45k miles on odometer. Block looks decent but due to the water that was in it, I'd say bore it. $100 One complete 55 century 322 (no carb or intake) turns by hand. SOLD 55 century rear axle SOLD (hub to hub) Two 55 dynaflows one roadmaster one from a century SOLD one scrapped one Roadmaster rear axles and center carrier (spider gears and block used elsewhere) SOLD 4bbl intake $100 55 322 air cleaner repainted in great shape SOLD Crank and flexplate from 55 322 $50 Starter shields $40 55 Roadmaster power steering box and column SOLD 55 Roadmaster frame SOLD 56 century front spindles $20 pair Can be shipped via fastenal. Package deals welcome! Edited March 24, 2021 by NC-car-guy Updated sold items reduced prices (see edit history) 3 Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 16, 2019 Author Share Posted November 16, 2019 (edited) Edited January 26, 2020 by NC-car-guy (see edit history) Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 23, 2019 Author Share Posted November 23, 2019 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 23, 2019 Author Share Posted November 23, 2019 (edited) Ps pump $40 Seat skirts $5 each Timing covers $20 ea Edited January 16, 2020 by NC-car-guy (see edit history) Link to comment Share on other sites More sharing options...
MrEarl Posted November 24, 2019 Share Posted November 24, 2019 On 11/15/2019 at 9:57 AM, NC-car-guy said: 55 century rear axle $75 (hub to hub) what are the gears and what condition? Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 24, 2019 Author Share Posted November 24, 2019 4 minutes ago, MrEarl said: what are the gears and what condition? Good questions. Let me look for a tag under the car. If it's the ratio you want then I can open it up and look inside. Link to comment Share on other sites More sharing options...
MrEarl Posted November 24, 2019 Share Posted November 24, 2019 Unless from a 3 speed most likely 3.4 to 1. If the gears are for sure good, you’re givin that thing away dude. Consider putting it on the PreWar forum, they make great swaps into 30-40’s. Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 24, 2019 Author Share Posted November 24, 2019 (edited) 15 minutes ago, MrEarl said: Unless from a 3 speed most likely 3.4 to 1. If the gears are for sure good, you’re givin that thing away dude. Consider putting it on the PreWar forum, they make great swaps into 30-40’s. Its a dynaflow car. Stuffs just rotting away in the yard, no point keeping it and the market is bottomed out. Prewar has its own buy/sell? Edited November 24, 2019 by NC-car-guy (see edit history) 1 Link to comment Share on other sites More sharing options...
old-tank Posted November 24, 2019 Share Posted November 24, 2019 What number is the WCFB? Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 26, 2019 Author Share Posted November 26, 2019 The 2082 carter is sold. The other carter may be soon too. Need to clear out and downsize..what do y'all need. Link to comment Share on other sites More sharing options...
Beemon Posted November 26, 2019 Share Posted November 26, 2019 (edited) I'd be interested in the 2347s but I didn't see a price? Been looking for a matched pair for a while. Is it complete? Edited November 26, 2019 by Beemon (see edit history) 2 Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 26, 2019 Author Share Posted November 26, 2019 5 hours ago, Beemon said: I'd be interested in the 2347s but I didn't see a price? Been looking for a matched pair for a while. Is it complete? As noted above, it's probably sold. If not I'll let you know. 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 26, 2019 Author Share Posted November 26, 2019 15 hours ago, Beemon said: I'd be interested in the 2347s but I didn't see a price? Been looking for a matched pair for a while. Is it complete? PM sent Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 27, 2019 Author Share Posted November 27, 2019 (edited) 5 fuel pump cores $10 each Throttle linkage and kickdown rod from 55 roady $15 8- standard bore 322 nailhead used 1955 pistons SOLD 1955 Buick power brake booster and master cylinder. Moves freely but should rebuild for safety SOLD New?rebuilt? Manual brake master cylinder with tag not frozen, very clean inside $45 All prices are obo plus shipping Edited January 26, 2020 by NC-car-guy (see edit history) Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 27, 2019 Author Share Posted November 27, 2019 (edited) Crack free 4-door hardtop b pillar interior trim. One matched set one oddball. $30 for all 3. Edited January 16, 2020 by NC-car-guy (see edit history) Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 27, 2019 Author Share Posted November 27, 2019 (edited) Deleted some sold stuff. Edited January 5, 2020 by NC-car-guy (see edit history) Link to comment Share on other sites More sharing options...
g-g-g0 Posted November 28, 2019 Share Posted November 28, 2019 Happy Thanksgiving! Any idea if the power steering pump/bracket is correct for 53? A double pulley available? Out of town for a few days so unable to check my books. Gary Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 28, 2019 Author Share Posted November 28, 2019 16 minutes ago, g-g-g0 said: Happy Thanksgiving! Any idea if the power steering pump/bracket is correct for 53? A double pulley available? Out of town for a few days so unable to check my books. Gary No pulley here. Not sure about the bracket but pretty sure the reservoir is different. @MrEarl or @old-tank might know better than I. Happy Thanksgiving 1 Link to comment Share on other sites More sharing options...
Beemon Posted November 29, 2019 Share Posted November 29, 2019 I have seen a 53 pulley and pump, they are indeed different. There's a 53 Roadmaster with complete engine from pan to carb (WCFB) at the classic junkyard, at least the last time I was there. I can look again this weekend if you're interested @g-g-g0 1 Link to comment Share on other sites More sharing options...
NC-car-guy Posted November 29, 2019 Author Share Posted November 29, 2019 (edited) Here's the 56 timing cover cleaned up. $20obo Also found a harmonic balancer... Id recommend sending to damper doctor to get the rubber replaced. $10 these are not reproduced. I have 3. Edited January 16, 2020 by NC-car-guy (see edit history) Link to comment Share on other sites More sharing options...
Patrick J Reeve Posted December 11, 2019 Share Posted December 11, 2019 Hi Matt- Could you load the 56 motor and trans on a pellet and on a UPS truck? How much for both? Thanks Patrick 315-663-1569 Link to comment Share on other sites More sharing options...
NC-car-guy Posted December 30, 2019 Author Share Posted December 30, 2019 TTT Link to comment Share on other sites More sharing options...
NC-car-guy Posted January 5, 2020 Author Share Posted January 5, 2020 Link to comment Share on other sites More sharing options...
MrEarl Posted January 6, 2020 Share Posted January 6, 2020 23 hours ago, NC-car-guy said: Anyone interested in the rear end, I sold the brake backing plates. The fluid looks okay no sign of transmission fluid or water contamination. All the gears and splines look good as well. put it in my pile Link to comment Share on other sites More sharing options...
NC-car-guy Posted January 10, 2020 Author Share Posted January 10, 2020 Not sure what the power antenna is out of but the manual one looks to be 54/55. See where the housing is chipped. $20 for both plus shipping. Link to comment Share on other sites More sharing options...
NC-car-guy Posted January 16, 2020 Author Share Posted January 16, 2020 All prices dropped. Need to downsize... Link to comment Share on other sites More sharing options...
NC-car-guy Posted January 26, 2020 Author Share Posted January 26, 2020 Edited the list again. Link to comment Share on other sites More sharing options...
NC-car-guy Posted February 28, 2020 Author Share Posted February 28, 2020 Edited. I guess the Carter 2347s is back available, have not been able to reach @Beemon Link to comment Share on other sites More sharing options...
NC-car-guy Posted April 24, 2020 Author Share Posted April 24, 2020 Bump Link to comment Share on other sites More sharing options...
NC-car-guy Posted May 28, 2020 Author Share Posted May 28, 2020 List is up to date. Link to comment Share on other sites More sharing options...
NC-car-guy Posted December 28, 2020 Author Share Posted December 28, 2020 (edited) I just sent in my form for a vendor space at 2021 nationals, Charlotte site only. I will bring a load of stuff and want to return with none. This means I'll sell it really cheap. Want to know if there's any interest in large items as it will change how I haul my wares. I have a dynaflow and rear axle from a 55 roadmaster, a 55 nailhead (322) block and a 56 block. If there's significant interest in these larger I'll bring them. The smalls are too much to list but range from carbs to trim and starters to radios. Edited December 28, 2020 by NC-car-guy (see edit history) 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now