Patrick J Reeve

Members
  • Content Count

    72
  • Joined

  • Last visited

Everything posted by Patrick J Reeve

  1. Hi Matt- Could you load the 56 motor and trans on a pellet and on a UPS truck? How much for both? Thanks Patrick 315-663-1569
  2. Some parts that we need for an 8-cylinder car, some may be interchangeable with a 6-cylinder car: - thermostat assembly - front lower seat cushion - front window crank - front window gear assembly - wiper motor - hand throttle gear linkage at bottom of steering column - rear fender chrome strips - high-ratio rear end assembly Any help would be appreciated, Thank You Patrick Reeve susankreeve@yahoo.com (315)663-1569
  3. We could use the sending unit of a 1928 Buick Master gas tank, also the lady goddess radiator cap. Any help would be appreciated. Thank You Patrick Reeve susankreeve@yahoo.com (315)-663-1569
  4. Wanted: Delco ignition/Light Switch The specific switch came out of a 1925 Nash, but other manufacturers have used this same design. I am also interested in some other parts. If anyone has a gas cap, or any information on what people have used for a front windshield seal. I am also a carburetor heat control knob/handle. Any thing parts or information you have will be a great help. Thank You Patrick Reeve susankreeve@yahoo.com (315)-663-1569
  5. Wanted: Delco Ignition/Light Switch The part I want is off on a 1925 Nash, but I know other manufacturers use the same switch. Any help would be appreciated. Patrick Reeve susankreeve@yahoo.com (315)-663-1569
  6. Syracuse New York, my number is (315)-663-1569
  7. Sorry for the poor representation, the hood latch is not an issue. We had the hood open for a service check and my son forgot to close it.
  8. 61,000 original miles loaded A.C. works great new tires, brakes and exhaust new headliner and updated filler panels very rare color combination very nice driver $4300
  9. 61,000 original miles loaded A.C. works great new tires, brakes and exhaust new headliner and updated filler panels very rare color combination very nice driver $4300
  10. This is Patrick Reeve. I am very interested in your engine. If you could please call me or if I could get your number I would appreciate it. Thank you and no problems with the phone number but Thanks for looking out for me. Patrick 315-663-1569 cell or 315-665-8812 shop
  11. Hi -Where is the car; more pictures; any offers; what price are you looking for? Thanks Patrick
  12. Randy- Like your thread. People might look at the HHfranklin web sight; a real steel for a 25 Franklin that a person paid for a start of restoration on a 1925 Franklin and has for sale at $7000. Motor alone cost more than that to get rebuilt. frame modification is completed, nickel plating started, body looks and ugly interior(my opinion) like its a prior restoration. Looks like some one restoration update on a nice driver to begin with. Body is sitting on chassis.Take a look.. I don't know how to get sight on here. Mike for Patrick
  13. Randy- Like your thread. People might look at the HHfranklin web sight; a real steel for a 25 Franklin that a person paid for a start of restoration on a 1925 Franklin and has for sale at $7000. Motor alone cost more than that to get rebuilt. frame modification is completed, nickel plating started, body looks and ugly interior(my opinion) like its a prior restoration. Looks like some one restoration update on a nice driver to begin with. Body is sitting on chassis.Take a look.. I don't know how to get sight on here. Mike for Patrick
  14. Hi Have two hunter wheel assembly spin ( manual) balance machines. Where are you located as we are in upstate NY Patrick 315-663-8861
  15. Hi- Your phone # doesn't work. Call me if you have a front frame cross member. Thanks 315-663-8861
  16. HI john=- i thought i had sent you my phone # but don't see the posts; so here goes again.I 315-663-8861 Patrick
  17. Good morning. I am definately interested in the carbs and air cleaner. If you could give me a call or get your phone number I would appreciate it. Thank you, Patrick 315-663-1569
  18. More pictures and location? Thanks Patrick
  19. I'd love to buy this from you please. Please give me a call or if I could I could call you. Thanks Patrick 315-663-1569
  20. Hi - Could you give me a call at 315-663-1569. THANKS Patrick
  21. Have you found or made seals? I would like copies of the drawings as I am restoring a 1918 twin six. I maybe able to make the seals if you have't. Thanks Patrick -315-663-8861
  22. Hi - We do all our work in house including computer balancing, crank grinding, line boring and Babbitt work; give me a call and I will give you an honest estimate for the work that you require. Thanks in advance for a chance to do your job. Patrick Reeve 315-655-8812
  23. We rebuild engines and would be interested in it. I am located just outside of syracuse in upstate ny. Thank you, Patrick 315-663-1569
  24. Thank you for all the info on the interchanges. I haven't come up with one yet but haven't given up hope. Patrick