Guest bofusmosby Posted February 27, 2013 Share Posted February 27, 2013 I've got the inners, but still need the outers (with their races). If you happen to have these laying around and would like to sell them, PM me your asking price, or post it here. Thank you for looking! Link to comment Share on other sites More sharing options...
Ozstatman Posted February 27, 2013 Share Posted February 27, 2013 Don't have any "laying around" but about 2 years ago I sourced a pair of these locally(Australia) for a guy in England. If all else fails I could probably do the same for you. Cost then for an outer with race was $66.00 plus shipping but that was only to an Aussie address, going to the US would be fairly costly. Link to comment Share on other sites More sharing options...
auburnseeker Posted February 27, 2013 Share Posted February 27, 2013 Did you check Rock Auto? I put the number in and came up with this More Information for SKF B01 Says they have 5 in stock. Link to comment Share on other sites More sharing options...
GARY F Posted February 27, 2013 Share Posted February 27, 2013 how about kanter Link to comment Share on other sites More sharing options...
Guest bofusmosby Posted February 27, 2013 Share Posted February 27, 2013 Ozstatman, thank you for the info, but I agree, they would be quite high coming from the other side of the pond. I should be able to find some locally (USA or Ebay) if given enough time.auburnseeker, thank you for the link. If you look at the bearing photos, you will see what appears to be the bearing cage made out of plastic, just like the Chinese ones that Napa is selling for $27.99 each. There is no way I would want to use any bearing that are made (even partly) out of plastic. Thank you for your efforts. I appreciate both of you with your feed-back, and assistance.Gary, I know that Kanter sells them for I believe either $0 or $45 for the outers. I may have to go that route. However, I also believe that theirs are also Chinese made. Link to comment Share on other sites More sharing options...
hddennis Posted February 27, 2013 Share Posted February 27, 2013 Ozstatman, thank you for the info, but I agree, they would be quite high coming from the other side of the pond. I should be able to find some locally (USA or Ebay) if given enough time.auburnseeker, thank you for the link. If you look at the bearing photos, you will see what appears to be the bearing cage made out of plastic, just like the Chinese ones that Napa is selling for $27.99 each. There is no way I would want to use any bearing that are made (even partly) out of plastic. Thank you for your efforts. I appreciate both of you with your feed-back, and assistance.Gary, I know that Kanter sells them for I believe either $0 or $45 for the outers. I may have to go that route. However, I also believe that theirs are also Chinese made.Have you tried George At Olcar Bearing Co.?910-693-3324Howard Dennis Link to comment Share on other sites More sharing options...
Guest bofusmosby Posted February 28, 2013 Share Posted February 28, 2013 Have you tried George At Olcar Bearing Co.?910-693-3324Howard DennisI'll be calling them tomorrow. Thank you! Link to comment Share on other sites More sharing options...
PONTIAC1953 Posted February 28, 2013 Share Posted February 28, 2013 please check my posts under general forum section. charles coker, 1953 pontiac tech advisor. Link to comment Share on other sites More sharing options...
AC Fuhrman Posted February 28, 2013 Share Posted February 28, 2013 Try your local Kaman Industrial or Motion Industries - these bearings proabably fit a number of vehicles but also industrial machinery. I'm sure one of thes places can help! Link to comment Share on other sites More sharing options...
WireWheel Posted February 28, 2013 Share Posted February 28, 2013 I sent you a PM. I have two of the bearings I will sell. Link to comment Share on other sites More sharing options...
Guest bofusmosby Posted February 28, 2013 Share Posted February 28, 2013 I sent you a PM. I have two of the bearings I will sell.Never got the PM, could you re-send it please? Link to comment Share on other sites More sharing options...
broker-len Posted February 28, 2013 Share Posted February 28, 2013 OlCar Bearing-----------910 693 3324-----George----great people---have everything Link to comment Share on other sites More sharing options...
WireWheel Posted February 28, 2013 Share Posted February 28, 2013 (edited) I have the bearing you are looking for. Send me your contact information. Edited February 28, 2013 by WireWheel Delete phone number (see edit history) Link to comment Share on other sites More sharing options...
Guest bofusmosby Posted March 1, 2013 Share Posted March 1, 2013 I sent you a PM as well as an email. I look forward to talking to you! Link to comment Share on other sites More sharing options...
Guest bofusmosby Posted March 1, 2013 Share Posted March 1, 2013 Thanks to our fellow member Wirewheel, I'll be getting the bearings I need! It was a pleasure speaking to him on the phone, and again, this site has members of the highest caliber! Thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now