Ronncece

RIP and my condolences to the family we all have lost a great man and information to our cars.

I like what you all say about Him and the service he gave to you. I would like to call or get his web site I seem not able to find it. thanks for the help Ron 64 riviera

I had no idea my car had this so I checked and found it and it didn’t work. So I took it apart and found that the coil was not getting power through the plug. So I got the cover off and found no connection. I found a got a thin grade wire drilled a small hole and got it to the supply connector and attached it. IT now works thank you for bringing this up. 64 riviera

64 riviera 714 OC California

Can anyone tell me what the numbers mean on this wheel and if it’s for a 64 riviera the open part for the center cap is 2”

Ron pessy 17100 Santa Lucia st fountain valley ca 92708

David can you email me at rpessy@socal.rr.com i need those wiper arms

How do you want paid I will take them

I don’t know what year the wheels are the owner who I bought the car from is not around. How can I tell you can see in the picture the type. You maybe right

No caps on wheels but thanks for the info

No

Help I have a 64 riviera that has me stumped. When I turn a corner left or right windows down I hear a clicking sound. Going straight all quit no noise. Even under hard acceleration nothing. Stock wheels any ideas. 6 years frame off thank ron

You could try to make your own it’s not going to be easy. Try rock auto on line have them shipped. The last thing you don’t need is oil leaking on the exhaust.

Very nice

So lower seat divider is In stalled back upper seat clips on and bolts on lower frame i just can’t seem to get lower seat to slide into the gap on seat back to let it slide back far enough to clip bottom into place. Tomorrow I will send some pictures

So your saying lower seat first side trim then seat back and speaker. I just can’t seem to get it in place with the back in place and side panels installed. I thought the upper seat back gets bolted in and the lower slides in and clips on lower part on floor clip. I have read the upper thread and jus have trouble. HELP

I wanted to ask about the vent line. What is the brass thing thanks

I had a problem like that and found that I ran a new ground to the circuit board on the instrument panel and fixed a lot of problems. this was on a 64 riviera

Just did this the upper is bolted to the core support and the lower just hangs there. There is two rubber spacers that bolts to lower part to just keep it fro flopping back and forth. this is the lower left.

What type of diode is used and how do I install it. Does anyone have a diagram Radio shack is no more maybe amazon but what number. HELP retired