knobless

Here's is a shot of mine taking it apart....flipped up to access area.

Does anyone know where to get the rear venting weather seal for these cars?? Thanks Steve

does it have the bottom on it , Radiator Ram? thanks

I am also looking for 1 34 dodge, cone shape tail lights, on the stalk stands,

Here is my originals steel artillery,with caps, but I will be using the wire wheels I have, but holding onto these.....

I may have a few pcs off a 36 dodge would they be the real thin ones,1/4" or so? Let me know, Steve

I may have one , please post a picture and a measure of length,

Here is a few more,,,,(2 door)

Have a tail light stand and need to find out which car it is off of any ideas? thanks

ok I will, just sold the linkage to the clutch pedal too, had them hanging around for some time, but I'll search around ....."stay busy"

Here is the pin that screws into engine block, I just sold it to another looking for clutch parts, this is what the auto clutch is attached to.

I have a picture of the pin that hold the auto-clutchin place ,on 33 and 34 dodge motors if that will help? these pins unscrew from engine and can be mounted to other engines, let me know and if you need the pin let me know that also I have one .....

where is the 33? that's not 33 in the picture...........

Has "Evelite" inscribed....anyone?

I believe she was about 21 in this photo,,,,

looks like this only a 2 door not convertible..no?

Aug. 11 th 1936, you were close.............

What year?

Anyone know what year, make and model???

how about adjusting a need clutch? 1934, any pictures and procedure,? thanks

when did the door lock change from the handle to being mounted in the door? my dodge has the lock in the door itself and not in the handle

correct Ian no trim ring, snaps in with internal spring steel clips, I have the inners, looking for lic. light lens, and tail lens, just wanted to make sure I had the correct bullet shaped housings, all the help is appreciated ....thanks again

here's another photo

yes, well I have the stalks, and I have the small bullet chrome housings with internals, need to see what lenses and trim ring that hold the lenses in place .I also have a plate holder that was made from 2 parts, I think, I see this one the housing sets into it?. Thanks Ian....

Thanks country