Jump to content

knobless

Members
  • Posts

    1,378
  • Joined

  • Last visited

Everything posted by knobless

  1. Here is a photo of my 33 ply 2 dr. the M/C has both the top breather tube with hat and the brass fitting on the bottom, I may also have the brass fitting ( have to search) send picture of the fitting also. Thanks Steve in NH
  2. this is the one I have been looking for, the one that is just a straight channel does not allow a water tight fit to body....if anyone is looking contact me, Thanks
  3. The "right weatherstripping" water tight...works great, http://forums.aaca.org/album.php?albumid=1572
  4. steel 3 piece set up 1 wraps the top and sides 1 wraps the bottom (fit corners) 1pc sponge for bottom on body glued in place....
  5. if you come across a 33 34 dodge coupe in your search let me know......Thanks...
  6. also waiting on a sample from another company, This seal is not correct for 34 Dodge rear window, but I have found one that has the weather tight lip.....if you are looking for it contact me....
  7. I bought a repro set on ebay not cheap, have an old set off my car but they do have a crack in them,,,,,I may sell.
  8. Having the same problem here,,,???? can not post pics??
  9. any pictures? like to see your vertical bracket as my 34 has the bumper mounted tail lights too... thanks
  10. He also sells on epay under an asumed name: Vintage Mopar Direct". at higher prices than on his sight,,,word to the wise........
  11. Hi IAN The welt uses a series of small tack holes to be held in place with small spiral type nails / tacks ( cowl ). I think it should ends where the last tack hole is ,as not to Affect the hood and radiator areas lining up when hood is compressed down by the hood T- hooks on the body, radiator area uses screws flat head with nuts these also hold radiator ears in place, {small nuts behind ). Also Ian I have located rear window weather stripping for 34 exact fit with lip to seal , looks great. if you and others are looking I will have them shortly enough to do rear windows aprox, 72 inches $75 plus shipping, Steve
  12. May have found one that will work, will keep you posted.....trying to get a sample.
  13. cant seem to get pictures on here tonite...email me signalsteve@comcast.net
  14. Here they are I have 2 for drivers side but first I need to know which suctions are originals. before I part with them
  15. I have 33 plymouth handles , that were on my 34 Dodge,I may be willing to part with, just drivers side, have 2 ( my 34 Dodge is a 4 dr.)
  16. need to know if anyone has a good picture of the rear window seal for 34 Dodge 4 dr. I bought 2 and nither one seem to seal the exterior of the car, isn't there suppose to be a lip to seal tight? thanks in advance. "always can use some help"
  17. www.Classic-Car-Ads.com or www.Classic-Classified-Ads.compl also waiting on a sample from another company,
  18. Hi Ian a bit of a favor, can you take a picture of the seal used on your rear window? ordered one and it seem to me that it will not be weather tight once installed, when you have time no rush"
  19. Jen I did find a set of rear vent windows , in FL. thanks for your help..and bytheby how is the remodeling going? good luck there, hope all is well..
  20. Working on it Ian, so far , not so good, If there is a large enough need I may see if I can line something up to do them, waiting on 1 return call....that may do them, looks like you would have to send the steel frame to have the rubber molded right to it,? as far as I can tell.... do you have a photo of yours? as the ones I have have limited rubber remaining......thanks Steve in NH
  21. How about the rear vent window weather seals? look to be molded to the steel channel anyone have these restored? or does someone do them? thanks
  22. I have the seat pan for a 33 plymouth coupe pan only,,,,
  23. rear vent windows with the cranks and knobs, both drivers side door handles and the ignition from dash to coil with key if you have it, if no key thats fine too. thanks steve in NH also shifter knob (white , I see noone else has asked for it yet so.....
  24. I need drivers side door handles both front and back and what do you want for the rear vent windows? also need the ignition, complete dash to coil unit....
×
×
  • Create New...