John Kelso

You might inquire with Whitmer Coach in New Holand,Pa they offer 2 blacks for there carriage trade. Pg 40 of there catalogue717-656 3411 Have seen on some early steamers that what appeared to be black was originally a very dark green Better to talk to a supplier of automotive body shop products than one like Napa where paint is a sideline. Talk to a good body shop in your area

On difficult tops where the glue was still holding we used a heart gun to loosen it then scrape off. I would always clean the top of old glue mostly using thinner. There is a special vinyl top glue that we used and sprayed it on. Some glues will become sticky when exposed to summer heat,( hot day direct sun on black material) have seen this often on covered trunks. S Start in the middle and move to the sides when reinstalling tricky part is when you come to the rear corners as you lay the top down do it slowly and with help working out air bubbles. Good luck

Great looking Lincoln, best of luck with sale!

Thank you for the suggestion

I have restored wood bodied cars in worse conditions, the iron work here is the important part.

If there were some way to get it to Pennsylvania I'd take it in a heartbeat.

You need a steam car!

Randy would you happen to have a buy it now on the 24 manual, would look good with my car. Thanks, John

Joe I have a 36 Front and rear axle assembly. Actually have 2 one set together one apart. PM me to discuss. John Kelso

I have also used the West System with great success. I also like the Smith's as well, It seems to penetrate into the wood better than West.

Hi Bill, Sorry I missed you at Hershey last year. The ones I'm looking for are 1 1/2 " I can always add tabs. Thanks for checking

Need a pair of 1910 or 1911 International auto buggy springs. Thanks

Need a pair of front springs for a 1910 or 1911 International Auto Buggy. Thanks

Need a set of front springs for a 1910 or 1911 International auto wagon. Thank you

Could you please send me some more information or pictures Thanks John

I sure like that car!

Yes they are available. Measuring across the top of the threads inside the cap is 2.420 and they are 16 tpi

Good job, and a memory your son won't forget. Had similar car related experiences with my kids and they still talk about them. Oh, and they age well too!

Quite similar to the one I had on my model 30 Cadillac1910

I can already feel the heat coming but here goes. I seem to recall that the trim from a VW Bug of the late 60's solved this problem for me. Takes a bit of tweeking . Good luck

Looking for a 6 tone(tubes) brass whistle for a steam car

6 tone (tubes)whistle wanted for steam car Adkinson type

Looking for a 6 tone Adkinson type whistle for a steam car. Thanks

Hi yes I do still have it.

Sorry about that the OD of the cap at the teeth is 5", the inner at the threads is approx 3 3/16 and the thread count is 12 Thanks for pointing that out