broker-len Posted October 25, 2018 Share Posted October 25, 2018 is there any one who has a 32 PA and is running the later AIR CLEANER SILENCER that comes up over the head please contact me at bobnroman@yahoo.com Link to comment Share on other sites More sharing options...
thehandleman Posted October 25, 2018 Share Posted October 25, 2018 never seen that one on the PA or PB see sales lit in pictures below Link to comment Share on other sites More sharing options...
broker-len Posted October 26, 2018 Author Share Posted October 26, 2018 (edited) See picture from owners manual PA second edition Dec 1931 my car is titled 32 so it may have come with the improved set up the problem I am having is when the cables and throttle arm are in place can not get the unit to fit Edited October 26, 2018 by broker-len (see edit history) Link to comment Share on other sites More sharing options...
thehandleman Posted October 26, 2018 Share Posted October 26, 2018 That’s wild! I have never seen that on any mopar of mine and my father’s and all we owned Since the early sixties that dad had of 1929-1932 plyms in his life and mine, the only styles I ever seen and have Installed was the one I posted,plus on the 1932 Chryslers as well. That is so cool that you came up with that style also. Good research. Regards Link to comment Share on other sites More sharing options...
broker-len Posted October 26, 2018 Author Share Posted October 26, 2018 it is cool-----------------but can not put it on I studied the picture of carb it seems it would go on with out the cables am hoping some one can clear this up Link to comment Share on other sites More sharing options...
32plywood Posted October 26, 2018 Share Posted October 26, 2018 thehandleman your pic's are of the 1932 PB air silencer set up --- it will work on the PA if you use the BB1 carb. The picture that Bob put up is of the late 31 PA --- the early PA did not use the long upper tube and the top part was just under the carb --problem was they filled with dirt and plugged up --- I think this was a dealer installed fix then used in later cars. Bob -- I know we have talked about this with no resolution --- I wonder if Bob Mcmulkin could help he is the Tech director for 31-32 for the Plymouth club or he was last I knew --- I do not have correct carb or cleaner on my car to help ---Allan Link to comment Share on other sites More sharing options...
keiser31 Posted October 26, 2018 Share Posted October 26, 2018 Just as an aside....did you see this? https://www.ebay.com/itm/1931-1932-1933-CHRYSLER-PLYMOUTH-DODGE-DESOTO-CARTER-BB1-BURGESS-INTAKE-SILENCER/223189807483?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 Link to comment Share on other sites More sharing options...
thehandleman Posted October 26, 2018 Share Posted October 26, 2018 I have it on my 1932 PB so I think mine is the more modern version and I have it connected to the correct Carter BB1 maybe they scrubbed the PA as it had problems like other gentleman was saying ?? And went to the Burgess like on my PB works good except when needing to shoot a little ether in carb after winter to start her up cheers Link to comment Share on other sites More sharing options...
broker-len Posted October 26, 2018 Author Share Posted October 26, 2018 I contacted Mcmulkin-------he told me he never saw one some one told me they went with the updated silencer because of fire due to motor backfire I did have a PB unit could not mount on my car if I remember it seems it hit the firewall at any rate I do have the early type of unit that I am running with a BB1 I also have a brass bowl but but I guess the search goes on as to why the unit will not fit maybe Lanny will run this post in the PLYMOUTH BULLETIN thank you all for your help Link to comment Share on other sites More sharing options...
thehandleman Posted October 26, 2018 Share Posted October 26, 2018 Bob, If you use the PB version with the Carter BB1 carb, I think oem was a 4A3 carb but you can use several variants I think 517S and others will work, The burgess has to slide on the carb quite far to avoid hitting firewall also there is a bracket that comes out on the bottom from engine to the burgess box which has a stud on the box that keeps it staionary and from it hitting firewall and side of hood, Good Luck in your ventures Rich Link to comment Share on other sites More sharing options...
broker-len Posted October 26, 2018 Author Share Posted October 26, 2018 (edited) As I said---------------------I had a PB air silencer I sold it it would not fit I have the one pictured I do have the early silencer as well but just trying to unlock the Question---------------why would chrysler put this picture in manual if it was not possible to install-------there is something I am missing-----------------------thank you for your help Edited October 26, 2018 by broker-len (see edit history) Link to comment Share on other sites More sharing options...
thehandleman Posted October 26, 2018 Share Posted October 26, 2018 Good Luck! Link to comment Share on other sites More sharing options...
broker-len Posted October 26, 2018 Author Share Posted October 26, 2018 did you sell the PA gas tank you had ? Link to comment Share on other sites More sharing options...
thehandleman Posted October 26, 2018 Share Posted October 26, 2018 no still have it, I put it back on shelf for next year ? Link to comment Share on other sites More sharing options...
Spinneyhill Posted October 27, 2018 Share Posted October 27, 2018 (edited) It looks to me like the long tube has slots where it fits onto the silencer, for a clamp. As such, it should rotate so you can fit the short tube on the carb. Is your accelerator rod around the right way? If it came through that hole on the carb from the other side, the long tube could be closer to the engine. The choke cable might even come around the other side of it. The rub here is that the manual picture is missing the accelerator rod and the choke cable! It also looks to me as if your accelerator linkage on the carb. is back too far. The tag the rod goes into should be more or less vertical according to the manual picture. The little rod (brass on yours?) on the other side of the accelerator appears to be vertical, whereas in the manual photo it at about 30o from the vertical. Edited October 27, 2018 by Spinneyhill (see edit history) Link to comment Share on other sites More sharing options...
broker-len Posted October 27, 2018 Author Share Posted October 27, 2018 (edited) Spinneyhill----------------you may have something found a picture of another PA motor and the accelerator rod is reversed I will try it but it seems the cable will still be a problem----------------------- thank you Edited October 27, 2018 by broker-len (see edit history) Link to comment Share on other sites More sharing options...
ArticiferTom Posted October 27, 2018 Share Posted October 27, 2018 (edited) Where the long exit tube with the elbow meets the box is the joint that pivots , to bring it away from rod , cables and motor . So box itself is sloped toward you when finished . Then extension stud off manifold bolt to pick up tube brace . How does that sound ? Edited October 27, 2018 by ArticiferTom grammer (see edit history) Link to comment Share on other sites More sharing options...
broker-len Posted October 27, 2018 Author Share Posted October 27, 2018 (edited) Tom --none of the joints are able to pivot they are set there are two mounting points to the left at the bottom of can mounts to bell housing and one on the vertical tube mounts to a manifold stud there is no ability to change the position once it is bolted on I think spinny hill has the idea going to reverse the throttle arm I have seen a few pictures of this motor and this arm is straight don't know why mine is bent except maybe that was procedure to mount this unit I'm starting to feel it is pretty rare no one has seen it---- bu not sure if I will clear the cable but will give it a go right now have the bb1 in place the next project is to paint the wheels Edited October 27, 2018 by broker-len (see edit history) Link to comment Share on other sites More sharing options...
Spinneyhill Posted October 27, 2018 Share Posted October 27, 2018 1 hour ago, broker-len said: --none of the joints are able to pivot they are set I don't agree. There are slots at the bottom in your picture. This means the tube is made to expand to allow rotation and removal. There are similar slots on the carb mounting end, which should also have a clamp. Link to comment Share on other sites More sharing options...
ArticiferTom Posted October 27, 2018 Share Posted October 27, 2018 That's what I thought too . But if it bolt mounts in two locations their goes that theory . On BOI diagram it looks to have slope to it . Well; maybe just take cable and throttle rod off mount and then see how they can be reconfigured . Link to comment Share on other sites More sharing options...
thehandleman Posted October 27, 2018 Share Posted October 27, 2018 My burgess silencer has a clamp for carb mount and a grooved slot for the breather end and my lower bracket bolt stud is smaller then bracket hole to allow for slide on and off, but my burgess silencer is for the PB not the PA so it could be diff as my car came and was sold with the BB1 as standard equip as the PA I think came with the brass bowl carter but Bob would know that better as std.equip ???? Thinking that. Link to comment Share on other sites More sharing options...
broker-len Posted October 27, 2018 Author Share Posted October 27, 2018 Spinny Hill I do understand your reasoning and I will check if that joint is movable but all the joints are braised and don't want to butcher it up the silencer can not be moved also as I said because it bolts to the bell housing left bottom which prevents it from being swung out if that is your idea Link to comment Share on other sites More sharing options...
Guest Posted October 27, 2018 Share Posted October 27, 2018 2 hours ago, broker-len said: all the joints are braised I'm glad your joints are cooked. ? Link to comment Share on other sites More sharing options...
32plywood Posted October 28, 2018 Share Posted October 28, 2018 Bob have you had the long pipe off of the silencer box?? when the unit is installed on the bellhousing pin and on the carb. it sets at an angle not strait up and down ---then if you put the pipe back on vertical to the motor it should open room for the carb linkage and cable. the silencer mounts on a slide pin and not bolted tight --IE. slips over the pin and on carburetor --- clamped installed on carb. --- the long tube slips onto the silencer box and bolts to the manifold bolt. it is also clamped on the silencer. I have seen one and the long tube is removable or it should be.---I had the silencer box and took measurements to build the tube. IT was removable and just clamped on ..my 2 cents worth--Allan Link to comment Share on other sites More sharing options...
broker-len Posted October 28, 2018 Author Share Posted October 28, 2018 (edited) Plywood------thank you,,,,,,,,,,,,the silencer is held by a BOLT on the bell housing and over the manifold stud all the pipes are fixed there is no wiggle room and if you look at the picture I posted it would not make any difference ,,,,,,,,,,,,,,,,,,,,as the picture indicates this unit is made by burges not sure if it was the one that came on the car going to try spinny hill's suggestion it is interesting that no one has come forward and said they have one of these,,,,,,,, maybe non survived Edited October 28, 2018 by broker-len (see edit history) Link to comment Share on other sites More sharing options...
Spinneyhill Posted October 28, 2018 Share Posted October 28, 2018 Seems to me that if that bottom joint is brazed on, it should be un-brazed so the silencer can be fitted as described above. Are you sure it is brazed and not just rusted? Link to comment Share on other sites More sharing options...
broker-len Posted October 28, 2018 Author Share Posted October 28, 2018 I have had this unit for 10 years I appears to have been never used rust free again even if I was to loosen the joint as you mention the CAN is fastened to the bell housing so even if I took the vertical piece off I could not swing it out and even if I could it may come closer to hitting the inside of the hood-----------as I look at pictures of other PA motors mine is the only one that is bent outward and in the other pictures the arm is going through the throttle from the inside your suggestion I think is the answer my car is a PA but the registration is for a 1932 so the car was second generation PA which tells me it had the updated silencer from the factory may be that is how they got it to fit bend the throttle arm in to clear the vertical pipe we are starting winter here and I don't work on cars in the cold and the next project is to paint the 6 wheels in the spring at this time have a bb1 with first generation silencer on the car Link to comment Share on other sites More sharing options...
31plymouth Posted October 11, 2020 Share Posted October 11, 2020 This is from a 1984 issue of the Plymouth Bulletin. Does the vertical section look a little tilted toward the hood side or is it my imagination?... Would the slight tilt give enough room for throttle rod? Link to comment Share on other sites More sharing options...
broker-len Posted October 11, 2020 Author Share Posted October 11, 2020 I may have that issue please do you have the exact date ?? Link to comment Share on other sites More sharing options...
31plymouth Posted October 11, 2020 Share Posted October 11, 2020 Lots of PA info in this issue Charlie Link to comment Share on other sites More sharing options...
broker-len Posted October 11, 2020 Author Share Posted October 11, 2020 (edited) I am having a problem understanding how the throttle arm and chock work around the silencer when installed and it is hard to see in picture Edited October 11, 2020 by broker-len (see edit history) Link to comment Share on other sites More sharing options...
31plymouth Posted October 11, 2020 Share Posted October 11, 2020 True, the picture isn't very clear , but I thought if the vertical pipe was tilted toward the hood that the throttle rod would have enough clearance on the engine side. Link to comment Share on other sites More sharing options...
broker-len Posted October 11, 2020 Author Share Posted October 11, 2020 the joints are not moveable on mine also the vertical pipe has a connection which bolts onto the manifold stud----I thingkthe idea of turning the throttle arm has merit I think I tried but could not and don't want to bend it maybe there was a second one used by chrysler am replacing the oil seals on rear and trans so car is in the shop I may play with it again Link to comment Share on other sites More sharing options...
thehandleman Posted October 12, 2020 Share Posted October 12, 2020 I have the PB version and it sits on a bracket it can only go one way it does not rotate Link to comment Share on other sites More sharing options...
Taphouse701 Posted November 3, 2022 Share Posted November 3, 2022 (edited) Good afternoon! Would anyone have any info on the 1931 plymouth convertible coupe ? This was my grandfather's car and I'm trying to track it down to see if I can buy it. Thanks Edited November 3, 2022 by Taphouse701 (see edit history) Link to comment Share on other sites More sharing options...
keiser31 Posted November 3, 2022 Share Posted November 3, 2022 (edited) 11 minutes ago, Taphouse701 said: Good afternoon! Would anyone have any info on the 1931 plymouth convertible coupe ? This was my grandfather's car and I'm trying to track it down to see if I can buy it. Thanks You might start a post of your own about the car as the request could get lost on this thread. I see it has cowl lamps which are kinda rare for that car. Edited November 3, 2022 by keiser31 (see edit history) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now