ChuckR Posted October 18, 2018 Share Posted October 18, 2018 I'm looking for a machinist or shop in the Southern California area that can broach new keyways into the brake drums of an 1906 Franklin. The keyways are long, 4.25". Will also need to machine new (or recut the old ) keyseats for the Woodruff keys in the axles which is 1.125" diameter. Will likely have to mill new Woodruff keys also. The axles use two Woodruffs in a row to mate with the brake drums. The axles are not tapered. Any help is appreciated. Link to comment Share on other sites More sharing options...
mikewest Posted October 19, 2018 Share Posted October 19, 2018 Chuck , Give Egge machine a call in Santa Fe Springs a call. They may do it or certainly can recommend someone. Link to comment Share on other sites More sharing options...
ChuckR Posted October 19, 2018 Author Share Posted October 19, 2018 Good idea, thx. Link to comment Share on other sites More sharing options...
John_Mereness Posted October 21, 2018 Share Posted October 21, 2018 Perhaps call Tom Rassmusen and Odyssey Restorations in Minnesota - my guess is the wheel has already been invented. Also, I use Zakira's Garage on Cincinnati for automotive machine tool projects - they are very good at what they do (they restore Miller race cars). . Link to comment Share on other sites More sharing options...
ChuckR Posted October 21, 2018 Author Share Posted October 21, 2018 Thanks, John. Tom is redoing the engine on this car as we speak. I was hoping to find someone local. Considering how much aerospace engineering was done here i SoCal, I'm surprised that there aren't dozens of competent machinists around. Age is apparently reducing the numbers. Link to comment Share on other sites More sharing options...
PFitz Posted October 21, 2018 Share Posted October 21, 2018 (edited) Finding a good machinist is not so much the problem - finding a machinist that has a broaching machine to do inner keyways is usually the problem. A bunch of listings come up if you do a Google search using, "So Cal machine shops + broaching service". Paul Edited October 21, 2018 by PFitz (see edit history) 1 Link to comment Share on other sites More sharing options...
Ozstatman Posted October 22, 2018 Share Posted October 22, 2018 Try this guy. Link to comment Share on other sites More sharing options...
hook Posted October 22, 2018 Share Posted October 22, 2018 Any machine shop that can't broach an inside keyway for an inch and an eight dia. isn't a machine shop, I can do that and I'm not a commercial machine shop. The problem is the length of 4.25 inches long. Standard inside keyway broach bushings are 2-3 inches long for that dia. You will need to find a shop that's willing to make a long broach bushing and the corresponding shims for that length plus an extension piece to push the broach through. This won't be an easy task to find for what you would be willing to pay to get that keyway. You may be better off finding another brake drum or look into a restoration shop with machining capabilities. In either case it won't be inexpensive. I agree with Paul about looking for a shop that specializes in broaching, not just a normal machine shop. 1 Link to comment Share on other sites More sharing options...
hook Posted October 22, 2018 Share Posted October 22, 2018 Cutting the woodruff key slots in the axels is a job any machine shop can do. Link to comment Share on other sites More sharing options...
ChuckR Posted October 22, 2018 Author Share Posted October 22, 2018 Thanks for the suggestions. I now have list and plan of attack. Link to comment Share on other sites More sharing options...
odat Posted October 24, 2018 Share Posted October 24, 2018 I wish you where on the east coast. A very simple job for any machinist that still can work manual machines. The big problem is that the new guys all want to program there computer to do the work!!! Its hard to find machines with handles on them anymore. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now