pre1939chrysler Posted October 31, 2023 Share Posted October 31, 2023 Lasalle is looking for a steering wheel so here are a few to consider. astheime@ptd.net 1 Link to comment Share on other sites More sharing options...
28 Chrysler Posted November 1, 2023 Share Posted November 1, 2023 Jay Can you post some more photos of these and give a ball park price? 1 Link to comment Share on other sites More sharing options...
Walt G Posted November 1, 2023 Share Posted November 1, 2023 Also at least the outside diameter of each wheel , photo shown makes it hard to determine condition. 3 Link to comment Share on other sites More sharing options...
Jack Bennett Posted November 3, 2023 Share Posted November 3, 2023 (edited) Hi Jay. Just a note that I have the new tires for my 1929 Fargo Express Panel, and have found that it has a Dodge DA-6 engine. I should be able to move the truck to its new home later this week, and will let you know about my engine, transmission and drive shaft needs. In the meantime, I see that you have some antique Chrysler steering wheels, and I need to replace the broken….now missing….one on the Fargo The steering wheel has a horn button and the levers for the spark advance and headlights, and they mount to a shaft which runs down the steering column, through the gear box, and work the headlight switch and spark advance rod. The center hole of the steering wheel has a 1” OD, and is secured with a slotted key. I’ll send some photos if they will help. Edited November 3, 2023 by Jack Bennett (see edit history) Link to comment Share on other sites More sharing options...
pre1939chrysler Posted November 22, 2023 Author Share Posted November 22, 2023 Actually, I just picked up a beautiful steering wheel,with all the levers, horn button and tubes. It is off a 1927-8 model 70. ALL $500. I think the wheel is 18 inches. I ALSO PICKED UP A great gas tank Ns a pair of round shocks with brackets. Starter too. Astheime@ptd.net Leaving for hunting camp soon. Link to comment Share on other sites More sharing options...
30DodgePanel Posted November 25, 2023 Share Posted November 25, 2023 On 11/21/2023 at 5:15 PM, pre1939chrysler said: Actually, I just picked up a beautiful steering wheel,with all the levers, horn button and tubes. It is off a 1927-8 model 70. ALL $500. I think the wheel is 18 inches. I ALSO PICKED UP A great gas tank Ns a pair of round shocks with brackets. Starter too. Astheime@ptd.net Leaving for hunting camp soon. Need a 17" OD that looks like this on both ends and/or just the horn button with good levers if you have it. Link to comment Share on other sites More sharing options...
AlfaTazio Posted November 29, 2023 Share Posted November 29, 2023 Would you happen to have a correct wheel for 1925 B 70 roadster, which I believe has metal spokes with a octagonal shaped wood rim, sure would help. Thanks Link to comment Share on other sites More sharing options...
pre1939chrysler Posted December 11, 2023 Author Share Posted December 11, 2023 I have exactly the one you are looking for in fantastic condition. I will post pictures or contact astheime@ptd.net and I will send. Jay Link to comment Share on other sites More sharing options...
pre1939chrysler Posted December 11, 2023 Author Share Posted December 11, 2023 yes , otherwise I need measurements of your steering tube and what you have at your column Link to comment Share on other sites More sharing options...
AlfaTazio Posted December 25, 2023 Share Posted December 25, 2023 Thanks for the photos, but I have that one already, and I feel it's incorrect. My car is a 1925 B 70 roadster, so it should have a metal spoke wood rim wheel. Please check on Hyman's site under sold inventory and the 1924 chrysler roadster will show the correct wheel, that I am looking for. Thanks for helping out. Link to comment Share on other sites More sharing options...
pre1939chrysler Posted December 28, 2023 Author Share Posted December 28, 2023 Link to comment Share on other sites More sharing options...
pre1939chrysler Posted December 30, 2023 Author Share Posted December 30, 2023 The # 1 bottom left is a 24 model B Link to comment Share on other sites More sharing options...
pre1939chrysler Posted January 3 Author Share Posted January 3 On 11/1/2023 at 12:27 PM, 28 Chrysler said: Jay Can you post some more photos of these and give a ball park price? 18" diameter $200. plus postage, contact me for measurements and available parts. 610 863 6955 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now