Brtele Posted June 27, 2023 Share Posted June 27, 2023 I’ve got the riviera in the shop to go over the transmission leaks and change the filter. I called Napa- no luck. Is there a filter/gasket/seal set I should look for? Thanks in advance Link to comment Share on other sites More sharing options...
psychostang Posted June 28, 2023 Share Posted June 28, 2023 Autozone has a filter/pan gasket kit "TF601" They also have a group of front/shifter/rear seals available. 1 Link to comment Share on other sites More sharing options...
Brtele Posted June 28, 2023 Author Share Posted June 28, 2023 I did see that online but was surprised and a little cautious that only autozone carried it. Maybe I’m just being paranoid. Link to comment Share on other sites More sharing options...
Brtele Posted June 28, 2023 Author Share Posted June 28, 2023 For some reason my search function on this forum works so much better from a PC than my mobile device (phone). Regardless, I went through Fatsco to source the filter and pan gasket. I also needed to replace the transmission mount - that has turned into a wild goose chase that ended with me purchasing an Anchor 2374 (1973 Buick ST400 mount) and I'll drill a hole in the cross member to modify the mount fastener location. Link to comment Share on other sites More sharing options...
RivNut Posted June 28, 2023 Share Posted June 28, 2023 2 hours ago, Brtele said: I also needed to replace the transmission mount - that has turned into a wild goose chase that ended with me purchasing an Anchor 2374 (1973 Buick ST400 mount) and I'll drill a hole in the cross member to modify the mount fastener location. Been there done that. Works fine. 1 Link to comment Share on other sites More sharing options...
EmTee Posted June 29, 2023 Share Posted June 29, 2023 Rock Auto had the gasket & filter for my '67. https://www.rockauto.com/ 1 Link to comment Share on other sites More sharing options...
Brtele Posted December 21, 2023 Author Share Posted December 21, 2023 The Anchor transmission mount worked great by drilling a hole in the center. I also replaced the filter/pan gasket (Fatsco) and other seals/gaskets (rear output seal, extension housing gasket). Right now everything seems to be dry but I'll keep an eye out for some wet cardboard! 2 Link to comment Share on other sites More sharing options...
XframeFX Posted December 22, 2023 Share Posted December 22, 2023 19 hours ago, Brtele said: The Anchor transmission mount worked great by drilling a hole in the center. I never heard of this Brand "Anchor" before now. I've decided to change my 30 year old engine mounts once again and Anchor still has them for 1st Gen Rivieras. https://www.rockauto.com/genImages/28/Anchor-Why-Mounts-Fail.pdf https://www.rockauto.com/genImages/BadMounts.pdf Link to comment Share on other sites More sharing options...
jframe Posted December 22, 2023 Share Posted December 22, 2023 I was selling Anchor brand mounts back in the late Eighties, when I was just a young parts pup. 1 Link to comment Share on other sites More sharing options...
gungeey Posted December 22, 2023 Share Posted December 22, 2023 1 hour ago, XframeFX said: I never heard of this Brand "Anchor" before now. I've decided to change my 30 year old engine mounts once again and Anchor still has them for 1st Gen Rivieras. https://www.rockauto.com/genImages/28/Anchor-Why-Mounts-Fail.pdf https://www.rockauto.com/genImages/BadMounts.pdf Perfect replacement for original Made in USA too. 1 Link to comment Share on other sites More sharing options...
RivNut Posted December 22, 2023 Share Posted December 22, 2023 Anchor is a company from India. According to Jams at Bestoffercountscounts, most of the rubber mount typer products come from India. Link to comment Share on other sites More sharing options...
XframeFX Posted December 23, 2023 Share Posted December 23, 2023 9 hours ago, gungeey said: Perfect replacement for original Made in USA too. I'll betcha mine will look a whole lot better then these when I have them out, like new in fact. If very likely so, I'll post images of them just for kicks.😆 Link to comment Share on other sites More sharing options...
XframeFX Posted December 28, 2023 Share Posted December 28, 2023 On 12/21/2023 at 2:52 PM, Brtele said: I also replaced the filter/pan gasket Brandon, what style filter was in the kit from Fatsco? There's another post on this. Link to comment Share on other sites More sharing options...
EmTee Posted December 29, 2023 Share Posted December 29, 2023 Should be this one... https://www.rockauto.com/en/moreinfo.php?pk=360722&cc=1319183&pt=8600&jsn=906&_nck=Ekt6BqBF1pwlXdx0gYlm1esw98pF26vehMm%2FGG3C%2Fl2QOXSJubi7WSpUmUSdg3OxWOs2f5z9h422EONy36O0PjCuaadDqI1r86y%2FvJ1lBqxeBNhI9mMX8H1x0fHFzmF%2Bemc5SoFjBM4YwvQ2tLgA0bBeGftY6hwHyLHQiRSVBbt6CTUiyOsVm6ULZDb3KHE%2FdcHxolESy83EuTcu3RPj%2BI%2FCM0faq7Mn5XXAbBuqhD3DMjUpPSKqU5XEf8CfHxVk9MM8CXfDCUJPw59gyVyrojeLMveQRoz3U2VdAd%2Bse9afuiexb5vegB%2BeW02B7oJlg42nYlNjJ3ckkiOFknuBJoL8wf5Oyn7IuawiRSLaLpA0KNFJyS4L%2FueERvxVIS3f Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now