hddennis Posted July 20, 2021 Share Posted July 20, 2021 Picked this up at local antique mall and wonder, is it automotive or motorcycle ? Factory tool kit or aftermarket? Any guess's on what square hole is for? Howard Dennis Link to comment Share on other sites More sharing options...
roysboystoys Posted July 20, 2021 Share Posted July 20, 2021 (edited) Hole might be to loosen bolt holding spare down , or could be for jack handle operation. Or? I guess I thought it was obvious it was a tire iron for taking tires on and off the rim. Not every one has used one I realize I thought you were asking about the square hole. Probably came in a tool kit , make unknown to me. Edited July 20, 2021 by roysboystoys (see edit history) Link to comment Share on other sites More sharing options...
wmsue Posted July 20, 2021 Share Posted July 20, 2021 Could be a spoon for fitting a tire onto the rim. Square hole could provide a pivot or leverage point ? Good Luck Bill Link to comment Share on other sites More sharing options...
DFeeney Posted July 20, 2021 Share Posted July 20, 2021 I would say the tool in question is a early jack handle with a tire spoon on each end. Link to comment Share on other sites More sharing options...
Mark Wetherbee Posted July 21, 2021 Share Posted July 21, 2021 I think it’s mid to late 30’s Ford and the square hole is for adjustment of the brakes. 1 1 Link to comment Share on other sites More sharing options...
Dave Mellor NJ Posted July 21, 2021 Share Posted July 21, 2021 36 Ford tire iron and brake adjuster 2 2 Link to comment Share on other sites More sharing options...
drwatson Posted July 21, 2021 Share Posted July 21, 2021 8 hours ago, Dave Mellor NJ said: 36 Ford tire iron and brake adjuster I have one like it. Wondering if it's Ford issue or aftermarket? Link to comment Share on other sites More sharing options...
Mark Wetherbee Posted July 21, 2021 Share Posted July 21, 2021 The iron above is Ford toolbox issue, and I think there’s a much longer one for the Jack handle with the (left end above) rim grab style spoon. There’s tool guides for each of those Ford year kits available somewhere... at least there were. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now