stvaughn Posted October 28, 2018 Share Posted October 28, 2018 For all you guys and gals that tour, especially with cars with only one tail light. What’s the recommended way to add or improve rear visibility. Steve Link to comment Share on other sites More sharing options...
Friartuck Posted October 28, 2018 Share Posted October 28, 2018 I use a turn signal system from Electro Tech: http://turnswitch.com/Turnsignal.htm A system designed by car guys for guys. This controller is flexible enough to handle most light configurations. An article on this is at Second Chance Garage: http://www.secondchancegarage.com/product-reviews/turnsignal-1.cfm Link to comment Share on other sites More sharing options...
MCHinson Posted October 28, 2018 Share Posted October 28, 2018 Switch to LED bulbs for the taillight(s). They are brighter and also require less current. Here is one source: https://www.superbrightleds.com/moreinfo/led-vehicle-replacement-bulbs/1156-led-bulb-19-led-forward-firing-cluster-6v-and-24v-dc-car-classic-car-bulb/511/1695/?utm_source=googlebase&utm_medium=base&utm_content=1156-x19-xV-CAR&utm_campaign=GoogleBaseChild&gclid=CjwKCAjwvNXeBRAjEiwAjqYhFt0DyUo9JaVjyf-V1tB7TWrcrWktcnAX96jnQNJPNES1nn0yYfxdghoCQtkQAvD_BwE 1 Link to comment Share on other sites More sharing options...
Spinneyhill Posted October 28, 2018 Share Posted October 28, 2018 (edited) As well, make sure the one you have is as bright as it can be. The earth or ground at the light is important as is the quality of the reflector inside the light. Can you duplicate that tail light on the other side? Edited October 28, 2018 by Spinneyhill (see edit history) 1 Link to comment Share on other sites More sharing options...
PFitz Posted October 28, 2018 Share Posted October 28, 2018 (edited) 1 hour ago, Spinneyhill said: Can you duplicate that tail light on the other side? If the rear apron has room, some with a car like the OP's find a second tail light and stanchion. Cut, turn, and weld the stanchion to fit out from the right side and splice in wiring to it. BTW, Rhode Island Wire Service can make up original copies of wiring harnesses that incorporate wiring inside the harnesses that uses the original front parking and tail lights as turn signals and four-way emergency flashers, so that the car looks original for anyone not wanting to add on lights that don't look period correct. If adding a second tail light, they only need the length to make it look like part of the original harness. I've done that for many of my customer's 1930-31 cars that were being rewired. Paul Edited October 28, 2018 by PFitz (see edit history) Link to comment Share on other sites More sharing options...
stvaughn Posted October 28, 2018 Author Share Posted October 28, 2018 I would love to duplicate the light on the right side. I’ll do a wanted post to see if anything pops up. Wiring is not an issue. I’m rewiring the car now and have already made provisions for right side lights. Just have to decide what to put there. Steve Link to comment Share on other sites More sharing options...
Guest Posted October 29, 2018 Share Posted October 29, 2018 (edited) You do need the right hand taillight. I have seen a couple of LED bars about two feet long mounted on the edge of the trunk carrier. One of them was wired as a tail light and when the flashers were on the appropriate half flashed. I could not wait to talk to the owner so have no ides where he got it. Edited October 29, 2018 by Guest (see edit history) Link to comment Share on other sites More sharing options...
Spinneyhill Posted October 29, 2018 Share Posted October 29, 2018 You can add an LED bar fairly cheaply. I got mine from http://jandlenterprise.com/products/brakelighter.htm Link to comment Share on other sites More sharing options...
stvaughn Posted October 29, 2018 Author Share Posted October 29, 2018 9 hours ago, Spinneyhill said: You can add an LED bar fairly cheaply. I got mine from http://jandlenterprise.com/products/brakelighter.htm Thanks Spinneyhill, I like that better than some of the other options I’ve been considering. Is it weatherproof? I’m thinking of mounting two along the bottom of the trunk rack. Maybe making the two inner half’s running lights and the outer half’s brake and turn lights. Would that be practical? Link to comment Share on other sites More sharing options...
edinmass Posted October 29, 2018 Share Posted October 29, 2018 FYI- they make led lights that appear dark charcoal or black, and turn red when lit up.......keeps them kind of hidden. I have resisted putting anything on the back of my cars due to appearance issues, but the ones that go from black to red are much less offensive to the eye than the old lights available in the past. Also, LED uses almost no power compared to any other choices. Link to comment Share on other sites More sharing options...
stvaughn Posted October 29, 2018 Author Share Posted October 29, 2018 1 hour ago, edinmass said: FYI- they make led lights that appear dark charcoal or black, and turn red when lit up.......keeps them kind of hidden. I have resisted putting anything on the back of my cars due to appearance issues, but the ones that go from black to red are much less offensive to the eye than the old lights available in the past. Also, LED uses almost no power compared to any other choices. Thanks Ed, do you have a source? Link to comment Share on other sites More sharing options...
lump Posted October 29, 2018 Share Posted October 29, 2018 When I was a kid in the AACA, my dad always worried about fast-moving modern cars failing to see our antique cars when we drove home after an event after dark. He added two period-correct accessory stop lights, and then found some rectangular reflectors (OEM VW, if I recall correctly?) , which fit in between the parallel rear chrome bumper strips on our 23 Hupmobile. Having followed our car in another vehicle a few times and night, I can attest that those reflectors were really quite effective. Link to comment Share on other sites More sharing options...
edinmass Posted October 29, 2018 Share Posted October 29, 2018 Sorry, I don’t have a source. I can’t remember where I saw a display of them, possibly a truck stop or the like. It would be great to get six colts instead of twelve. Some people use the twelve volts with small rechargeable lithium batteries.....very discrete. Most of the custom LED stuff I see is coming from England........not sure if they make it or just market it better. Link to comment Share on other sites More sharing options...
Spinneyhill Posted October 29, 2018 Share Posted October 29, 2018 I am mounting mine as an internal high level brake light in the back window. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now