Mike Macartney Posted September 8, 2018 Share Posted September 8, 2018 Hi, Has anybody any suggestions with what to do with the preparation of the wood on the outside of the trunk area of my 1914 Humberette? I have had lots of experience with painting metal and glass fibre but none with wood. Below is a photo of the left had side of the trunk area where the paint had cracked. I have the same problem with the paintwork on my 1903 Crestmobile, which I believe had been restored in the 60's or 70's. Photo of the cracked paint on the outside of the trunk area of my 1914 Humberette Restoration progress of the Humberette can be viewed at: Link to comment Share on other sites More sharing options...
trimacar Posted September 8, 2018 Share Posted September 8, 2018 Get it down to bare wood, and then treat the wood with either West System or Smith's. These are epoxy, two part, sealant systems, that are mainly used for the marine trade. They will soak into the wood and both seal and strengthen. Then, you won' t get the cracking and other problems inherent in painting non-treated wood. https://www.jamestowndistributors.com/userportal/search.do?refineType=1&sub_attr_name=Brand&refineValue=WEST+System&page=GRID&engine=msn&keyword=west_system_epoxy Link to comment Share on other sites More sharing options...
1937hd45 Posted September 8, 2018 Share Posted September 8, 2018 Ill never forget wet sanding a new Stanley Steamer body at the request of the owner.? Wonder if that West System would allow wet sanding? Bob Link to comment Share on other sites More sharing options...
Luv2Wrench Posted September 8, 2018 Share Posted September 8, 2018 I responded in your other thread. I agree with David, get down to bare wood and treat with West System two-part epoxy. I would also follow with the SPI Epoxy Primer though you might call SPI and ask about applying over West System and/or bare wood. I imagine either (or both) will work but the only recent experience I have is with SPI Epoxy Primer. Way back when we would apply a wood sealer, two coats of polyurethane, rough with 220 and then paint as normal. I find the SPI primer easier to use and apply it after a typical wood sealer. Link to comment Share on other sites More sharing options...
Mike Macartney Posted September 8, 2018 Author Share Posted September 8, 2018 Thanks for all your helpful advice. This is a great forum with plenty of helpful and knowledgeable guys. I hadn't thought about marine applications! I have now sent an email to the company that Luv2Wrench suggested to find out if they will ship to the UK. Thanks again. Mike Link to comment Share on other sites More sharing options...
Luv2Wrench Posted September 8, 2018 Share Posted September 8, 2018 They do ship worldwide and they probably have a distributor in the UK. I guess you should buy everything you need before England breaks off from the entire known world and floats out into the depths of the North Sea. https://www.southernpolyurethanes.com/export-info Link to comment Share on other sites More sharing options...
Terry Bond Posted September 8, 2018 Share Posted September 8, 2018 West System is used in boat construction and repair. It was recommended to me when I redid my Model T Ford wheels. It's easily sanded and produces an outstanding finish that can be primed with automotive paints and then finish coated. It's very durable, fills grain nicely and provides a really smooth base. Best of all, it's durable! Pics show West System after application during the wet sanding process, primed over West System, and a finished wheel. Terry 1 Link to comment Share on other sites More sharing options...
JV Puleo Posted September 8, 2018 Share Posted September 8, 2018 Many years ago I painted a 1905 Cadillac with excellent results. We used a two-part epoxy primer (which was a brand new product at the time) so I am guessing the West Systems primer/sealer that is recommended here is about as good as it gets, especially as it's intended use is in boats which are going to be exposed to a lot more moisture than cars are. I later repeated the process on a 1910 REO and got the same result. Link to comment Share on other sites More sharing options...
8E45E Posted September 11, 2018 Share Posted September 11, 2018 This outfit from England has received high ratings for their products. http://www.craftmasterpaints.co.uk/ I believe they do have a line of paint finishes for wood. Craig Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now