pepcak Posted May 8, 2018 Share Posted May 8, 2018 Hi, what are correct dims for 1928 Master clutch release bearing, especially thickness of it? Somebody in the past modified the clutch to single plate on my car, so trying to to convert it to original setup. Is the bearing the same with STD model? Does anybody have the slider part / bearing retainer #206526 (or the complete assembly w/ bearing) that he can sell? Thanks for any help. Josef Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted May 8, 2018 Share Posted May 8, 2018 (edited) Josef, The clutch bearing itself 36138 is on many cars 1922-24 4 cyl, E-H-K 1921 to 1929 6 cylinder. 1930 ser 40-50-60, 1931 ser 8-60, 8-80, 8-90 So in 1925, same bearing for Master or Standard. My replacement throw out bearing from Bobs is 1" thick (It came as a bearing and a spacer) The #206526 clutch release bearing retainer is 1928 & 29 6 cyl, domestic 1930 ser 40-50-60. If your car is outfitted with a single clutch disc, I would stay with it. A single disc is a better design than the old multi disc units. Hugh Edited May 8, 2018 by Hubert_25-25 (see edit history) Link to comment Share on other sites More sharing options...
pepcak Posted May 8, 2018 Author Share Posted May 8, 2018 Hugh, thanks for information. The execution and condition of the single plate clutch was really bad, cracked disc of blue/yellow color loosely bolted on flywheel with its thickness significantly machined down, loose & broken parts etc. Luckily, they kept the lever and gearbox plate intact. On top of that I am trying to preserve original design as intended 90 years ago. I got original flywheel and clutch assy from Fred R. some tome ago, so the puzzle is slowly becoming complete. Somebody in the past welded up extra material on the retainer to increase its OD to 55 milimeters and used some really massive (OD 125mm, 36mm thick) 3 piece metric bearing (for 55mm shaft), with its axial location shifted forward to compensate missing thickness of the clutch. See attached image. I am thinking to buy a smaller one, with OD 90mm that fits between 3 pins protruding from clutch, and with 55mm ID to fit on (increased) retainer OD, This metric bearing is 25mm thick so it seems a good match with original 1". The disadvantage here is the bearing is only available as 3 piece unshielded design, thus it would require some extra circlip or something to keep the things together. Alternatively I am thinking to have it shielded as one of my friends runs a sheet metal forming shop. Other option seems to be to source original retainer and (replacement) bearing. Josef Link to comment Share on other sites More sharing options...
147 Franklin Airman Posted May 9, 2018 Share Posted May 9, 2018 20 hours ago, Hubert_25-25 said: Josef, The clutch bearing itself 36138 is on many cars 1922-24 4 cyl, E-H-K 1921 to 1929 6 cylinder. 1930 ser 40-50-60, 1931 ser 8-60, 8-80, 8-90 So in 1925, same bearing for Master or Standard. My replacement throw out bearing from Bobs is 1" thick (It came as a bearing and a spacer) The #206526 clutch release bearing retainer is 1928 & 29 6 cyl, domestic 1930 ser 40-50-60. If your car is outfitted with a single clutch disc, I would stay with it. A single disc is a better design than the old multi disc units. Hugh Hi Hugh Can you please confirm that the specs below are correct? Bearing name 7038C bearing New model 7038C Old model 36138 bearing Products types 7038C Angular Contact Ball Bearings Categories Angular Contact Ball Bearings Brands SNR Dimensions (mm) Inside diameter ID d 190 Outside diameter OD D 290 Thickness B 46 Size (IDxODxB)mm 190x290x46 Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted May 9, 2018 Share Posted May 9, 2018 Josef, My original throw out bearing (measuring as close as I can, but I have not removed it from the retainer so my numbers may be a little off. 2.067 ID (52.5 mm) 3.420 OD (86.87 mm) 1" thick The replacement throw out bearing from Bob's Automobilia is part #02135 2.130 ID 3.470 OD .765 thick This comes with a spacer 2.218 ID 2.485 OD .255 thick The bearing that you are showing is not your normal throw out bearing design. If it were me, I would take your retainer to a machine shop and grind off the extra weld that the previous owner added and install a regular throw out bearing from Bob's Automobilia. You want a sheilded or better yet a sealed bearing because there is a lot of friction dust that gets in the clutch area, and will get in the bearing grease and could cause trouble down the road. Hugh 3 Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted May 9, 2018 Share Posted May 9, 2018 147 Franklin, Your bearing specs are correct for the bearing you have shown, but that is a much larger bearing than original, and it is also of a different design. . Hugh 1 Link to comment Share on other sites More sharing options...
pepcak Posted May 10, 2018 Author Share Posted May 10, 2018 Hi Hugh, another forum member here thinks he has complete 1927 Master retainer and bearing assembly that he can possibly miss, so I will wait for his findings. I agree the shielded / sealed bearing is better solution than open 3 piece design, that needs to be axially secured on top of other issues. Josef 1 Link to comment Share on other sites More sharing options...
pepcak Posted August 6, 2018 Author Share Posted August 6, 2018 Well, after turning the slider part down to fit metric bearing ID 55mm, the whole thing disintegrated; apparently it was made up from two pieces. Back to square one: Does anybody have the slider part / bearing retainer #206526 (or the complete assembly w/ bearing 36138) that he can sell? Good original parts preferred. Any help is much appreciated. Josef Link to comment Share on other sites More sharing options...
McCargar Posted August 6, 2018 Share Posted August 6, 2018 I have a complete assembly from a '26/27 standard, surplus to my needs if that's any help. Wayne Link to comment Share on other sites More sharing options...
Fred Rawling Posted August 8, 2018 Share Posted August 8, 2018 Josef, I did not read all the posts. I just skipped to the end. I have a stack of 1928 Master clutches. I was getting ready to send you a couple of 3 leg water tubes for patterns. I could send it with the water tubes. Fred fred.rawling@live.com Link to comment Share on other sites More sharing options...
dracenroc Posted August 29, 2018 Share Posted August 29, 2018 Can anybody tell me how the bearing is installed correctly? I pulled mine and it looks like shown in the picture, don't now where is the worn shaft coming from. Looks like the bearing was turning over.. As far as it was installed the spacer is flush to the slider part and then the bearing itself to the spacer, just wan't to make sure it should be like this. Werner 1 Link to comment Share on other sites More sharing options...
Leif Holmberg Posted August 29, 2018 Share Posted August 29, 2018 Don`t know if this picture will help? Leif in Sweden. Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted August 29, 2018 Share Posted August 29, 2018 Werner, I used a bench vise to help disassemble the clutch bearing from the holder. The original bearing has a slot along the inside of it so that grease can enter the bearing. The replacement clutch bearing from Bob's Automobilia is a spacer and a sealed bearing. If you put grease into the bearing holder, the grease will only lubricate the sliding motion of the holder on the shaft. Hugh 2 Link to comment Share on other sites More sharing options...
dracenroc Posted August 29, 2018 Share Posted August 29, 2018 Thank you Leif, I got this picture too out of the reference book. It looks like the bearing is flush the slider. Hugh, I got the replacement bearing with the spacer and a one like this was already installed. So I will just press it as close to the holder as possible. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now