Guest Mochet Posted June 17, 2012 Share Posted June 17, 2012 Does anyone know of an understanding plater who would acid-copper plate some pitted headlamp rims? I'd like to do the tedious smoothing and buffing myself to save money, and then get them nickel plated.Phil Link to comment Share on other sites More sharing options...
60ch Posted June 17, 2012 Share Posted June 17, 2012 It may take more than one round of copper plating to get the results that you need. Each layer of plating is polished before the next is applied. The problem is that you may not have the level of expertise required to get the layers to the the point where they can be replated . You are asking the plater to be responsible for a final outcome but not letting him be sure the required steps are done correctly. You may find it more costly if the plater has to refinish your work. Good luck with your project, you will learn alot from it if you do find a plater that will do it. Terry Link to comment Share on other sites More sharing options...
Guest Mochet Posted June 17, 2012 Share Posted June 17, 2012 I understand, Terry. These rims were rust-pitted, and then copper and brass plated many years ago. I lightly media blasted them, then did some "fill and smoothing" with tin butter (the powdered tin/flux mixture used in body lead work). They look better now, but I'm thinking a thick copper coat would help with final smoothing. I got a quote for $400 for the complete job, but trying to spend less! My other (simpler) option is to paint the rims black to match the lamp housings.Photos show rims as they appear now.Phil Link to comment Share on other sites More sharing options...
Coley Posted June 18, 2012 Share Posted June 18, 2012 I hope you had all of the original plating stripped from them before you started this project. Link to comment Share on other sites More sharing options...
Guest Foggy norm Posted June 18, 2012 Share Posted June 18, 2012 Even at todays price's, 400$ seems a bit inflated. Link to comment Share on other sites More sharing options...
Friartuck Posted June 18, 2012 Share Posted June 18, 2012 PM sent. Agree $400 seems high for just some bezels. Terry is right, just let a plater do the whole job. You'll be happy in the end. Link to comment Share on other sites More sharing options...
Restorer32 Posted June 18, 2012 Share Posted June 18, 2012 Friartuck speaks truth. Any good plater will likely strip off any work you've already done and start over. If he didn't he would have to warrant your work as well as his. Link to comment Share on other sites More sharing options...
Guest Mochet Posted July 19, 2012 Share Posted July 19, 2012 To supply an end to my plating project: I sent my pitted headlamp rims to a well-known plater who had quoted $40 each for nickel plating. After a couple weeks, they got back to me. It turned out they wanted $200 each for the job. To their credit, they did return the rims at no charge to me. I then sent them to my usual plater, Courtesy Metal Polishing in Villa Park, IL. I sent them the same photos as the first plater. About two weeks passed, and I got them back. The total cost, including postage and nickel plating two thumb screws: $115; exactly as they had originally quoted. They look very good, especially considering one was rusted right through.Phil Link to comment Share on other sites More sharing options...
Friartuck Posted July 21, 2012 Share Posted July 21, 2012 Phil, please post full contact information for the plater you used.Chris Link to comment Share on other sites More sharing options...
Rusty_OToole Posted July 21, 2012 Share Posted July 21, 2012 You can do copper plating at home. Also nickel, cadmium and other types of plating. Look up Caswell Plating they have kits and all the supplies. You can plate all the small parts on your car for less than $400. Link to comment Share on other sites More sharing options...
Joe Block Posted July 22, 2012 Share Posted July 22, 2012 I saw a product out of Europe (Finland? maybe) in a Jay Leno clip, it like a silver mirroring. You epoxy fill all your hole then spray on several layers of the product and replace the chrome with a mirror finish product and clear coat it . I could not tell the difference. the kit were price 3K as I recall. But I saw a before and after and it Show quality, assume it hold up to the weather and elements. Link to comment Share on other sites More sharing options...
MochetVelo Posted July 22, 2012 Share Posted July 22, 2012 Phil, please post full contact information for the plater you used.ChrisCourtesy Metal Polishing - HomeI've used them over the last twelve years or so, and always happy with price and quality.Phil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now