Bill Boudway

Hi, Here's our '26 Chrysler G-70 Phaeton on January 9th 2010 ready to go out for a ride to check out the fuel system improvements. Nice day for a ride. Bill Boudway

Nice, large illuminated light fixture. Pegasus emblem on one side, plain on the reverse. Three 4' florescent lamps on the inside. 120V, 15A electric power. 4' 2" long, 17" wide, and 19" high. $350.00 Free delivery to the AACA annual meeting or northern NJ on 2/12/2010. Bill Boudway gnbboudway@msn.com (585) 394-6172

It's little wonder that the dealers can't find intelligent sales help!!

Aermore exhaust whistle. Brass and cast iron construction with a Fulton diverter valve. Diverter is for 1 1/2" OD exhaust pipe with adaptors for 2 1/4" ID pipe. Cast iron parts are rusted and pitted. Approximately 15" overall length. $185.00 FOB Canandaigua, NY Bill Boudway gnbboudway@msn.com (585) 394-6172

Hi, Only 319 days until Hershey 2010. Be there, or be square!

Hi, "Anyone who isn't scared doesn't know what is happening". So, be scared and also happy. "We're all in this together" Words of wisdom from some long forgotten prophet.

Hi Susan, Thanks for this great idea. I'd like to find a raccoon coat and other clothing to wear when we go out in our "26 Chrysler. PS: Good to have you visit our flea market space at Hershey Bill Boudway

For Sale: 18" wire wheel, 6-bolt 5 1/2" stud pattern, 5 3/4" Hubcap opening. 1932 Chevrolet? $45.00 FOB Canandaigua, NY E-mail for a photo. Bill Boudway gnbboudway@msn.com

For Sale: 14:49 (3.5:1) rear axle gears for 1922-1926 Dodge Brothers. Raise your top speed (or decrease your engine speed) by 15.6% New old stock. Never installed in a car. Sold by Romar in the early 1980's $1800.00 FOB Canandaigua, NY Bill Boudway gnbboudway@msn.com

Hi, Thanks. I'll get those issues out and take a look. Regards, Bill Boudway

Hi, I need info on restoring a vacuum tank. Does anyone have the index reference to the article in Skinned Knuckles magazine? Regards, Bill Boudway

Hi, For those concerned about the ethanol problem, we have ethanol free gas in Canandaigua. Check out the photo See you in Canandaigua 2010 Bill Boudway

Hi, Will the WPC Club have a space at Hershey? If so, what space number? Bill Boudway gnbboudway@msn.com

I've installed an electric fuel pump on our Chrysler and will also add an adjustable fuel pressure regulator. Does anyone have a source for one of these? A few years ago, a friend had similar problems with his Packard Twin Six. He solved it by cutting the volatility of the fuel by adding 20% kerosene to the gasoline. Has anyone tried this? Bill Boudway

Hi, Check out the 10-day weather for Hershey at National and Local Weather Forecast, Hurricane, Radar and Report. Zip code for Hershey is 17033. Looks very typical. Bill Boudway

Hi, Does anyone know where the postcard business that Austie had went? He sold postcards of photos that he took on tours and at meets that he attended. Any leads would be appreciated. Bill Boudway gnbboudway@msn.com

We had our 19 Packard Twin Six delivered to Canandaigua, NY from the Texas panhandle. I started removing parts and found a very much alive black widow spider under the running board. I don't mind a few specimens of wildlife around the place, but this one had to go. Regards, Bill Boudway PS: 32 days until Hershey

Wanted: 1926 Rochester Auto Club (AAA) radiator emblem. Bill Boudway gnbboudway@msn.com

Hi, I'll be there in Space C2I-44, Chocolate Field. Lots of valuable goodies for sale. Help me clean out the garage and make room for the Packard restoration. Bill Boudway

Hi, Thanks much for your quick and helpful reply. I just checked and the Model G70 has the identical adjusting screw. Thanks, again. Bill Boudway

Hi, How is the fan belt adjusted on our 1926 Chrysler Model G70? The belt goes from the crank pulley directly to the water pump pulley. No idler pulley. Does the water pump pulley split with shims between the two halves? Similar to the VW Beetle? Any help will be appreciated. Bill Boudway

Hi, Thanks for your reply. The article was in Skinned Knuckles magazine, October 2007. Very good. If anyone would like a copy, please send me a PM with rour address and I'll send one along. Bill Boudway

Hi, You can also use toothpicks dipped in the epoxy. I use West product. Good lock! Bill Boudway

Does anyone have repair info for repairing a gas gage on our 1926 Chrysler? The gage is the type with a capillary tube between the tank and the readout on the dash. If I remember, there was an article in Skinned Knuckles Magazine some time ago. Any help will be appreciated. Thanks, Bill Boudway:)

Hi, Thanks for all your helpful replies. I found 600 Wt Steam Cyl oil at a local distributor for Mobil products: Deckman Oil in Honeoye Falls, NY, (585) 624-1630 Bad news: I may have to buy a 5-gallon pail! This product is the first lube that was produced by Vacuum Oil Co, Rochester, NY in the 1880's. Vacuum became Mobil. Bill B.