Fred Rawling

I can sell you a pair of 2330 bulbs for $6.00 plus postage. fredrawling@verizon.net.

Can anyone tell me if 8 1/2 inch Liberty lenses are correct for the Standard 6 in the late 1920's and what size the Big 6 used?

I have the 2 front fenders and hood from a 65 Electra. Will they work for you?

I can help you with the seat and probably with the shocks. frawling@verizon.net. Fred

Buicknut@palmnet.com

I have a rear seat bench that I believe came from a 46-48 Buick. I am not sure of the series. If you are interested, send your e=mail address and I will get you some measurements. fredrawling@verizon.net

How many rims do you need? I am in Bellflower, Calif. The price is $25.00 each for nice round rims. Depending on how many you need, I may have to send some of the not so nice but still round ones at $20.00 each. fredrawling@verizon.net Send me your city and zip and I will let you know how much shipping will be. Do not be offended if I take a day or two to answer you. Fred

The block, crank shaft, and head are still available. Still CHEAP.

how much for the top to the oil filter? fredrawling@verizon.net

Try bobsautomobilia.com. He has an online catalogue that you can read or down load.

These fenders were on a 1930 64C chasis. The right one has the bolt holes for the step to get into the rumble seat. However, the fender bolt holes were bondoed up for some reason and they were attached with non origional 1/4 inch bolts to a 2 x 4 screwed to the frame. The bolt holes were dimpled in to hold the bondo so a little straightening is needed after the bondo is removed. They look like 64C fenders. If you are interested, I will send pictures and measurements. No rust outs, a few dents but nothing serious. $125.00 for the pair.

How much for the top to the oil filter?

I need 3 1/2 x 1/8 compression rings and 3 1/2 x 3/16 oil control rings. One of the applications is 1934 Airflow custom Imperial, & CU Any help with a someone selling engine parts in the Los Angeles area would be helpful. fredrawling@verizon.net

I have a filter from late 40's and early 50's that takes a drop in cartridge filter. $20 post paid or ups paid if this is what you are looking for. Bob's Automobilia sells the filters or you can try the local auto parts store fredrawling@verizon.net

I have one for a special in Bellflower, Ca.. Will a Special hood work?

Hood, 2 front fenders, trunk lid, core support, rear bumper, doors from a 2 door car for sale for $50.00 each plus shipping, or make an offer for the lot. fredrawling@verizon.net

Windshield and back glass from 64 Olds full size. It should fit Buick also. $25.00 each plus packing and shipping. fredrawling@verizon.net

Priced reduced. Anybody interested now?

Victor # 904, $85.00. Fits 6 Cyl. 1934 model A; 1935 Model A1; copper-asbestos-steel fredrawling@verizon.net

Victor # 899, new victor # 773. $85.00. Copper-asbestos-copper. Application: Late 1927-29 6 cyl.; Dictator 6 1929-30; Comander 6 1929-30; Studebaker 6-53-54, 1931; 6-55, 1932: 6-56, 1933. Trucks: Model GN-30-40, 1929-30 6; Model S 1931 6 cyl; Model S2 to engine 1T4600, 1932; S6 to eng. 2T4600, 1932; S8 to eng. 3T700, 1932; Model S2 after eng. 1T4600-S4-S6 after eng. 2T4600-S8 after eng. 3T700, 1933-34 ; T2-T4-T7-T8, 1934; "Ace" 1T2- "Boss" 1T6, 1935; 6 Cyl. fredrawling@verizon.net

copper-asbestos-steel head gasket. Victor # 659. The application is Erskin 6 for 1927 to 1929. $85.00 plus postage. fredrawling@verizon.net

I have the block, head, rods, pan, rocker arm, and a few other parts. Make an offer. I expect to take it to the scrap yard next week if I can not find a home for it. fredrawling@verizon.net

I have the cylinder block, head, rods, rocker arm, pan, and a few other parts. Make an offer. It is going to the scrap yard next week if I can not find a home for it. fredrawling@verizon.net

UBB6-ML-211957-ML- moved by SalG

I have the block, head, rods, rocker arm, and a few other parts for this engine. Make an offer before next week. Iron is up to $100. a ton and I am tired of moving it around. fredrawling@verizon.net