Fred Rawling

I am still trying to unload the body and or chasis from a 64 dynamic 88 4 door. It has seats (Maroon) in good condition, good maroon carpet, body including glass from the cowel back and chasis less drive line but it has brakes. The dash is gone. Most of the stainless is gone. The floor pan and trunk pan are in good condition as are the fender wells etc. $75.00 for all or $$ for what you want me to pull depends on how hard and how long it takes. Located in Bellflower, Ca. (by Long Beach). The only reason it is still here is that I have been too busy to haul it to the crusher.

I just bought a 77 Delta 88 Royal for $300.00. I drove it home and it passed the California Smog check with no problems. It was current on the licence so I had no expense there. <P>I spent 3 hours cleaning graffitti off of it and have spent about $100.00 for other parts including new windows on the passanger side that had graffitti scratched in it. I needs the seats recovered and carpet replaced and a new paint job and it will look great. It rides very smooth. It has 89,000 miles on the clock and records that indicate that it is actual mileage.

1958 Hansa Goliath 4 cyl. boxer type engine. Water cooled. It was said to run when removed from the car. $125.00

For Sale: 1958 Hansa Goliath 4 cyl. engine.<P>Water Cooled boxer type engine. Ran when removed from the car. $125.00

Anyone interested. Delivered in the Long Beach, Ca. area. No ignition key, broken rear side window, dirty interior. E-mail me before 8 a.m. Tue or page me at (562) 744-0494 before I get to the scrap yard

Any one near Long Beach, Ca. Interested? $50.00 Delivered. needs ignition key, broken rear side window, dirty interior. E-mail me before 8 a.m. Tue or page me at (562)<BR>744-0494 before I get to the scrap yard.

Complete car in Long Beach, $50.00 delivered in Long Beach area. Clear title and probably 1 year back licence. No ignition key, broken rear side window, dirty seats. E=mail before 8 a.m. Tue or call my pager (562) 744-0494 before I get to the scrap yard

Anyone in the Long Beach, Ca. area interested in a complete car with title and probably 1 year arrears on the licence for $50.00 delivered. The ignition key is lost, one rear side window is broken, anddthe upholstry is dirty. E-mail me before 8 a.m. Tuesday or page me at (562) 744-0494 before I get to the scrap yard with it.<p>[ 06-17-2002: Message edited by: Fred Rawling ]

64 olds 88, windshield and top and side mouldings, rear window, all mouldings around rear window, 4 doors-some with handles, 3 with glass, stearing box, power stearing pump with pulley, crank pulley, maroon seats and carpet, chasis except rear end, 4 wheels and brakes, body from cowel back with good floors and trunk floor, no trunk lid or stainless trim except around door windows and the little pieces at the very rear of the tail fins. What do you need? Cheep.

A few years ago, Jans was still in business in Loa Angeles. Have you tried to find them?

I have a couple of Wards Riverside plugs with 1/2 inch pipe threads. They are nice used condition. Is that what you are looking for?

I have an exhaust manifold gasket and another rectangular gasket that looks like a heat riser gasket. If you can use them, they are $6.00 post paid.

If anyone only needs the flywheel or bellhousing, I have one of each that I would like to sell

70 series drumbs are 2 1/2 inch and interchange from 1950 to 1956. The smaller series drumbs are 1 3/4 inches deep.

Does anyone need a reproduction sunvisor for a 1928 Buick. I have one at the sheet metal shop being copied. The price is $47.50 plus shipping. I keep getting a call here and there to help someone out. Instead of running over there everytime I find some one who needs one, I thought I would ask here for anyone that needs a sunvisor and do it all in one trip. Shipping is extra or you can pick it up in Bellflower, Ca. <P>Also, I need a sunvisor for a 1927 Buick. Can anyone help?

What about buying higher ratio rear end gears and just changing the gears? I remember something about using century gears.

I have these parts from a 61 Invicta 4 DOOR:<P>Back glass, wind wings with metal frame that goes down into the door, glove box door, Invicta name plate from the dash, one front door window with metal trim, & radio knobs.<P>Is there anything here that you can use?

I have one from a 65 Electra 225. Are they the same?

The rear end is gone and the back window trim. I am still trying to find a home for the rest of the parts. All for $75.00 or will part out.

They made them in different sizes. They also made them with adjustable arms.

I have the bolts. They are aproximatley 3.5 inches long. They are off 20 inch solid 6 bolt wheels. I may have the lugs and nuts. What year and model are you looking for?<P>The bolts have good threads and are $2.50 each. I have to pull one out of the wheel to give you a more exact measurement. Let me know if you are interested. Pleas e-maill me. I do not get on here regularly.

If you still need the gas tank sending unit, e-mail me. I have the tank with the unit in it and if you still need it, I will pull it out and check it to see if it works.

Does not run, no history known, out of the car, $50.00. Heads are still on it.

Body from cowel back, 4 doors, seats,carpets, windshield & back glass, rear quarter with good trunk floor, rolling chasis, wheels, stearing column, no dash, or trans., 2bbl carb and air cleaner, alternator, ps pump with pulley. Very reasonable prices. What do you need.

Body from cowel back, 4 doors, seats,carpets, windshield & back glass, rear quarter with good trunk floor, rolling chasis, wheels, stearing column, no dash, or trans., 2bbl carb and air cleaner, alternator, ps pump with pulley. Very reasonable prices. What do you need.