Rowdy Posted December 7, 2013 Share Posted December 7, 2013 I picked these up at a local auction last Saturday. Does anyone know what they fit? There were several hubcaps with the pile of stuff, but have not been able to match them up to any of them looking at pic's on the web. It was suggested on the HAMB that they are likely Mopar. Thanks Rod Link to comment Share on other sites More sharing options...
Rowdy Posted December 7, 2013 Author Share Posted December 7, 2013 Here are the only 4 styles of Mopar hubcaps that fit inside the rings that were with the pile of stuff. The other Mopar hubcaps were 1950's Dosoto and are nearly as big as the rings and have their won valve stem holes. Thanks Rod Link to comment Share on other sites More sharing options...
Chrycoman Posted December 15, 2013 Share Posted December 15, 2013 The rings were used in 1946-47 when whitewall tires were not available. They were held in place by the hubcaps, I believe, and were optional on Plymouth, Dodge, DeSoto and Chrysler cars. Link to comment Share on other sites More sharing options...
Rowdy Posted December 15, 2013 Author Share Posted December 15, 2013 (edited) Were the Dodge and DeSoto hub caps larger than the the Plymouth hub caps in those years? As you can see in the pic's above the 46-48 Plymouth hubcaps that were with the same pile of stuff are too small to help hold these things on. Also if hidden by the hub caps, why would they pin stripe the inside edge as you would never see the stripes? Thanks Rod Edited December 15, 2013 by Rowdy (see edit history) Link to comment Share on other sites More sharing options...
keiser31 Posted December 15, 2013 Share Posted December 15, 2013 Those particular ones with the stripes are not held on by the hubcap. They have those wavy clip items to hold them to the wheel. Link to comment Share on other sites More sharing options...
JACK M Posted December 15, 2013 Share Posted December 15, 2013 Here is a NOS set of 16 inch rings for Mopar. Late thirties vintage. (for sale)The ones on the car are 15s but virtually identical. Link to comment Share on other sites More sharing options...
Rowdy Posted December 15, 2013 Author Share Posted December 15, 2013 Thanks guys, I am guessing they came with the 46-48 Plymouth hub caps then. Now to figure out the SS beauty rings that were in the pile also. Likely they are for the 38 Plymouth hub caps. I think the Dodge hub caps are pickup, so likely did not have them. Rod Link to comment Share on other sites More sharing options...
Guest markrush Posted December 16, 2013 Share Posted December 16, 2013 I would love to know of a source for technical data on postwar Chrysler wheels and trim. I know there were 15" wheels that had bead widths of 6 1/2" and about 5 1/2" and there were wheels that take a 10" hubcap and others that take an 11". Almost nobody that sells the rare stainless trim rings knows exactly which their rings fit. I'm not sure if there are any identifying marks on them. Anyone know of an authoritative source for information on Chrysler wheels and trim? Link to comment Share on other sites More sharing options...
Rusty_OToole Posted December 18, 2013 Share Posted December 18, 2013 Not sure about Chrysler but some other makes switched from 16 to 15" wheels about 1949. Link to comment Share on other sites More sharing options...
Joe Cocuzza Posted December 18, 2013 Share Posted December 18, 2013 Not an expert but I have dealt with this issue before.Chrysler Corp made it very confusingThey used the smaller rims and hubcaps/trim rings for the 7.00/7.20 X 15 tires.Then they went to "balloon" tires in late 47 (8.20 X 15) and that is where the larger rims and hubcap/trim rings came in. Also, they switched rear fenders. The larger tires needed more room so the rear fender doglegs were reduced from approx 6" wide to 2 1/2" wide. I have seen cars with the incorrect fenders.The bolt patterns between the rims are different, too.So if you have a smaller rim you cannot use the wide trim rings. Chrysler did not, to the best of my knowledge, use 16" rims during these years - 46-49There are no identifying marks that I have ever seen on trim rings for Chryslers. You need to be very careful when buying trim rings for Chrysler cars of this era. They all look alike but they truly are not. Link to comment Share on other sites More sharing options...
Guest markrush Posted December 18, 2013 Share Posted December 18, 2013 Thank you, Joe, that is helpful. However, I did once put the narrower rim on my wheel hub and the bolts lined up fine. My car came with the narrow rim as the spare. (If I recall correctly I think it had an old H78-15 tire). I had a flat and was able to mount the spare on to get home. I have since acquired a wide spare wheel and have 7.60 x 15 all around. Their specs said they could go up to a 6 1/2" bead width which just fits the wider rim.What I would love to know is the exact dimensions of the stainless rings that fit the 15" wheel with an 11" hubcap (i.e. what is their exact outside diameter and the exact diameter of the inner opening?) Link to comment Share on other sites More sharing options...
Joe Cocuzza Posted December 19, 2013 Share Posted December 19, 2013 I have some original white ones which should be the same as the stainless.If I remember I will take some measurements Link to comment Share on other sites More sharing options...
Rowdy Posted December 19, 2013 Author Share Posted December 19, 2013 I am pretty sure these are for 16" wheels. There is another set on e-bay identical to the three I have. One of his has been cut down alittle. Since I do not have any Mopar wheels of this vintage I could not see how well they fit. I did try them on a Ford wheel and they stuck out about 1/4". Maybe on a different style they would fit. I may try that tomorrow. Rod Link to comment Share on other sites More sharing options...
c49er Posted December 21, 2013 Share Posted December 21, 2013 Here are a couple pictures of the "Real" correct MoPar 1947-8 Chrysler 6" wide wheel trim rings and what they look like. These fit the heavy chassis cars C38 and C39 Chryslers- the Large bolt pattern. Factory Mopar stainless trim rings use jagged tangs around the outside that partially hold the trim ring to the wheels, then the hub cap covers the center raised portion of the ring.I found these locally after looking for 30 plus years!I'm not sure what the above trim rings are for. There are so many possibilities! Link to comment Share on other sites More sharing options...
Joe Cocuzza Posted December 21, 2013 Share Posted December 21, 2013 Here are a couple pictures of the "Real" correct MoPar 1947-8 Chrysler 6" wide wheel trim rings and what they look like. These fit the heavy chassis cars C38 and C39 Chryslers- the Large bolt pattern. Factory Mopar stainless trim rings use jagged tangs around the outside that partially hold the trim ring to the wheels, then the hub cap covers the center raised portion of the ring.I found these locally after looking for 30 plus years!I'm not sure what the above trim rings are for. There are so many possibilities!Do you want to sell these?????? Link to comment Share on other sites More sharing options...
Guest markrush Posted December 22, 2013 Share Posted December 22, 2013 Thank you c49er. Outer diameter and inner opening diameter would help. The 15" wheel was a measurement at the seat of the bead, and the rim is larger, so when people put these on eBay, I think sometimes they call them a 16" ring. Knowing the actual trim ring diameter and inner opening measurements would be nice because you can always ask them to measure their product. Link to comment Share on other sites More sharing options...
c49er Posted December 22, 2013 Share Posted December 22, 2013 I will measure these trim rings and post the measurements of these 15"X6" chrysler trim rings.Bob Link to comment Share on other sites More sharing options...
Guest olduscars Posted January 31, 2014 Share Posted January 31, 2014 c49er Since you found NOS beauty rings, do you have any extra used beauty rings. I am looking for 2 or 3. I can have them refurbished if they are not too badly dented.bill Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now