1920's Hubcap Wheel Wench. Cadillac?

[Jolly_John]

This is the only 1920's wheel or hubcap wrench I haven't been able to I.D.  Marked with an "A" in a circle. This wrench is 10-5/8" long. The large end opening is 2-1/2" across the flats. The smaller end opening is 1-5/8" across the flats.

 

Any application info would be great. Also, any thoughts on value would be helpful, since I want to get this wrench to someone who can use it, or display it. Thanks in advance for any help, gang. John

[viv w]

With those 2 pins maybe it is for Willy's whippet ????

[Gunsmoke]

Since it will fit at least 3 hub/grease caps, maybe after market.

[sagefinds]

Definitely Cadillac. The octo wrench fits the hubcaps and the nuts that hold the rear hubs on. There is a plate in one or both of the front hubs with two cutouts and the two pins on the wrench fit into those cutouts and screw the plate on or off. The speedometer is driven from inside the RF hub starting in 15 and that plate may be connected to that hub,but it's been awhile since I had them apart.

[Layden B]

Timken wrench, fits their large size car axles ( medium sized trucks) used on:

Cadillac

Lincoln

Cunningham

Winton

Stearns-Knight

Yellow Cab

And other large cars and similar sized trucks!

[Jolly_John]

Thank you for the helpful input thus far, gang. I appreciate the help. John

[Jolly_John]

Again, my thanks to those who took their time to help out. I'm now offering this Cadillac wrench for sale in the "Parts for Sale" area of the forum. John