TerryB Posted December 4, 2021 Share Posted December 4, 2021 Son sent me these photos taken today Dec 4th. I think they are from a monthly gathering at a bagel shop in Mountain View CA. Enjoy! 2 Link to comment Share on other sites More sharing options...
TerryB Posted December 4, 2021 Author Share Posted December 4, 2021 (edited) More pics, yes it’s the Mountain View bagel shop gathering. My son was talking with the Stutz owner, he said the car had just finished a 400 mile tour. Edited December 4, 2021 by TerryB (see edit history) 9 Link to comment Share on other sites More sharing options...
Grimy Posted December 4, 2021 Share Posted December 4, 2021 That's the "Donut Derelicts" in action. And the biggest derelict of them all is my Evil Twin @Bob Jacobsenand his all original (except for the top) 1922 Stutz. Bob is wearing the ball cap in the first Stutz photo. 1 Link to comment Share on other sites More sharing options...
rocketraider Posted December 4, 2021 Share Posted December 4, 2021 What is the big elegant gray 30s sedan in the very first picture? Link to comment Share on other sites More sharing options...
TerryB Posted December 4, 2021 Author Share Posted December 4, 2021 42 minutes ago, rocketraider said: What is the big elegant gray 30s sedan in the very first picture? Looks like a 1936 Dodge. 2 Link to comment Share on other sites More sharing options...
wayne sheldon Posted December 4, 2021 Share Posted December 4, 2021 (edited) Hey there Grimy, does your 'evil twin' know he is supposed to be able to read the Motometer from the driver's seat? Gotta love that Stutz, regardless. Edited December 5, 2021 by wayne sheldon I hate leaving typos! (see edit history) 1 Link to comment Share on other sites More sharing options...
TTR Posted December 4, 2021 Share Posted December 4, 2021 (edited) 29 minutes ago, wayne sheldon said: Hey there Grimy, does your 'evil twin' know he is supposed to be able to read the Motometer from the driver's set? Well, if one doesn’t actually drive a car much, it really don’t matter which way the Motormeter faces or whether it even works. 🙄 Edited December 4, 2021 by TTR (see edit history) Link to comment Share on other sites More sharing options...
Grimy Posted December 4, 2021 Share Posted December 4, 2021 1 hour ago, wayne sheldon said: Hey there Grimy, does your 'evil twin' know he is supposed to be able to read the Motometer from the driver's set? Gotta love that Stutz, regardless. We have had several discussions on that issue. I told him how to index the motometer to the cap--needing only a crayon and a suitable socket to loosen the motometer. But he is an electrical/electronics engineer, and wants to cut holes in varying thicknesses of rubber gaskets until he achieves j-u-s-t the right thickness to allow the business side of the motometer to face the driver. But he hasn't done that yet. My dear friend of 60 years will spend a week doing an engineering plan for it, and 10 minutes doing the actual work. 🙂 I'm standing my for your expected retort, Bob....... 🙂 2 1 Link to comment Share on other sites More sharing options...
TTR Posted December 5, 2021 Share Posted December 5, 2021 1 hour ago, Grimy said: But he is an electrical/electronics engineer, and wants to cut holes in varying thicknesses of rubber gaskets until he achieves j-u-s-t the right thickness to allow the business side of the motometer to face the driver. But he hasn't done that yet. My dear friend of 60 years will spend a week doing an engineering plan for it, and 10 minutes doing the actual work. 🙂 I'm standing my for your expected retort, Bob....... 🙂 Sounds a bit like me, except I don't have any engineering degrees, but I do tend to spend excessive(?) time on planning (and over-analyzing) some of the tasks before I do them. Link to comment Share on other sites More sharing options...
wayne sheldon Posted December 5, 2021 Share Posted December 5, 2021 7 hours ago, Grimy said: We have had several discussions on that issue. I told him how to index the motometer to the cap--needing only a crayon and a suitable socket to loosen the motometer. But he is an electrical/electronics engineer, and wants to cut holes in varying thicknesses of rubber gaskets until he achieves j-u-s-t the right thickness to allow the business side of the motometer to face the driver. But he hasn't done that yet. My dear friend of 60 years will spend a week doing an engineering plan for it, and 10 minutes doing the actual work. 🙂 I grew up with that. My dad was a brilliant engineer in both high power and electronics, down to the sub-component level (basically molecular level!). It is actually quite rare for someone to be top level on both extremes. 5 hours ago, TTR said: except I don't have any engineering degrees, I am in a similar boat. I never got degrees on the wall, although I have had extensive training from numerous real engineers and much of my working career was doing the work of real engineers. I did however learn from my dad's example to NOT go the path of never getting things done because too many hours were spent figuring out how to do a ten minute job. As long as I had him in my life, he wanted to restore an antique car. He never did it. I have restored, driven, and enjoyed a dozen of them. When he died, I had to dispose of a half dozen cars he was still planning to restore. Link to comment Share on other sites More sharing options...
trimacar Posted December 5, 2021 Share Posted December 5, 2021 Looks like a nice gathering of cars. The Stutz is interesting, and that Dodge looks great. Being an engineer, I understand somewhat the planning, on the other hand at some point one has to make things happen. There was an engineer in the company I worked for, and he was promoted to Plant Manager, so I worked for him briefly. One of my duties was buying natural gas, as we were the biggest consumer in our area of same. There are two ways to buy natural gas. One can contract for it at a set price, or one can buy it in an ongoing manner on the spot market. I'd worked up a few scenarios to show how best to proceed, as usually a combination of the two is advised, as some cost is locked and some may go up or down. It's hard to explain when one has locked in all gas at cost of X, when the market price falls to 1/2X.... Two meetings with the Plant Manager, each almost two hours long. No decision from him. A third meeting, and he started going over the same information explained over and over before. I told him that's it, either make a decision or I'm leaving the meeting, we're wasting time. I had another job in the company that I could apply for, as a Capital Project engineer, so when he got mad I promptly applied for and got the other position. I knew I could work with him. He couldn't make a decision, as he was so concerned he'd make the wrong one. It's called "analysis paralysis", one can't make things happen since one is so busy studying options. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now