Summershandy Posted February 21, 2020 Share Posted February 21, 2020 I was reading up on dual point conversions and came across electronic kits. Looks like they're available for 6 volt L8 engines. Anyone have any experience at these? They sound good and I like the way they're more or less hidden under the cap. Could they improve performance or just cause issues? What say you? Link to comment Share on other sites More sharing options...
PONTIAC1953 Posted February 28, 2020 Share Posted February 28, 2020 did you received the six blade fan ? Link to comment Share on other sites More sharing options...
SDLARS Posted March 20, 2020 Share Posted March 20, 2020 I switched my 52 268 over to Pertronix several years ago. Haven't regretted it but haven't tossed my point parts away either. 1 Link to comment Share on other sites More sharing options...
Bloo Posted March 20, 2020 Share Posted March 20, 2020 (edited) On 2/21/2020 at 6:55 AM, Summershandy said: Could they improve performance or just cause issues? What say you? I guess I'll be the one to open the can of worms LOL. Electronic ignitions have 3 main advantages. The first is that fact that rubbing block wear and points wear cause changes in the dwell and timing. This is one chief reason old cars needed "tuning" fairly often, and newer models can go for sometimes years with carburetor screws left alone, sometimes even sealed. The second is that total spark energy is limited by the points. You can only put so much current through them before they burn quickly. If you replace the point contacts with a transistor, you can have more current through the coil (with a different coil), and charge it faster. This can matter quite a bit if the engine has 8 cylinders or more and spins really fast. It can also allow you to run a wider spark plug gap. The wider gap raises the spark voltage. The distributor rotor and other ignition parts would have to be able to deal with more voltage, but only if you widened the spark plug gap. The third is "variable dwell". Points ignitions might like to run a narrower point gap at high RPM for more dwell (more coil charge time), as the ability to keep up charging the coil between firings is quickly falling off. The narrower point gap wouldn't work well at idle. Some electronic ignitions have current limiting built in for the same reason. This is pretty irrelevant for a 6 volt car, because even if the ignition included the feature, AFAIK coils don't exist to take advantage of it. You should notice no difference on a car that has just been tuned. If you replace old used up points with electronic, then you probably will. As for me, I have heard more complaints about electronic ignition conversions on 6 volt cars than success stories, so I'll stick with points for now. Edited March 20, 2020 by Bloo (see edit history) 1 Link to comment Share on other sites More sharing options...
Summershandy Posted March 20, 2020 Author Share Posted March 20, 2020 Thanks Bloo....I'm kinda with ya on that one. I just appreciate the views and opinions and always love to learn a thing or two even if I don't understand it half the time Link to comment Share on other sites More sharing options...
Grimy Posted March 20, 2020 Share Posted March 20, 2020 (edited) Although I have no experience with electronic ignition in my vintage fleet (newest is 1948), I have seen many times in these forums that electronic ignition benefits greatly from (if not requires) an alternator rather than a generator. I'm sure some have had satisfactory performance with generators, but there has been too much complaint otherwise that we should at least take that allegation into consideration. Edited March 21, 2020 by Grimy added missing word (see edit history) 1 Link to comment Share on other sites More sharing options...
carbking Posted March 21, 2020 Share Posted March 21, 2020 We have a checklist of questions we ask carburetor customers (or prospective carburetor customers) when they call us. Once, the first question we asked those with idle issues was have you done a compression test. Now, the first question asked those with idle issues is has someone installed an electronic conversion in the distributor. If yes, the second question is do you still have the points and condenser to reinstall, at least for testing purposes. Jon. Link to comment Share on other sites More sharing options...
Eaglekiller Posted April 10, 2020 Share Posted April 10, 2020 On 3/20/2020 at 7:38 AM, SDLARS said: I switched my 52 268 over to Pertronix several years ago. Haven't regretted it but haven't tossed my point parts away either. Are you still running a generator and 6V? Link to comment Share on other sites More sharing options...
SDLARS Posted April 17, 2020 Share Posted April 17, 2020 Still all 6 volt and a generator. No issues. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now