Dynaflash8 Posted December 1, 2019 Share Posted December 1, 2019 In a few weeks I'll have 5 radial tires (825R15) for sale. They are 21 months old and the spare has never been on the road. Why do I want to sell them? Well, they just don't look right on a 1941 Buick Roadmaster and the AACA deducts two points for each tire (10points). I'm buying 5 7.00x15 Coker bias tires tomorrow (Black Friday sale). These radial tires cost me $1600 and I'm willing to sell them for $750 plus shipping. I hope somebody is interested. Link to comment Share on other sites More sharing options...
deaddds Posted December 2, 2019 Share Posted December 2, 2019 Where are you located? When I get home I will check my tire size on my 37 Olds. Been kicking around swapping to radials. Black or ww? Link to comment Share on other sites More sharing options...
Marty Roth Posted December 2, 2019 Share Posted December 2, 2019 Earl, are these 825R15, or 820R15 ? American Classic with 3-1/4 inch whitewall, or Phoenix with 3 inch whitewall Link to comment Share on other sites More sharing options...
Dynaflash8 Posted December 2, 2019 Author Share Posted December 2, 2019 13 hours ago, deaddds said: Where are you located? When I get home I will check my tire size on my 37 Olds. Been kicking around swapping to radials. Black or ww? If it is an original car, you'll have 16-inch wheels Link to comment Share on other sites More sharing options...
Dynaflash8 Posted December 2, 2019 Author Share Posted December 2, 2019 (edited) Sorry, they are 820R15, same physical size as 7.00x15 bias. Yes, they are Coker American Classic tires. To stand them up you need 45 pounds and they ride like a rock. If you don't mind the squat at lower poundage then you're find. Edited December 2, 2019 by Dynaflash8 (see edit history) Link to comment Share on other sites More sharing options...
37LaS Posted December 7, 2019 Share Posted December 7, 2019 (edited) Curious if they will fit right on my '53 Chevy 210? Running 6.70 x 15 bias now. If they will, I'm your man if they are are still available, please stay in touch. Thank you! Edited December 7, 2019 by 37LaS (see edit history) 1 Link to comment Share on other sites More sharing options...
mike6024 Posted December 7, 2019 Share Posted December 7, 2019 Here is a link to the specs. Please look at the recommended rim width. And other factors that may interest you. ( I am speaking to interested potential buyers ) http://www.cokertire.com/american-classic-820r15-3-1-4-inch-whitewall.html Coker Tire Company's award-winning Bias Look Radial American Classic tire is made in the USA and thoroughly tested to ensure superb quality for your collector vehicle. You can trust that American Classic Wide Whitewall Radial tires are ready for the road, but they're also ready for the show field with beautiful styling and a whitewall that is built in to the tire from day one. The genuine whitewall construction, along with the "pie crust" shoulder and vintage-style tread pattern give this tire the original look, while the steel belted radial internals make it the perfect choice for a car that will see plenty of miles. This is a tubeless tire, but keep in mind that tubes are required on some OEM and reproduction wire wheels. SPECIFICATIONS SKU 700306 Brand American Classic Weight (lbs) 30.0000 GTIN 00842199100808 DOT Approved Yes Product Size 820R15 Sidewall Style Wide Whitewall Width Bias Look Radial 8.20 Radial Aspect Ratio 80 Rim Diameter 15 Tread Width 5.60 Section Width (Actual) 7.62 Overall Diameter 29.91 Load Index 102 Speed Rating S Construction Ply POLY/STEEL 750@30PSI 1920@35PSI Recommended Rim Width 6.00 - 7.00 Tube Type or Tubeless Tubeless Tire Construction Bias Look Radial Link to comment Share on other sites More sharing options...
Marty Roth Posted December 8, 2019 Share Posted December 8, 2019 Your 1953 Chevy 210 tires call for a 4.50 - 5.00 inch rim width - overall diameter 27.25 inches Coker 8.20R-15 calls for a recommended rim width of 6.0 - 7.0 inches - overall diameter 29.91 inches My guess is that your original rims are much too narrow for the 8.20R-15 radial, and they are approximately 10% taller , almost 14% wider, would result in a 10% speedometer error (speedo shows 55 mph, but you're doing over 60 mph) By comparison to the above Radial specs: Coker Classic | 2 3/4 Inch Whitewall | 670-15 $180.00 Coker Classic Whitewall Tires | Coker Classic Whitewall Coker Classic Whitewall bias ply wide tires are made in the USA and have been the choice of classic and hot rod owners for over 30 years. Coker Classic Whitewall tires feature authentic sidewall and tread designs in a premium bias ply tire for collectors. The genuine whitewall is constructed into the tire from the very beginning, for a beautiful and durable tire. DOT and ECE (European Union) approved, and backed by our life of the tread warranty. Please note that dimensions listed tread width, section width and overall diameter are non-scientific and based on an inflated tire, mounted on a wheel. Dimensions may vary due to rim width and inflation pressure. Tread patterns and sidewall styles vary, please click on individual tires below to view photos. SPECIFICATIONS SKU 57700 Brand Coker Classic Weight (lbs) 23.0000 GTIN 00842199104547 Product Size 670-15 Sidewall Style Wide Whitewall Width Bias Ply 6.70 Rim Diameter 15 Tread Width 4.50 Section Width (Actual) 6.70 Overall Diameter 27.25 Construction Ply 4 PLY POLY 750@30PSI 1550@32PSI Recommended Rim Width 4.50 - 5.00 Tube Type or Tubeless Tubeless Tire Construction Bias Ply Link to comment Share on other sites More sharing options...
Bloo Posted December 8, 2019 Share Posted December 8, 2019 (edited) I too would go for 6.70-15, the stock size. It just looks better IMHO. Especially with the narrower wide whites as shown in the 1953 print ads. However, if you want the big tires, I think it will work. I ran 235-70-15 (huge) radials on my 53 Bel-Air for a while when I was a teenager. It worked fine, and I'm sure they were way out of spec for the rims. They probably touched at full steering lock, I don't recall. If you have a stickshift like I did, you might welcome the taller gearing. It was 3.73 or so, and just fine on 6.70-15 tires, but the speed limit was 55 MPH then. The stickshift engine still has cast iron pistons and squirt gun oiling like a 216, and too much RPM is always a concern. If you have a Powerglide, I have no idea whether taller tires would be a good thing or not. Edited December 8, 2019 by Bloo (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now