Dean3326 Posted April 19, 2019 Share Posted April 19, 2019 Need a clutch release bearing and release collar that holds it. I understand an Auburn has similar parts.on the photos the items are # 10 and # 11. looking for any help. Link to comment Share on other sites More sharing options...
keiser31 Posted April 20, 2019 Share Posted April 20, 2019 (edited) Try Olcar Bearing....(for the bearing, at least).... Olcar Bearing Co (910) 693-3324 135 James Creek Rd Southern Pines NC 28387-6833 Edited April 20, 2019 by keiser31 (see edit history) 1 Link to comment Share on other sites More sharing options...
Spinneyhill Posted April 20, 2019 Share Posted April 20, 2019 2 hours ago, Dean3326 said: Need a clutch release bearing and release collar that holds it. I understand an Auburn has similar parts.on the photos the items are # 10 and # 11. looking for any help. What type is the bearing? Is it carbon, or tapered roller, or balls, or cylinderical roller or ? Link to comment Share on other sites More sharing options...
Spinneyhill Posted April 20, 2019 Share Posted April 20, 2019 2 hours ago, Dean3326 said: Need a clutch release bearing and release collar that holds it. Anything stamped onto the bearing? and what brand, if so? Link to comment Share on other sites More sharing options...
Spinneyhill Posted April 20, 2019 Share Posted April 20, 2019 (edited) Timken list this one: and this one: Edited April 20, 2019 by Spinneyhill (see edit history) Link to comment Share on other sites More sharing options...
edinmass Posted April 20, 2019 Share Posted April 20, 2019 Machine a new collar, and use a modern over the counter bearing......it will save time and money. Parts are just about impossible. Link to comment Share on other sites More sharing options...
Spinneyhill Posted April 20, 2019 Share Posted April 20, 2019 (edited) What Edinmass said. I found a couple of possible bearings for you anyway. The Timken Thrust Bearing catalogue is downloadable. Edited April 20, 2019 by Spinneyhill (see edit history) Link to comment Share on other sites More sharing options...
Rusty_OToole Posted April 21, 2019 Share Posted April 21, 2019 The broken collar is the hard part to replace. Can you give dimensions, like the pivot pin size and outside diameter? Maybe there is another more common one that can be adapted. Link to comment Share on other sites More sharing options...
Otahuhu Posted April 23, 2019 Share Posted April 23, 2019 What you have is a Borg and Berg 11Q These were used on a number of vehicles eg 1928 Stutz The bearing is a carbon one maybe a later had a roller Thrust Bearing eg 1929 Stutz There are clutch holders that with a bit of modification can be used The hinge pins if worn can be repaired(turned down) then pressing on the inner race of a needle bearing RegardsLen Link to comment Share on other sites More sharing options...
Otahuhu Posted May 9, 2019 Share Posted May 9, 2019 have a look on e-bay as there are Auburn made thrust bearings for sale 3 inch OD by 2 inch bore Regards Link to comment Share on other sites More sharing options...
Attitude928 Posted October 13, 2019 Share Posted October 13, 2019 Back from the shop. Running great! Thanks to Dean and all forum members who provided input for the repair. Link to comment Share on other sites More sharing options...
edinmass Posted October 13, 2019 Share Posted October 13, 2019 Great. Any photos showing how the service went? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now