Foxlovescars Posted August 12, 2013 Share Posted August 12, 2013 I researched the forum and could find very little current information. I do not want to lower my car, Has anyone replaced their front AND rear shocks lately and had good results with the brand/type they used? I do not want to lower my car, just replace the age-old shocks that came with the car when I bought it. I have read here on the forum that gas shocks are a must. Your thoughts and stories please. (Also, as a side note, can someone please tell me which Icon in the message screen I hit so that my "enter" key works again when I am typing a message? I haven't been able to skip lines for a while now.) Thanks, and thanks, Frank Link to comment Share on other sites More sharing options...
RivNut Posted August 12, 2013 Share Posted August 12, 2013 (edited) Monroe makes a Sensa-Trac just for our cars. I got f & r pairs not too long ago from Rock Auto for my '63 (which is still on the back burner.) Very reasonable couldn't - pass up the price and availability. Monroe part #'s 5759 and 5760. Currently Rock Auto shows them for $16 plus change each. That's less than $50 for all four. I've got them on my '64 and really like them for OE replacements.Ed Edited August 12, 2013 by RivNut (see edit history) Link to comment Share on other sites More sharing options...
Guest onedesertdog Posted August 13, 2013 Share Posted August 13, 2013 I researched the forum and could find very little current information. I do not want to lower my car, Has anyone replaced their front AND rear shocks lately and had good results with the brand/type they used? I do not want to lower my car, just replace the age-old shocks that came with the car when I bought it. I have read here on the forum that gas shocks are a must. Your thoughts and stories please. (Also, as a side note, can someone please tell me which Icon in the message screen I hit so that my "enter" key works again when I am typing a message? I haven't been able to skip lines for a while now.) Thanks, and thanks, FrankI don't like to give out wrong info, and I could be wrong, but I believe you click on Settings. Scroll down to General Settings, then down to Message Editor and click on STANDARD Editor.Hope it works, and if not, someone for sure will chime in with the correct way to do it.... Link to comment Share on other sites More sharing options...
Foxlovescars Posted August 14, 2013 Author Share Posted August 14, 2013 Buddy:Thanks for taking the time to respond to my question about why the "enter" key on my computer keyboard would not work while I was trying to key in text for threads or to make a reply. The "enter" key only became active when I switched to "Basic Editor". Thank you very much for the tip! Frank Link to comment Share on other sites More sharing options...
Ted "Wildcat65" Nagel Posted August 15, 2013 Share Posted August 15, 2013 These are high priced but really good- fixed my ride really well.1963 1964 1965 Buick Riviera Bilstein Shock Set New | eBay Link to comment Share on other sites More sharing options...
RockinRiviDad Posted August 17, 2013 Share Posted August 17, 2013 I plan on buying Bilstein shocks ($400 a set…ouch) for my 65 Riv too. I've heard/read nothing but good things about them. But I will be minus 2" on the ride height. Someone using Bilsteins on a stock height car might chime in. Link to comment Share on other sites More sharing options...
RivNut Posted August 17, 2013 Share Posted August 17, 2013 I copied and pasted this from the Monroe website. If your car doesn't fit into the categories listed below, I don't think you need a gas shock. Unless you're going to try to set some new ET for driving down Mulholland Drive.The development of gas charged shock absorbers was a major advance in ride control technology. This advance solved many ride control problems which occurred due to an increasing number of vehicles using uni-body construction, shorter wheelbases and increased use of higher tire pressures. An additional benefit of gas charging is that it creates a mild boost in spring rate to the vehicle. This does not mean that a gas charged shock would raise the vehicle up to correct ride height if the springs were sagging. It does help reduce body roll, sway, brake dive, and acceleration squat. Link to comment Share on other sites More sharing options...
Guest Rob J Posted August 21, 2013 Share Posted August 21, 2013 I purchased an OEM replacement set from CARS. Looks to be of good quality. Link to comment Share on other sites More sharing options...
DualQuadDave Posted August 24, 2013 Share Posted August 24, 2013 I have run and installed KYB, Monroe, Bilstein and QA1 on 64 & 65 Rivi's and the QA1's are by far the best. Also by far the most expensive...and require light modification of the front lower control arm and I had to make custom tie-bars for them to physically mount properly. Little bit of work, but so worth it. The Bilstein's are the best you can get for a stock replacement, and yes, they are worth the $100 each vs. $16 for a whatever China shock. It really depends on how much and how you drive your car. If it is a garage queen, the $16 shocks are fine. If you actually take your car out and use it, then the Bilsteins are the way to go. I put a set on a customer's 65 Rivi which he drives to work everyday. That, rear solid Panhard bar bushings and the Addco giantor front sway bar make these cars work 1000% percent better. The factory suspension design is great, just needed some minor upgrading. Link to comment Share on other sites More sharing options...
RivNut Posted August 24, 2013 Share Posted August 24, 2013 That, rear solid Panhard bar bushings and the Addco giantor front sway bar make these cars work 1000% percent better. The factory suspension design is great, just needed some minor upgrading.DQD,Can you supply some additional info on the sway bar you mention here? Link to comment Share on other sites More sharing options...
RivNut Posted August 24, 2013 Share Posted August 24, 2013 That, rear solid Panhard bar bushings and the Addco giantor front sway bar make these cars work 1000% percent better. The factory suspension design is great, just needed some minor upgrading.DQD,Can you supply some additional info on the sway bar you mention here? Link to comment Share on other sites More sharing options...
DualQuadDave Posted August 24, 2013 Share Posted August 24, 2013 DQD,Can you supply some additional info on the sway bar you mention here?Addco #ACO-2062 1.25in front sway bar. Summit/Jegs has them. Biggest you can get and work good. Link to comment Share on other sites More sharing options...
RivNut Posted August 25, 2013 Share Posted August 25, 2013 Thanks,Ed Link to comment Share on other sites More sharing options...
Guest dirtylegs396 Posted July 25, 2014 Share Posted July 25, 2014 (edited) Can anyone tell me how to get the top rear shock bolts to stop turning so I can replace the shocks on a 1967 Riviera? I can get a wrench on 1 of them but not the other. HELP ME !!! PLEASE ! Edited July 26, 2014 by dirtylegs396 (see edit history) Link to comment Share on other sites More sharing options...
Guest dirtylegs396 Posted July 26, 2014 Share Posted July 26, 2014 Well,I figured it out. Had to take the wheel off and go arm pit deep but I did get it. Thanks anyways. Link to comment Share on other sites More sharing options...
kdml Posted July 27, 2014 Share Posted July 27, 2014 I have run and installed KYB, Monroe, Bilstein and QA1 on 64 & 65 Rivi's and the QA1's are by far the best. Also by far the most expensive...and require light modification of the front lower control arm and I had to make custom tie-bars for them to physically mount properly. Little bit of work, but so worth it. Dave, would be interested in more info on the modifications you made to run the QA1 shocks and part numbers. I was looking for an adjustable shock for my '65 and the QA1'a might be what I want. I already have the Addco front bar and a Mako rear bar (http://www.mako.com.au). Springs are slightly stiffer then stock and 1" lowerThanks Link to comment Share on other sites More sharing options...
fatbuick Posted July 31, 2014 Share Posted July 31, 2014 I'm very happy with the Bilstein shocks sold by member George Hussey in the Riview. No mods required and suit standard height or GS height Riv. The Sensa-tracs were way to floaty at highway speed for my liking. Contact George through his site www.autoatlanta.comI also have a heavier front sway bar and a mako rear sway bar kit which we had designed amnd made. Minimal body roll. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now