Ken_Lincoln Posted November 7, 2012 Share Posted November 7, 2012 Ian ... I know a few sites to make "other things" bigger..... but not an Avatar Link to comment Share on other sites More sharing options...
Guest cadaber Posted November 20, 2012 Share Posted November 20, 2012 Ok...I made it out to the old 34 today for some pics, hopefully they are descent enough for anyone that was asking questions about parts available. Let me know if anyone has any further questions. Cheers Link to comment Share on other sites More sharing options...
Guest lowphat1 Posted November 20, 2012 Share Posted November 20, 2012 anybody claimed any of the dash knobs yet? Link to comment Share on other sites More sharing options...
knobless Posted November 20, 2012 Share Posted November 20, 2012 I need drivers side door handles both front and back and what do you want for the rear vent windows? also need the ignition, complete dash to coil unit.... Link to comment Share on other sites More sharing options...
Guest cadaber Posted November 20, 2012 Share Posted November 20, 2012 I have to look thru all the posts on this thread, I will go thru them and see who has asked for what. I have received a few messages I have yet to open as well. Link to comment Share on other sites More sharing options...
knobless Posted November 20, 2012 Share Posted November 20, 2012 (edited) rear vent windows with the cranks and knobs, both drivers side door handles and the ignition from dash to coil with key if you have it, if no key thats fine too. thanks steve in NHalso shifter knob (white , I see noone else has asked for it yet so..... Edited November 21, 2012 by knobless added text (see edit history) Link to comment Share on other sites More sharing options...
1936 D2 Posted November 21, 2012 Share Posted November 21, 2012 Hi "cadaber"... I would also have an interest in the (kind of beat up) grill shell ornament if that is still available, along with the earlier mentioned front bumper to frame mounting bolt cover(s). Thanks! Have a great Holiday! Link to comment Share on other sites More sharing options...
bbbbbb9 Posted November 21, 2012 Share Posted November 21, 2012 Windshield crank mech Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted November 21, 2012 Share Posted November 21, 2012 Hi Mark,Have a look at my PM and let me know what you can come up with.CheersIan Link to comment Share on other sites More sharing options...
Tinkeys Posted November 21, 2012 Share Posted November 21, 2012 (edited) Would like a bumper overrider or set and grill insert if there is any available cheers Tony ! Edited November 21, 2012 by Tinkeys Forgotten (see edit history) Link to comment Share on other sites More sharing options...
34DodgeCoupe Posted November 21, 2012 Share Posted November 21, 2012 I am still interested in grille shell.Thanks,Dan Link to comment Share on other sites More sharing options...
Guest 35dodgepickup Posted November 21, 2012 Share Posted November 21, 2012 Need front bumper and brackets, fenders, running board brackets, grill and mascot. Thank you Link to comment Share on other sites More sharing options...
Guest 1930 Posted November 21, 2012 Share Posted November 21, 2012 I would like to save the vanity set/ashtray and the pull assist cords before they are gone completely. Thanks Link to comment Share on other sites More sharing options...
Guest ceebeethree Posted November 22, 2012 Share Posted November 22, 2012 (edited) Looking for three simple parts:* The two hood latches at the rear of the hood -- they attach to the side filler panel* The about 1" wide bumper piece that is along the front fender that keeps the hood side aligned.I can send pictures of both if required. Edited November 22, 2012 by ceebeethree typo (see edit history) Link to comment Share on other sites More sharing options...
GDenton Posted November 26, 2012 Share Posted November 26, 2012 I am interested in the right front fender, and both splash aprons if the car has a 111" wheelbase. Thanks Link to comment Share on other sites More sharing options...
Guest Jen_ Posted November 26, 2012 Share Posted November 26, 2012 I am interested in the right front fender, and both splash aprons if the car has a 111" wheelbase. Thanksthe car is longer wheelbase as i have one here , which i will list for sale when i have timeJen Link to comment Share on other sites More sharing options...
elevdoc5 Posted November 28, 2012 Share Posted November 28, 2012 Hi I Have been trying to contact you I have not received any responce pleae contact me at elevdoc5@aol.com or call me At 781 733 3880 thanks Jim Link to comment Share on other sites More sharing options...
elevdoc5 Posted November 29, 2012 Share Posted November 29, 2012 HI mark , I have been trying to contact you for a while with no responce Please contct me at elevdoc5@aol.com or call me at 781 733 3880 thanks Jim Link to comment Share on other sites More sharing options...
knobless Posted December 10, 2012 Share Posted December 10, 2012 Jen I did find a set of rear vent windows , in FL. thanks for your help..and bytheby how is the remodeling going? good luck there, hope all is well.. Link to comment Share on other sites More sharing options...
Guest Jen_ Posted December 10, 2012 Share Posted December 10, 2012 Jen I did find a set of rear vent windows , in FL. thanks for your help..and bytheby how is the remodeling going? good luck there, hope all is well..glad you did find some , sorry i wasnt able to help. i'm trying to order roofing shingles nextJen Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted December 11, 2012 Share Posted December 11, 2012 Hi Jen,Do you have the rear 1/4 windout vent window seals for a 34 ?I'm only after one side but I have to look to see which one it is if you have somethingCheersIan Link to comment Share on other sites More sharing options...
Guest Jen_ Posted December 11, 2012 Share Posted December 11, 2012 Hi Jen,Do you have the rear 1/4 windout vent window seals for a 34 ?I'm only after one side but I have to look to see which one it is if you have somethingCheersIani very much doubt i have what you want . this car is basicly a shell with just a few extra items. i probably shouldnt have bought it but i didnt want it to go to scrap yard eitherJen Link to comment Share on other sites More sharing options...
elevdoc5 Posted December 11, 2012 Share Posted December 11, 2012 Hi Jen , do you have the ashtrys for the rear widows? let me know thanks Jim elevdoc5@aol.com Link to comment Share on other sites More sharing options...
Guest Jim 33 Posted December 16, 2012 Share Posted December 16, 2012 Hi Ian, do you know Rob Munston in Queensland? Might be a good contact for parts "Down Under". email rob@munston.com cadaber, you said the car was destroyed by Hurricane Katrina, did you get the car in Gulfport? Knew a couple with a nice car, haven't seen them in several years, wonder if you have it? Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted December 16, 2012 Share Posted December 16, 2012 Hi JIm,I've heard of the name but didn't have contact details.....now I have I'll contact himThanks for thatIan Link to comment Share on other sites More sharing options...
bbbbbb9 Posted December 18, 2012 Share Posted December 18, 2012 Has anyone heard back from the original poster? Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted December 18, 2012 Share Posted December 18, 2012 Hi bbbbbb9,Mark I think is in the Army and dosn't get much time at home. When he does he tries to get a few things done on his car.You may not hear from him for 6 months but he will eventually get back to you ( us ).I've also asked him for some parts but I know it will take a while for him to get to the car.CheersIan Link to comment Share on other sites More sharing options...
knobless Posted December 18, 2012 Share Posted December 18, 2012 (edited) Hi bbbbbb9,Mark I think is in the Army and dosn't get much time at home. When he does he tries to get a few things done on his car.You may not hear from him for 6 months but he will eventually get back to you ( us ).I've also asked him for some parts but I know it will take a while for him to get to the car.CheersIanHi Iana bit of a favor, can you take a picture of the seal used on your rear window? ordered one and it seem to me that it will not be weather tight once installed, when you have time no rush" Edited December 18, 2012 by knobless misspelling (see edit history) Link to comment Share on other sites More sharing options...
Guest 1930 Posted December 18, 2012 Share Posted December 18, 2012 Hi bbbbbb9,Mark I think is in the Army and dosn't get much time at home. When he does he tries to get a few things done on his car.You may not hear from him for 6 months but he will eventually get back to you ( us ).I've also asked him for some parts but I know it will take a while for him to get to the car.CheersIanHe should have titled the post Dodge parts will be avail someday Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted December 19, 2012 Share Posted December 19, 2012 Sorry, my rear window seal was a crumbling mess when I bought the car and there is nothing left of it.Out of interest, where did you order it from ?Ian Link to comment Share on other sites More sharing options...
knobless Posted December 22, 2012 Share Posted December 22, 2012 Sorry, my rear window seal was a crumbling mess when I bought the car and there is nothing left of it.Out of interest, where did you order it from ?Ianwww.Classic-Car-Ads.com or www.Classic-Classified-Ads.complalso waiting on a sample from another company, Link to comment Share on other sites More sharing options...
Silverdome Posted December 28, 2012 Share Posted December 28, 2012 Mark, I would be interested in the Steering Wheel with horn buttton and ring plus the nut, key and washer. Link to comment Share on other sites More sharing options...
Guest MyCarz Posted December 28, 2012 Share Posted December 28, 2012 Quite a list of bone pickers trying to keep old Mopars rolling . I'd be interested in rear bumper & brackets, tail lights & stands, spare cover if there & not spoken for yet. Link to comment Share on other sites More sharing options...
Guest vettemanz51 Posted January 21, 2013 Share Posted January 21, 2013 Need the parts that hold the hood down. Link to comment Share on other sites More sharing options...
Guest MyCarz Posted January 21, 2013 Share Posted January 21, 2013 Ok...I made it out to the old 34 today for some pics, hopefully they are descent enough for anyone that was asking questions about parts available. Let me know if anyone has any further questions. CheersCan't tell from pic if the rear bumper in back seat is complet. Could use rear bumper or left 1/3 if broken. Link to comment Share on other sites More sharing options...
knobless Posted January 22, 2013 Share Posted January 22, 2013 Need the parts that hold the hood down.I bought a repro set on ebay not cheap, have an old set off my car but they do have a crack in them,,,,,I may sell. Link to comment Share on other sites More sharing options...
knobless Posted January 22, 2013 Share Posted January 22, 2013 also waiting on a sample from another company,This seal is not correct for 34 Dodge rear window, but I have found one that has the weather tight lip.....if you are looking for it contact me.... Link to comment Share on other sites More sharing options...
Guest vettemanz51 Posted January 25, 2013 Share Posted January 25, 2013 Okay for all you car buffs out there. I have done everything I can think of to get my brakes to bleed but can't get it right yet. I have a new question here it is. When I try to bleed my brakes the vent holes in the plug on top keeps squirting out fulid. What have I done wrong?? Any help greatly appreciated. Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted January 25, 2013 Share Posted January 25, 2013 Try replacing the plug. The vent should work the opposite to what your getting.Ian Link to comment Share on other sites More sharing options...
Guest vettemanz51 Posted January 26, 2013 Share Posted January 26, 2013 I tried putting a solid plug in there and it does the same thing. Is it possible when I rebuilt the master I put something in wrong. I am a pretty good mechinic and I have done masters before but maybe I did something wrong. What do you think?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now