1937hd45 Posted October 23, 2010 Share Posted October 23, 2010 What would a chrome spear side trim fit with a GM part number 8701028 ? Link to comment Share on other sites More sharing options...
Mark Shaw Posted October 23, 2010 Share Posted October 23, 2010 Might do better with photos.... Link to comment Share on other sites More sharing options...
1937hd45 Posted October 24, 2010 Author Share Posted October 24, 2010 Its 40 3/4 inches long 9/16 wide with a rib in the center, both ends are flat, may be a door trim piece. From the '60's or '70's I'd gress. Might do better with photos.... Link to comment Share on other sites More sharing options...
Jim Rohn Posted October 24, 2010 Share Posted October 24, 2010 again, a picture is worth a 1000 words or dimensions Link to comment Share on other sites More sharing options...
1937hd45 Posted October 24, 2010 Author Share Posted October 24, 2010 Here ya go. Link to comment Share on other sites More sharing options...
keiser31 Posted October 24, 2010 Share Posted October 24, 2010 I would guess late 1930s or early 1940s. Link to comment Share on other sites More sharing options...
1937hd45 Posted October 25, 2010 Author Share Posted October 25, 2010 No, It's still in the GM wrapper so I can't be over 30 years old IMO.I would guess late 1930s or early 1940s. Link to comment Share on other sites More sharing options...
Larry Schramm Posted October 25, 2010 Share Posted October 25, 2010 Can you post a picture of both sides of the wrapper & part? Link to comment Share on other sites More sharing options...
elcamino72 Posted October 25, 2010 Share Posted October 25, 2010 What is the group # that way someone with the old parts books can quickly look it up. Link to comment Share on other sites More sharing options...
1937hd45 Posted October 25, 2010 Author Share Posted October 25, 2010 What is a "group number"?:confused:What is the group # that way someone with the old parts books can quickly look it up. Link to comment Share on other sites More sharing options...
Larry Schramm Posted October 26, 2010 Share Posted October 26, 2010 If you take a good picture of the side of the package with the part number and other numbers, we will be able to help a lot more. The group number is the number that GM parts categorized parts into like chapters in a book. They are among others engine, body, transmission, electrical, etc... Link to comment Share on other sites More sharing options...
1937hd45 Posted October 26, 2010 Author Share Posted October 26, 2010 Here is the back of the package numbers are 8701028 GR 12 114 BD8 MLDG Link to comment Share on other sites More sharing options...
Guest my3buicks Posted October 26, 2010 Share Posted October 26, 2010 I looked in the Buick Master Parts book ending in 1972 - it appears to be a rear door molding but no exact match in the Buick book, close numbers in the 69 & 70 range. Someone with a Caddy book check, it may be 69/70 Cadillac rear door body side molding. Link to comment Share on other sites More sharing options...
Larry Schramm Posted October 26, 2010 Share Posted October 26, 2010 The part is definately after 1968 is when GM Parts was created. Link to comment Share on other sites More sharing options...
Jim Rohn Posted October 31, 2010 Share Posted October 31, 2010 (edited) CLOSE to 71 Chevy numbers too, it may be OldsFOR SURE a REAR door molding (the Group number makes it so), so that makes it a 4 door or station wagon application Edited October 31, 2010 by Jim Rohn (see edit history) Link to comment Share on other sites More sharing options...
Roger Zimmermann Posted November 22, 2010 Share Posted November 22, 2010 This is a '69-70 Cadillac rear door molding for models 68249, 68349 and 68369 (Calais and de Ville). I have the parts books for 1950 to 1983 Cadillacs. Link to comment Share on other sites More sharing options...
Guest my3buicks Posted November 22, 2010 Share Posted November 22, 2010 Yahoo, I guessed that one right : ) Link to comment Share on other sites More sharing options...
1937hd45 Posted November 23, 2010 Author Share Posted November 23, 2010 Thank you! Never thought the correct answer would come from so far away. Best wishes, Bob:)This is a '69-70 Cadillac rear door molding for models 68249, 68349 and 68369 (Calais and de Ville). I have the parts books for 1950 to 1983 Cadillacs. Link to comment Share on other sites More sharing options...
Roger Zimmermann Posted November 23, 2010 Share Posted November 23, 2010 Thank you! Never thought the correct answer would come from so far away. Best wishes, Bob:)Bob, this is one of many surprises in the life! I forgot to add that LH & RH are identical. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now