Bill Boudway

Hi, From the Brigham book: !st Series serial numbers go from 80.000 in June 1915 to 87,787 in August 1916 . Using some math, you should be able to come close to a "birth" date. Next would to be get dirty and look for casting dates on the engine base (underneath), the transmission case (on the side), and on the differential housing(don't remember where). You have to assume a few days to finish the car to get the actual shipping date. Dan Summer has a 1st/2nd Series that he tours with. Good luck, Bill B. PS th jcrow. My preference is a 3rd Series. 7-pass solon touring

Trim parts for 1964 Corvair. NORS from Clark's Corvair, in original packing. Part numbers are from Clark's catalog. 1 #C-273 front "grill" 1 #C-7920 "CORVAIR" letters with round studs 1 #C-7921 "CORVAIR" letters with square studs 1 #C-2237 crossed flags 2 #C-2234 "MONZA" side emblems $200.00 + S&H. Good check or PayPal. Will not separate Bill Boudway gnbboudway@msn.com

For sale: 2nd Series Packard twin Six gas tank. 28 3/4" L, 15" X 12 1/2" cross section. $648.00 FOB Canandaigua, NY gnbboudway@msn.com

Hi Mike, I have a copy of he rims, wheels, and parts catalog. Unfortunately, it only goes back to 1917. Regards, Bill B.

For sale: Pair of standard headlights for 3rd Series Packard Twin Six, with mounting bar. $400.00 FOB Canandaigua, NY. Buyer pays for packing and freight. E-mail with your questions. gnbboudway@msn.com

The Chrysler Master Parts List. For All Models Prior To 1934. Estimated over 800 pages. Reprint by Crank'en Hope Publications. 8 1/4" X 6 1/2" , 1 1/2" thick Fair to poor condition, but all there. $50.00 + $5.00 shipping to a US address. Good check or PayPal. Bill Boudway gnbboudway@msn.com (585) 394-6172

Hi, It will be time for MOXIE tasting again this year. Thursday afternoon, 10/8 at 4:00PM. Rain or Shine Space # C2I-44 in the Chocolate Field. That's Cee Two Eye forty four, not Cee Twenty One forty four. Be there!! Bill Boudway

Hi Folks, I checked the chassis section of the 2015 Judging Manual and find no mention of guidelines for finish on rims. What are the correct finishes and dates for chrome, cadmium, zinc, or paint on rims? We have a '26 Chrysler that is original and the rims are either zinc or cadmium. I've judged earlier vehicles with the rims painted black. No deductions. I see vehicles of the cjassic era with chrome rims. Your comments, please. PS: Would cBen take a look and post a reply/

Hi, What is the correct automatic transmission fluid for a 1964 Corvair Powerglide transmission? Thanks

Hi, Green is correct.

Hi Peter, Thanks for your help with this. Very valuable info. Yes, the "arms" are offset, about 3/4",the parting line isn't straight. Not obvious in the photo. I hope that it's not a problem for Dave

Hi Folks, Here are the parts. Weigh about two pounds each. Thanks.

Thanks for the lead. I'll contact them this morning

Hi, Want to buy a straight, 25" Firestone type C-3 rim Thanks

Hi, Looking for a foundry to cast a pair of parts, about 2 lbs. each in ductile iron I have sample parts for patterns. Thanks

Space Number is "Cee Two Eye Forty Four, Not Cee Twenty One Forty Four. Some folks have been confused in earlier years

Drawbar with 2 5/16" ball. Sway control damper, and a pair of Reese load leveling bars. $140.00 FOB Canandaigua, NY, or at my space in the Chocolate Field, C2I-44

Hi Folks, YES!! MOXIE tasting again this year. 4:00 PM on Thursday, October 9th, Space # C2I-44 in the Chocolate field. Also, if I remember to bring it, we'll also have Moxie jelly.

Log is still available. Lots good quality framing wood here. As the song goes" Summer's almost gone, winter's coming on" It's beginning to look like quality firewood to the wife. Contact me to arrange pick-up. Bill B. (585) 394-6172 gnbboudway@msn.com

Log is still available. Come and get it. Bring money. Thanks.

Ash log for sale. As you know, ash in the desired material for framing antique and classic auto bodies. I have an ash log: 6'-6" long X 18" diameter. Estimated weight: 650lbs. Felled last fall. Too nice to cut up for firewood, but needs to go. Local service for machining available. $120.00 FOB our back yard in Canandaigua, NY E-mail your questions: gnbboudway@msn.com PayPal accepted for payment. Bill Boudway

Hi, #10 Cuprinol is one of the best. Unfortunately, it's not easy to find. I bought my last gallons from Jamestown Distributors in Rhode Island. Good luck, and let us know if tou find a source.

Hi, You might want to consider a PullRite hitch: http://www.pullrite.com/products/pullrite-worry-free-travel-trailer-towing Our friends have one of these. It's unique and makes towing easier. I would have one for our van, but not available yet for that model.

Hi, Now that aventey has invited us to change the subject, here goes; My friends have Model As, but I have a Model G. They, for the most part, have suburbans for tow vehicles, but we have an E-350 Ford window van. Bought last year. 15,000 miles used. $19,200. Outfitted to tow 10,000 pounds for about $800.00. 5.7L engine, not great power, but reasonable mileage when not towing. Our local Ford dealer has a few left. Red, white, or silver. Just a suggestion.

hi Matt, Send me a PM. We went through this last spring. I have our spec sheet and also articles about the process. Trailer Details.pdf