aron_budapest
Members-
Posts
49 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by aron_budapest
-
Maybe a stupid idea but do you have proper airflow through the radiator? Is your fan blade in good position and close enough to the radiator? Is it correct size and number of blades for your car? Once I had an old car with modified electric fan installed but overheats...all checked again and again...carb,ignition,water pump,replace heater,replace temperature gauge,remove thermostat and so.The problem was that some stupid do the +- in the electric, fan turns opposite way.Don't suck air in,just hardly tried to push the air out from the engine bay against 50mph incoming wind. I changed the polarity and all fine. In your case its not the problem except the fan blades are in correct position
-
Yes this photo was made in front of the so called "parade grandstand"in Budapest Varosliget. The huge bronze Stalin statue stands the top of it till 1956 october when the revolution knocked it down. They cut the legs with flame cutter and tow with truck till it collapsed.(the statue inside reinforced with railway rail) Then only stalins boots are on the grandstand, the public language call it boot's square :)
-
Period images to relieve some of the stress
aron_budapest replied to Walt G's topic in Period Photos - Pre WWII
-
Period images to relieve some of the stress
aron_budapest replied to Walt G's topic in Period Photos - Pre WWII
-
Period images to relieve some of the stress
aron_budapest replied to Walt G's topic in Period Photos - Pre WWII
-
The Ressurection of Daphne - a 1932 DL
aron_budapest replied to Taylormade's topic in Dodge & Dodge Brothers
This year I hope you can drive Daphne at least.Even if it is not 100% ready, only with front seat and windshield it could be fine to run with. -
Hey, those were the days when a simple headlight strong enough to hold a woman! I see a 8 badge center of the grill and maybe a big A in the grille.... what car is it
-
Please somebody identify this metal case but bronz fitting lamps. The rim is interesting, it connects to the bucket with tread! No sign or numbers.
-
Original 1928/29 Model A Ford Luggage Rack
aron_budapest replied to Chuck Kuntz's topic in Parts For Sale
Hello Could you calculate a postal cost to NJ08648 Please? Thanks:Aron -
Hello How much costs to post it NJ 08648 ? Thanks:Aron
-
26 Chrylser S70 for sale
aron_budapest replied to impacsys's topic in Chrysler Automobiles and Parts - Buy/Sell
Hello Is the car still for sale? Do you have a clear title for it? Thanks for the answer -
- 157 replies
-
- 10
-
1927 Chrysler Finer 70 steering column
aron_budapest replied to Mikko Ahlström's topic in Chrysler Products - General
Thanks for the link! At least I see how it is look like. The prices are way to much for me, I can cast this 3 parts from bronze about 15$. All I need to make a wooden sample that fits and then they can sand molded. -
1927 Chrysler Finer 70 steering column
aron_budapest replied to Mikko Ahlström's topic in Chrysler Products - General
-
1927 Chrysler Finer 70 steering column
aron_budapest replied to Mikko Ahlström's topic in Chrysler Products - General
-
1927 Chrysler Finer 70 steering column
aron_budapest replied to Mikko Ahlström's topic in Chrysler Products - General
-
1927 Chrysler Finer 70 steering column
aron_budapest replied to Mikko Ahlström's topic in Chrysler Products - General
-
1927 Chrysler Finer 70 steering column
aron_budapest replied to Mikko Ahlström's topic in Chrysler Products - General
Hi I have a Chrysler 65, 1929 and like to do the same repair at this winter time. My adjusters (ignition, throttle, lamp switch) are made from pot alloy and they are all broken. I bought a Chrysler 77 manual on ebay, later I made photos of the steering gear. Maybe it will help. -
Thanks for the ideas. Yes it is looks like a Model B Ford as I see on the photos on internet but without the fuel ratio adjusting screw. But all of them has a Zenith sign on the house.
-
Please if somebody knows what car this carb was used please let me know. No sign, no mark nothing. Only a Z and A letter near the broken inlet tube.Material cast iron. Inlet diameter at air filter 48mm, inlet at manifold 33mm. As soon as I will now it will be for sale.