john ullrich

George Albright has a 1600 kent engine in the Sparrow race car that he is trying to sell on line right now and is located in Ocala FL engine has been gone thru by a former SCCA great...check it out.

Rootleib can make you a new one....just need the measurements from the radiator to hood former etc...

Looking at your patent date May of 14 on the Timken axle, do you believe that the Timken rear axles from that age forward may suit your needs, if so Cadillac used them and may be able to help as they are available.

SOLD ....Thanks AACA

shoot me a text and I will send you some photos from my phone

Not sure what these are off of, came off my 13 Cadillac out of an estate. The rims are split style and still have tires on them so not sure what the clip style holding them together is, the back is solid and the front has the retainer solid slide on ring and is held on to the fellows with wheel lock tabs and bolts. If Some one out there is looking for 24" rims they may work for you. Make me an offer on the set of four. Located in Northern Illinois. John 815 403 3803

MG bug eye Sprite original motor and trans

Just removed, complete motor, SU carburetors and linkage, manifolds, generator, starter, distributor, transmission and clutch assembly $500.00 pallet shipping OK, or certain delivery options may be available by me depending on location 815 403 3803

Just removed, complete motor, carbs and linkage, manifolds, starter, generator, distributor, trans and clutch assembly.....plug and play $500.00 delivery available to certain areas, or can pallet ship 815 403 3803 for any questions

Springfield MA Rolls Royce were obviously built here in Ma, and all had the left hand steering for the US market.

Thank you for your input gentleman.

I Will send photos via email after speaking to prospective buyer.

btt

1913 Model 30 Cadillac Original Car. Completed chassis sandblasted drive train painted. Running engine with new cone clutch leather and springs. Original carburetor, ignition parts, working starter / generator, engine air compressor, wheel bearings and brake linings replaced, radiator and engine holding water while running at idle cool for an hour, oil pump working properly. All gauges, amp, oil sight glass, and original ignition and light switch with original polished horn, all original head lights, sidelights and tail light restored polished and ready to mount. Correct after market period 25" Firestone wooden wheels natural finish with rims fitted to car, perfect set of hubcaps, no tires car on stands, also have set of 27" rims. Body mounted to chassis with new wood frame work. The fenders are original and decent. I have new splash pans which have been reproduced. Radiator shell is good. Car is ready for primer and upholstery, I have original upholstery for pattern. No top, I do have some original top irons, not all. Put tires on and drive away, finish in your color and upholstery scheme. Located in Northern Illinois near Rockford off Interstate 90. Call to discuss, 815 403 3803. $32,500.00

Thanks for your call, all the way from France....I looked at your post on the ECG for the spiral drive gear you are looking for. I believe the only solution is for you to have a new piece machined from the old as a pattern. a good machinist in your area should be able to handle the job....I suggest that so you don't let the gear out of the proximity to your location and you can easily follow up on it, because you will not find another. Good Luck, if I can help further send me a PM.

Looking for Darracq engine parts,1924 to 1927, this was a 1500 cc, there were two styles made... looking for the 14/40 model, what have you? I have parts to trade....rear end gears, engine head, etc. Thanks AACA

Nice complete set of 4 original doors from 1926 1927 touring car with original latches and door hinges ( not the body side) $500.00 Text or call John UIlrich for info and photos 815 403 3803 located in northern Illinois

Still looking for body pieces, phaeton doors or maybe a complete body

Looking for 1913 Cadillac Phaeton body parts, front and rear doors and windshield, or will consider a complete body....what have you? John Ullrich 815 403 3803 Thanks AACA

Looking to purchase or trade parts for front and rear doors to a 1913 five passenger touring car. I have doors from a 1912 I can trade. I also have an additional cowl and rear tub. Contact John Ullrich 815 403 3803.Thanks AACA.

Hi Scott, The thought is 3 to 5 thousands, I went with 4. Check with your mfg and let me know his thoughts. The on the rebuild is typically specked and the piston matched to it. John

One thing I forgot to mention, you must allow for extra clearance in the boring and fitting of an aluminum piston to allow for expansion

I have installed an aluminum piston in my 1910 Model D. There is a counter balance gear in the engine and I did also replace the bearing for the balance gear. I had the crank welded "up" and reground back down to original specs. For the record I utilized a piston out of a John Deere 2 cylinder motor rebuild kit which replaces those original cast iron pistons. The block was bored over by 30 to accommodate the new piston and eliminate the scoring that had occurred from the original style wrist pin which had backed out as a result of someone in the past who had disassembled the motor and had not leaded the wrist pin set bolt in. There was a required @ 5/8 of an inch which had to be added to the dome of the piston which was done by adding a billet of aluminum which was then machined to fit. Then new valves were made up and fitted with the seats being bored out and then lapped in. The adding of a lighter aluminum piston is a common rebuild in early one and two cylinder motors. ( Check with the Oldsmobile,Buick and Cadillac guys, of course we all know who designed those motors.) This accomplishes two things, modern rings for compression and oil and preserves the crank from coming apart by moving a lighter piston. The John Deere piston set comes in with two pistons. I still have the other if any one needs it I will sell it at cost. Knowing that additional fitting costs will arise but probably still cheaper than the alternative. I have no idea what a brand new Brush motor runs like, but this is probably as close as it gets.

Looking for a left hand spinning long shaft Marchal starter, usually found on European 1500cc type engines. Three bolt pattern. Thanks AACA

I have a good pair of headlight lens $50.00 Plus shipping