jackofalltrades70

If you have lost that much fluid, your pump is probably empty, thus no cylinders will move. Need to replace the top cylinders, then fill with oil.........Matt

the top cylinders should be identical left to right. Are you having problems with drivers, or passenger door? Sounds like you might have small problem with switch. Matt

hood is now in primer. did dental work for 6.5 hours today. repairing the mustache bar was a chore in itself. Still not completely happy with it. still have 1/2 of the teeth to go and will probably work on some more details on the teeth before I start polishing them. I'll post pictures when I get further along. Interior material is ordered so I can make door panels and cover the seats. Matt:)

Congrats Robert and glad you are finally getting her out on the road and have some brakes! Cool on your second place trophy and glad you had a great time. Car looks great. Keep up the good work! Matt

Where do I send the down payment for 1947 Roadmaster Circle? I would think that a drive in food joint should be located somewhere outside the perimeter of the neighborhood. We should also accomodate somewhere on our Buickfull community, a place for project vehicles so they are safe and sound. Matt:D

Both ads seem to have location and the same telephone #. Probably family members and neither one realized the other one is posting yet. Matt

1958-buick caballero-estate-wagon Not mine, but looks like some good parts

Tom, It sounds to me that you might have a missing or bad connection between the two switches on the drivers door. Both switches should have power. Either switch should turn on the pump and the switch for the drivers door should open then solenoid on the window cylinder for the driver and the passenger switch likewise for the passenger door. Might check the "jumper" plates between the switches and make sure that they aren't insulated from the posts. Could be that they might be centered just right so they aren't touching anything?? Matt:D

1980 Buick Prices, Values & Specs - NADAguides Tom, Might be a good place to start. Matt:)

Wonderful day @ Hershey on Saturday. Saw quite a few cars out and about at some little car shows here and there. Sunday I worked on the front clip removing a really nasty boo-boo that was put in the front fender somehow or another before I got it. I worked on the clip some more today, and managed to "manuver" it into place and bolt it back on the car. It Fits!!!!!!!!!! I still have more work to do to it, but I was needing floor space in the other stall of the garage for the hood and rear fenders and pontoons, etc. Also received the cowl insulator from Bob's and popped a picture of it. Just have to finish the hydraulic lines and it will go in. Still waiting........................7 weeks later for the wiring harness........3-4 weeks is a really long time. Progress is good! Matt:D

Been very busy on the convertible......Got the new firewall insulator I ordered from Bob's. gotta finish the hydraulic lines so I can install it. Still waiting for the wiring harness.......................... Dunno how I did it, but I put the front clip on myself. I waited and waited but never had any help show up. Matt:D

Very nice car and welcome! All of us Buick nuts are a scroll and a half down the screen. Come on down and stay for awhile. We love pictures and like to help each other out with questions, problems and the like. Matt:D

Went and got the front clip out of storage tonight around 9 and finally got settled down now @ 12:00am. taking the family to Hershey park tomorrow, Will work on the car all day Sunday! Matt:D

Other Makes Other Makes | eBay Now it's been relisted with a Buy it Now of $275,000.00. Impressive! Matt

Do you have any more pictures available? Engine bay, interior, trunk, other sides of the vehicle would be nice. Thanks Matt

Buick Buick | eBay

Not mine either.......................... Buick : LeSabre Buick : LeSabre | eBay

Not mine.......................... Buick : Skylark Buick : Skylark | eBay

Once again, not mine but figured i would post it here for all to enjoy! Matt Buick : LeSabre Buick : LeSabre | eBay

46 1/2" at longest point, 15 1/2" at narrowest height point, the widest part (height) is too difficult to measure because of curvature. There are 6 holes for attaching trim. This is off of 4 door car, I believe. Too short for convertible. 2 door RM is longer yet. So, 4 door is probably what it's off of. Matt

Is the car for sale? What is your asking price? Thanks Matt

Ok, where is the auction listing? I believe this is a buy/sell forum, where you must place a price on the items you are trying to sell. If you want auction results, try e**y. Matt

I'm so glad I was able to sidetrack you! Nice pictures and some very exciting projects you have there! I'm here to help, when needed! Ha! Got my new cowl insulator set today. Gotta finish the hydraulic lines tomorrow so I can get the insulator installed. Wiring harness is up for final wrapping tomorrow and should ship to me before the weekend! Matt:D

2 door, 4 door, convertible????? can you get a measurement of the length for us? Thanks Matt

Bernie, Quite impressive! Nice pictures and love the autoplay with the music. Nice backdrop pictures! Matt