handmedownreatta

i found it.is there another relay i could swap it with to see if it drives better? .

1/8 inch washers was enough to put it back on.

the vacumn leak turned out to be the hose between the air filter and throttle body had folded inward and was letting air in.i bought a harbor freight fuel pressure guage today[couldn't find my old one].i found out that theres no fuel pressure with the key on.running it looked about thirty five pounds[i know too low]but the guage is POURING fuel.so i turned it off quickly.i used to hear the fuel pump run before i started it,but not til its running now.

i can verify that blue was the best interior color.

i always wondered if you could use parts from one of those to put a v8 in a reatta.

if i had to replace the engine id look into buying a grandma car with a supercharged 3.8 and swapping it in.

my exhaust has sagged and is rattling against the third crossmember.i checked rockauto and autozone for the rubber doughnuts to put it back into place but no luck.dealer only?my doughnuts are intact but streathed.

you WILL need a garage for hagerty

the screen says the parking brake is on.til i hit return.

one of the things i like about the 90/91 is how easy it is to swap in a later radio with cd.

my parking brake light now stays on all the time.i used to be able to turn it off by setting the brake and releasing it quickly.i looked under there hoping to adjust the switch of at least unplug it but everythings jammed together under there.

are they available new?my bumper is pushed in.

these cars sure were shiney new.Btw if gm hadn't sold out to the oil companies and murdered the ev1,they might be where tesla is now.

the factory trans cooler system from a 1992 up?riviera will mostly bolt on and look stock. '

i often find myself looking for the volume control instead of the road.

i want those steering wheel controls on the prototype.

would this module be why heater comes with the fan running when its 80 degrees outside when i crank up the car?even when the heater hasn't been on.

i bought a dorman from autozone.i didn't change the seal since this balancer has puller holes and it would be easy to pull again.btw i wasn't able to put that damper back on since the dorman balancer sticks out too far.i may put some washers behind the bracket later.

i use a harbor freight battery maintainer.if i remember to plug it in.

i bought six items for less than forty dollars.since i no longer have reatta brakes i couldn't use any of the brake parts.

you do realize that the bumpers are aluminum not chrome?

ive always had this problem.

https://www.rockauto.com/RSS/vehiclefeeds.php?carcode=1019900&m=wc&l=en&html=true

too bad.

i have to change my harmonic damper so i guess i need to change that sensor too.can the crank seal be changed from the outside?