Cowboyzzz Posted April 4 Share Posted April 4 Good morning all, how many firing orders doe a 1964 Buick Electra have. My back yard mechanic is telling me 2. thanks in advance Link to comment Share on other sites More sharing options...
60FlatTop Posted April 4 Share Posted April 4 "Restraint is my least recognized attribute" Here is a link to the Team Buick 1964 Shop Manual. They have a good selection covering many years. https://www.teambuick.com/reference/library/64_chassis_l/index.php The answer to the firing order question is 1. 1 3 Link to comment Share on other sites More sharing options...
NTX5467 Posted April 4 Share Posted April 4 Look on the intake manifold runners. Usually, the firing order of the particular engine is cast into it. There should NOT be two firing orders for a Nailhead engine, period. But that NH firing order could be different from later Buick V-8s. NTX5467 1 Link to comment Share on other sites More sharing options...
old-tank Posted April 4 Share Posted April 4 2 hours ago, Cowboyzzz said: My back yard mechanic What you need is a shade tree mechanic. 1 4 Link to comment Share on other sites More sharing options...
rocketraider Posted April 5 Share Posted April 5 From 1964 Motor's general repair manual: Firing order Tuneup specs 3 Link to comment Share on other sites More sharing options...
rocketraider Posted April 5 Share Posted April 5 Your mechanic was about half right about two firing orders. The new-for-64 300ci engine used the later GM 1-8-4-3-6-5-7-2 firing order but it wasn't installed in Electras, so I cropped that one out of the picture. Hope it helps. Motor's, Chilton's and Glenn's professional trades edition general repair manuals are nearly as good as the factory publications for many repairs that a general service garage would make. Looking at that Nailhead firing order tells me why they have that "mutter" at idle and low speed acceleration. Link to comment Share on other sites More sharing options...
NTX5467 Posted April 5 Share Posted April 5 I never have done it, yet, but I've always wondered if the firing orders were really the same, as to cyl-to-cyl sequence other than which cyl is designated #1? Idle thought, NTX5467 Link to comment Share on other sites More sharing options...
Lee H Posted April 5 Share Posted April 5 The Nailhead 1-2-7-8-4-5-6-3, Chevy small block 1-8-4-3-6-5-7-2, and Ford Windsor’s 1-5-4-2-6-3-7-8 are actually all the same firing order except for the cylinder numbering convention, and which cylinder is designated #1. There are probably more. 2 2 Link to comment Share on other sites More sharing options...
gungeey Posted April 6 Share Posted April 6 How much more foolproof could the Buick factory make it in 1964? 1 2 Link to comment Share on other sites More sharing options...
NTX5467 Posted April 6 Share Posted April 6 Valve covers rather than an intake manifold runner. Either way, IT was on the engine, usually "in plain open sight". Thanks, NTX5467 Link to comment Share on other sites More sharing options...
60FlatTop Posted April 6 Share Posted April 6 "We" all know that a 1964 Electra would have only a 401 or 425 engine and the firing order for that block. That information is only in a limited subset of the species. In today's accessible research of unlimited knowledge like Eve biting the apple from the tree of knowledge a search for firing order of a 1964 Buick will give all the options of the model lines. That is one of the long term learning problems accessing a database, the answer without the learning process. Data at your fingertips. It shoes up more frequently than one would expect. Just Google a Googol. My wife is a librarian and I figure that's about how big the problem is from her reports. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now