bodyman36 Posted March 5, 2023 Share Posted March 5, 2023 (edited) i just aquired a early 20s buick coupe ,hardtop from a barn find and i wish to try to decode and see what i actully have Edited March 6, 2023 by bodyman36 (see edit history) Link to comment Share on other sites More sharing options...
nzcarnerd Posted March 5, 2023 Share Posted March 5, 2023 If you post the chassis number the year can be determined easily. If there is a firewall id plate then more can be derived from it. At a glance at the car, if the rear hubs have only 6 bolts, then it is one of the larger Master models. Photos are always helpful. Link to comment Share on other sites More sharing options...
1912Staver Posted March 6, 2023 Share Posted March 6, 2023 (edited) Is it a 4 Cyl or a 6 ? If it is a Coupe / hardtop , it could be a roadster with a removable " California " style top. Pictures ? Also what is the wheel size and wheelbase ? Edited March 6, 2023 by 1912Staver (see edit history) Link to comment Share on other sites More sharing options...
Dandy Dave Posted March 6, 2023 Share Posted March 6, 2023 Photos please of the car and any tags or plates you may find on the frame or firewall. Engine serial also helps. Link to comment Share on other sites More sharing options...
bodyman36 Posted March 6, 2023 Author Share Posted March 6, 2023 (edited) ok i raised the hood for the first time and the body tag is still there it says 23- Edited March 6, 2023 by bodyman36 (see edit history) 2 Link to comment Share on other sites More sharing options...
bodyman36 Posted March 6, 2023 Author Share Posted March 6, 2023 now next question is where to buy a wood kit the metal on the car is good but the inner frame of the body, the wood parts on the top area need to be replaced Link to comment Share on other sites More sharing options...
DFeeney Posted March 6, 2023 Share Posted March 6, 2023 The early Fisher Body cars with bad wood turn into "Labor of Love Projects" You need to start with the determination to work through the problems you will encounter. Unless you do most of the work yourself you will be shortly "Underwater" with the cost. Best wishes with your new Buick. 3 Link to comment Share on other sites More sharing options...
1912Staver Posted March 6, 2023 Share Posted March 6, 2023 Your tag reads 23 - 48. That means the car is a 1923 , Model 48. The last year for the " cage valve " style engine. Head is non - detachable . One piece head and cylinder block. The valves are mounted in small , seperate casting's that can be individualy removed. Also last year for rear wheel only brakes. 1924 had many changes, 4 wheel brakes, detachable head . Link to comment Share on other sites More sharing options...
zdillinger Posted March 6, 2023 Share Posted March 6, 2023 As far as the body wood is concerned, no one makes kits. Your best bet is to get the Fisher Body manual for that year and approximate it. The wood top is relatively easy because it has little to no affect on anything else, like how the doors hang, etc. That's a super cool car and I'm jealous. Link to comment Share on other sites More sharing options...
Mark Shaw Posted March 6, 2023 Share Posted March 6, 2023 The most cost effective solution is to make this into a fun speedster. 1 Link to comment Share on other sites More sharing options...
bodyman36 Posted March 6, 2023 Author Share Posted March 6, 2023 the car has sat in a warehouse and was given to me, i have several other old cars and i just enjoy the peace time of working on them i grabbed a 1922 chemlers touring several years ago sitting in a dust covered warehouse as well i just didnt know if there was anybody who made the wood kits to replace the rot in this one 1 Link to comment Share on other sites More sharing options...
bodyman36 Posted March 6, 2023 Author Share Posted March 6, 2023 and ideas on what i should do besides pull plugs and oil cyl and drain and replace oil before i try to start Link to comment Share on other sites More sharing options...
DFeeney Posted March 6, 2023 Share Posted March 6, 2023 I would remove the pan. They are always full of sledge and you can shake the rods to see if they are tight and clean the oil pump strainer. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now