Roadster or Coupe rear body section

[Kean Thompson]

Roadster / Coupe body???? Once identified, this will be available as I am having a clean up and have no use for it.

[drwatson]

It looks like we have a Model A Ford. This photo is a 1930.

[viv w]

Definitely not Ford

[Scott Bonesteel]

I would think that the rumble seat lip drain might be an indicator.  

[41 Su8]

Windshield stantions, wheels, top rests, and tail light all point to Model A Ford.  Door handle is for a Model A Sedan.  John

 

Looked at the wrong picture.

Edited January 16, 2022 by 41 Su8 (see edit history)

[Oregon Desert model 45]

This started out as a coupe body.

A roadster would have a nail flange at the upper beltline where the sheetmetal gets nailed to the wood framing. Instead there is a ragged cut sheetmetal edge.

Another clue is the 2 tabs with 3 holes each. This is where the vertical wood timbers that support the roof structure and form the sides of the rear window framing are fastened to the lower sheetmetal.

If this is located in Australia, then it is probably a Holden or other local manufactured body which differs enough from US made bodies and is making identification difficult. 

Advertise this as a hotrod roadster project body and someone will want it. 

Edited January 15, 2022 by Oregon Desert model 45
edit (see edit history)

[Kean Thompson]

Is in Australia but came from WA state with 28-30 Packard and Cadillac parts.