What do I have - looking to sell..

[nick8086]

Not sure what car these will fit - not marked..

 

Only four of them are Glass.

[drwatson]

Oval glass one looks like 42 - 48 Ford Passenger car.  

Plastic one at bottom might be 49-50 Olds. but looks too short, might be photo angle. Check for GUIDE p/n on edge

 

Edited October 20, 2021 by drwatson
clarify (see edit history)

[Larry Schramm]

Looks like a bunch of trailer light lenses, mostly.

[Ben Bruce aka First Born]

42 minutes ago, Larry Schramm said:

Looks like a bunch of trailer light lenses, mostly.

 

 I agree with Larry.  Lenses for truck/trailer clearance and tail lights.   Worth about a dime a dozen.

 

  Ben

[The 55er]

The plastic taillight lens on the very bottom should be about 3 1/2" long and fits 1949 Chevrolet cars. It should be marked Guide R-19 on the bottom of the frontside and have the P/N 5937861 visible on the perimeter of the backside. The round NACO glass lens with the chrome bezel that's pictured all by itself fits 1949-1951 Willys Jeepsters among others.  The larger red plastic lens on the left side of the first picture right on the crack of the wall fits full-size 1963 Chevrolet cars. 

[nick8086]

What about these glass ones?

 

Lights on the top of an old truck cab?

[The 55er]

Yes, they're some kind of a cab marker lens (something like a Grote, Arrow, or Yankee brand) but there are plenty of these still out there and their value is probably minimal. 

[58L-Y8]

The square lens with the convex surfaces in both colors are the marker light lens for truck bodies in the 1930's-1950's.  The square lights fit on the side surfaces of the bed.

[m-mman]

Top photo upper right, plastic, oval, red, two screw holes - 1964 Mercury.  Might say 64MY(?) 

 

Unfortunately the fragile edge, ridge is (typically) broken.   Plus they have been reproduced.