bhemi Posted November 26, 2020 Share Posted November 26, 2020 My coupe came as jigsaw puzzle. As I finally get it near to paint the fellow building is asking about inner fenders. I don't believe the 40 series cars had metal ones like the bigger series cars. Was there any type of splash shield? Link to comment Share on other sites More sharing options...
DonMicheletti Posted November 26, 2020 Share Posted November 26, 2020 The inner fender splash guards are part of the fender. The engine side panx are metal. Link to comment Share on other sites More sharing options...
1937McBuick Posted November 27, 2020 Share Posted November 27, 2020 Front or rear? Link to comment Share on other sites More sharing options...
Stooge Posted December 2, 2020 Share Posted December 2, 2020 (edited) I dont have any spare splash shields from my 1937 series 60, but i did just sandblast the pair of them and could take a picture of them as they would be very easy to replicate, atleast function wise. there is a stamped design into them that i'm assuming is to make them more rigid, but something similar could be done with a power hammer, bead roller, etc. Edited December 2, 2020 by Stooge (see edit history) Link to comment Share on other sites More sharing options...
Gary W Posted December 3, 2020 Share Posted December 3, 2020 My '37 Special has these square metal splash shields in the rear fenders. There is a circular design stamped into them. I can get you detailed photos of the attachments.... Let me know what you need. Gary Feb 2017 at the tear down stage but you can actually see this better. LEFT REAR FENDER Restored, inside the left rear fender. I had my shields powder coated during restoration. Gary 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now