engine turned dash panels for a 41 Super

[henry clay 1]

Im looking to buy an engine turned dash panel and glove box door for a 41 Super.

Alternatively,  can my existing panels be restored?

 

Thanks.

 

HC

[ILIKECARS53 251]

Give Doug Seybold in Ohio a call and he will advise you if they can be restored.  

[2carb40 154]

10 hours ago, henry clay said:

Im looking to buy an engine turned dash panel and glove box door for a 41 Super.

Alternatively,  can my existing panels be restored?

 

Thanks.

 

HC

There have been discussions on this forum fairly recently about correct patterns on original panels and on some that get redone. Suggest u look closely to see if you can tell which yours might be and if you want to be concerned about that. If redone, I believe its somewhere North of $1,000.00. Contact me by private message if you decide on used "driver" quality originals if you like. Good luck either way.

[Roadmaster71 71]

This link goes to a discussion about engine turned panels. I believe both 1940 and 1941 are discussed.

Also, Skip Boyer is restoring the panels too. 

 

 

 

[Ruff41 0]

I have a restored dash panel and glove box door if you’re interested just let me know I’ll send pictures thanks