28 Chrysler Posted July 21, 2020 Share Posted July 21, 2020 Is this a 1929 Model 65 front bumper center medallion ? Link to comment Share on other sites More sharing options...
keiser31 Posted July 22, 2020 Share Posted July 22, 2020 I don't think it is for a 1929. Probably earlier. Link to comment Share on other sites More sharing options...
28 Chrysler Posted July 23, 2020 Author Share Posted July 23, 2020 I looked on line and saw some photos of 1926s and 27s with just a round medallion but none with the scalloped edges. All of the Imperials I found had a spearhead type. I found non for the rear bumpers. Link to comment Share on other sites More sharing options...
keiser31 Posted July 23, 2020 Share Posted July 23, 2020 I don't believe I have ever seen one like the one in question. Link to comment Share on other sites More sharing options...
24Chry48 Posted July 24, 2020 Share Posted July 24, 2020 I have never seen one like that on any early Chryslers. It is probably one that was made by someone. They did a good job. Link to comment Share on other sites More sharing options...
auburnseeker Posted July 24, 2020 Share Posted July 24, 2020 Is the center piece one of those cereal box premiums from the 50's. The outer piece could just be something they found and mated the two. I have done similar things in the past from scrap boxes. Never thought what people might think that come across them years later. Maybe one of mine will end up here some day under a what is it? Link to comment Share on other sites More sharing options...
viv w Posted July 24, 2020 Share Posted July 24, 2020 Some of the earlier Chryslers left the factory without bumpers, as these were an optional extra. It is possible that this bumper clamp was for an aftermarket bumper. Not one I have seen before. Link to comment Share on other sites More sharing options...
28 Chrysler Posted July 24, 2020 Author Share Posted July 24, 2020 (edited) The center emblem is nickel plated (brass?) and the rear part is plated cast iron, I don't think someone would take the effort to make up this piece. Everything looks like a factory manufactured part. The Wheaties emblems were somewhat stamped sheet metal with the detail printed on. Edited July 24, 2020 by 28 Chrysler (see edit history) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now