Wayne jaffe Posted October 2, 2019 Share Posted October 2, 2019 Im new at this im looking for a cutout relay for my 38 dodge restoring back to original. 6volt system anyone out there that can help me Link to comment Share on other sites More sharing options...
TerryB Posted October 2, 2019 Share Posted October 2, 2019 The cut out that mounts to the generator? Car or truck? Link to comment Share on other sites More sharing options...
edinmass Posted October 2, 2019 Share Posted October 2, 2019 TC4301-A is a replacement Autolite correct? If so, you can buy new reproduction units from the motorcycle guys......the look good, not sure on Chinese quality. I probably have several new and used units. PM me........they fit big cars so good used units can get expensive. Link to comment Share on other sites More sharing options...
Wayne jaffe Posted October 2, 2019 Author Share Posted October 2, 2019 45 minutes ago, TerryB said: The cut out that mounts to the generator? Car or truck? 38 dodge pickup 1/2 ton Link to comment Share on other sites More sharing options...
TerryB Posted October 2, 2019 Share Posted October 2, 2019 (edited) Ok, my 37 Dodge 1/2 ton had that setup too. Mine was the small rectangular cut out, mounted with two screws to the generator. Had one input wire from the generator and one output wire. It was an autolite product. Try Old Buicks 2 member on this forum. He sells stuff like this. He will probably want to know the model number of your generator. It’s on the tag that’s hopefully still attached to your generator. Edited October 2, 2019 by TerryB (see edit history) Link to comment Share on other sites More sharing options...
Wayne jaffe Posted October 2, 2019 Author Share Posted October 2, 2019 TerryB thank you its good to see people out there trying to help others Thank you 1 Link to comment Share on other sites More sharing options...
Wayne jaffe Posted October 2, 2019 Author Share Posted October 2, 2019 (edited) 11 hours ago, edinmass said: TC4301-A is a replacement Autolite correct? If so, you can buy new reproduction units from the motorcycle guys......the look good, not sure on Chinese quality. I probably have several new and used units. PM me........they fit big carsgood used units can get expensive. Hey Ed thank you TC4301-A is a autolite cutout relay with one terminal they produced them in 1935 first year my generator is Gar4608 What do you have Edited October 3, 2019 by Wayne jaffe Made mistake (see edit history) Link to comment Share on other sites More sharing options...
Wayne jaffe Posted October 2, 2019 Author Share Posted October 2, 2019 6 hours ago, TerryB said: Ok, my 37 Dodge 1/2 ton had that setup too. Mine was the small rectangular cut out, mounted with two screws to the generator. Had one input wire from the generator and one output wire. It was an autolite product. Try Old Buicks 2 member on this forum. He sells stuff like this. He will probably want to know the model number of your generator. It’s on the tag that’s hopefully still attached to your generator. Link to comment Share on other sites More sharing options...
Wayne jaffe Posted October 2, 2019 Author Share Posted October 2, 2019 Hey Terry its wayne im new at this you said to talk to old buicks 2 how do you get to other people Link to comment Share on other sites More sharing options...
Old buicks 2 Posted October 2, 2019 Share Posted October 2, 2019 Hey guys, I'm on this one now. I need to know what model Dodge it is first of all. Selection is as follows: D6, D8, D9, D11 or D118. D6 and D9 call for a cutout, D8, D11 and D118 call for a voltage regulator. I have the cutout in stock and will have to check on the VR Tom 1 Link to comment Share on other sites More sharing options...
Wayne jaffe Posted October 2, 2019 Author Share Posted October 2, 2019 (edited) 1 hour ago, Old buicks 2 said: Hey guys, I'm on this one now. I need to know what model Dodge it is first of all. Selection is as follows: D6, D8, D9, D11 or D118. D6 and D9 call for a cutout, D8, D11 and D118 call for a voltage regulator. I have the cutout in stock and will have to check on the VR Tom Hello its a 38 dodge 1/2 ton rc series im looking for a autolite cutout relay #TC4301-A my generator # is GAR 4608 any luck Edited October 2, 2019 by Wayne jaffe Mad mistake (see edit history) Link to comment Share on other sites More sharing options...
edinmass Posted October 2, 2019 Share Posted October 2, 2019 Been on the road, I will check what I have Sunday, I’m going to Hershey on Tuesday so the time window is small. Link to comment Share on other sites More sharing options...
TerryB Posted October 2, 2019 Share Posted October 2, 2019 13 minutes ago, Old buicks 2 said: Hey guys, I'm on this one now. I need to know what model Dodge it is first of all. Selection is as follows: D6, D8, D9, D11 or D118. D6 and D9 call for a cutout, D8, D11 and D118 call for a voltage regulator. I have the cutout in stock and will have to check on the VR Tom Tom, pick up truck as noted above! Link to comment Share on other sites More sharing options...
TerryB Posted October 2, 2019 Share Posted October 2, 2019 I think the old Auto-Lite numbers began with CB-XXXX. Link to comment Share on other sites More sharing options...
Wayne jaffe Posted October 3, 2019 Author Share Posted October 3, 2019 (edited) 10 hours ago, TerryB said: I think the old Auto-Lite numbers began with CB-XXXX. Mine is TC4301-A it gets attached by 4 screws that hold it on the generator i guess being new here im only allowed several posts Edited October 3, 2019 by Wayne jaffe Mad mistake (see edit history) 1 Link to comment Share on other sites More sharing options...
Wayne jaffe Posted December 15, 2019 Author Share Posted December 15, 2019 On 10/2/2019 at 8:46 AM, edinmass said: TC4301-A is a replacement Autolite correct? If so, you can buy new reproduction units from the motorcycle guys......the look good, not sure on Chinese quality. I probably have several new and used units. PM me........they fit big cars so good used units can get expensive. This is wayne I'm looking for the said cut out gen switch TC4301-A would you happen to have any Link to comment Share on other sites More sharing options...
edinmass Posted December 15, 2019 Share Posted December 15, 2019 (edited) Call 413-543-9017 on Tuesday after 930 am and ask for John.......he should have new and used units on the shelf. He will be out of town till them. I’m down south now. Edited December 15, 2019 by edinmass (see edit history) Link to comment Share on other sites More sharing options...
Wayne jaffe Posted December 15, 2019 Author Share Posted December 15, 2019 Ok Thank you Link to comment Share on other sites More sharing options...
trini Posted December 16, 2019 Share Posted December 16, 2019 This is a good candidate to replace the guts with a diode and still keep the looks. Link to comment Share on other sites More sharing options...
Wayne jaffe Posted December 16, 2019 Author Share Posted December 16, 2019 51 minutes ago, trini said: This is a good candidate to replace the guts with a diode and still keep the looks. Im trying to bring back this pickup with the technology it had when produced Link to comment Share on other sites More sharing options...
trini Posted December 16, 2019 Share Posted December 16, 2019 Good luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now