kdml Posted June 15, 2019 Share Posted June 15, 2019 I am trying to put together the remote mirror on my 65. I am thinking I am missing a part. The parts I have are shown in the attached picture. I can't figure out how to attach the toggle/cable mechanism to the plate which mounts to the door panel. I thought the round part shown in the picture would do it, as it has screw holes which align with the holes in the door panel plate, but the toggle just slides right out. I could not find anything in my shop manual or any pictures when searching this forum. What am I missing? Thanks Doug Link to comment Share on other sites More sharing options...
abandg Posted June 17, 2019 Share Posted June 17, 2019 Doug, I don't think your missing anything. Put that washer looking item over the handle and slide it past the cables, then slide it towards the handle again and if you spin it correctly it will stop at the front of the cable connector and hook the handle inside.after you have screwed it to the mirror bezel. I hope I did not confuse you. Gene. Link to comment Share on other sites More sharing options...
kdml Posted June 21, 2019 Author Share Posted June 21, 2019 Thanks Gene I tried what you explained, but can’t see how the ring hooks the handle. I found the attached picture online. It shows a second ring which I’m guessing is the part I’m missing. Now I just need to find that second ring. Link to comment Share on other sites More sharing options...
abandg Posted June 21, 2019 Share Posted June 21, 2019 I see your missing the spring clip. I am sure I have it for you. I will be at the Riviera national all next week. When I return I will dig one out and mail it to you for free. If you can wait. Send me your address via an e-mail to abandg@aol.com and I will take care of it if you can wait. Gene. Link to comment Share on other sites More sharing options...
kdml Posted June 21, 2019 Author Share Posted June 21, 2019 Much appreciated Gene. I will send you my address. Just to confirm, I have circled the part I’m missing in the attached picture. That’s a spring clip? Link to comment Share on other sites More sharing options...
abandg Posted June 21, 2019 Share Posted June 21, 2019 Yes it is like a lock washer. I have these Here is a picture. 1 Link to comment Share on other sites More sharing options...
1965rivgs Posted June 22, 2019 Share Posted June 22, 2019 Gene, he needs the other, thicker ring Tom Link to comment Share on other sites More sharing options...
kdml Posted June 23, 2019 Author Share Posted June 23, 2019 Thanks Tom Yes, I need the thick ring I circled in the prior post. I’ll get a better picture of what I have. I believe I have everything in Gene’s picture. Link to comment Share on other sites More sharing options...
abandg Posted June 23, 2019 Share Posted June 23, 2019 I will send you what you need after the Riv national. Send me you address to my e-mail abandg@aol.com. Gene. Link to comment Share on other sites More sharing options...
kdml Posted July 7, 2019 Author Share Posted July 7, 2019 Gene, I received your package. Thanks again for sending me the part I needed. Attached are pictures of the mirror control assembled so others can see how the parts come together. Doug Link to comment Share on other sites More sharing options...
rjd Posted April 21, 2020 Share Posted April 21, 2020 Wow. I am in need of the two hold down parts in Doug's photos as well . I don't have the spring clip or the thicker lock down washer for my 65' riv. Does anyone know where I can get them? Thanks, Link to comment Share on other sites More sharing options...
RivNut Posted April 21, 2020 Share Posted April 21, 2020 Gene probably has more of what you're looking for. His contact information is in the classified section of the Riview. Link to comment Share on other sites More sharing options...
NC1968Riviera Posted April 22, 2020 Share Posted April 22, 2020 abandg, who responded above, should have your part. Contact Gene for all of your First Gen needs. Link to comment Share on other sites More sharing options...
Hans3 Posted April 22, 2020 Share Posted April 22, 2020 Looks like I need one of those spring clips as well, though my remote seems to work properly without it. If anyone has an extra to sell ... Link to comment Share on other sites More sharing options...
RockinRiviDad Posted April 23, 2020 Share Posted April 23, 2020 If pic in original post is a toggle for a 65, then what year toggle is this? Link to comment Share on other sites More sharing options...
1965rivgs Posted April 23, 2020 Share Posted April 23, 2020 21 minutes ago, RockinRiviDad said: If pic in original post is a toggle for a 65, then what year toggle is this? `66 and later Tom 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now