Dwight Romberger Posted August 9, 2013 Share Posted August 9, 2013 Hi all,There is a recessed area under my front seat. Does anyone know its purpose? The seat mechanism does not seem to require it.Also, the steel sections of the rear floor sag down. Am I correct that these are supposed to be flat?Thanks,Dwight Link to comment Share on other sites More sharing options...
Marty Roth Posted August 9, 2013 Share Posted August 9, 2013 Dwight,Is that where the jack and folding handle might fit?On my '34 & '37, the battery is also under the front seat. Link to comment Share on other sites More sharing options...
jscheib Posted August 9, 2013 Share Posted August 9, 2013 Dwight, I forget the year of your car, but that does not seem to be the depth of the recess in a '32. Mine is about six inches and will hold the jack, handle and all the other tools. The rear floor is flat in he area where the passengers feet and the foot rest would be. I have no photos at present that you could few. John Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 9, 2013 Author Share Posted August 9, 2013 (edited) Marty and John. Thanks for the response.The recess is 1 1/2" deep.I didn't get a jack with the car, so I guess I wasn't thinking of a place to put one! There was probably a tool kit that came with the car that might go there.It looks like my crank will fit in there also.DwightMaking roof bows today and a few other wood body pieces.While the frame is exposed, I am going to inject Gorilla glue into all the joints. It should tighten things up considerably. Edited August 9, 2013 by Dwight Romberger (see edit history) Link to comment Share on other sites More sharing options...
michaelod Posted August 9, 2013 Share Posted August 9, 2013 Dwight,My coupe has a similar shape under the rear seat. There is no access whatsoever to that area so I can only conclude it is designed to provide additional strength in an area of the floor constructed of sheet metal. If you have access to the area perhaps there is another reason in your case. The balance of the sheet metal on my floor has the ribs that yours does but does not sag. Thanks, Link to comment Share on other sites More sharing options...
ROD W Posted August 9, 2013 Share Posted August 9, 2013 All the earlier years had the recessed metal panel under the seat, with the seat support timbers there was a 6'' space under the seat for storage. Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 9, 2013 Author Share Posted August 9, 2013 What I find really strange is that the ribbed steel panel under the rear seat sags!How did someone manage to do that? Link to comment Share on other sites More sharing options...
michaelod Posted August 10, 2013 Share Posted August 10, 2013 Dwight,You might want to check to see if all your flooring panels are installed correctly. Mine has the ribs pointing down where yours are pointing up and I am certain that is the way they left the factory. You mentioned they sagged and I was just wondering if someone has had them off at one time. Probably not an issue but just something I noticed. Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 10, 2013 Author Share Posted August 10, 2013 Thanks Michael.The ribs point down on mine also. The pic just makes it look like they are pointing up.Your floors are really flat compared to mine.Dwight Link to comment Share on other sites More sharing options...
tblack Posted August 13, 2013 Share Posted August 13, 2013 Thanks Michael.The ribs point down on mine also. The pic just makes it look like they are pointing up.Your floors are really flat compared to mine.Dwight Dwight my 31 Chevy is of similar construction ...yes as noted the space under the seat is storage and my floors sag a bit as well....Probably those kids jumping up and down before seat belts have stretched the floor panel Link to comment Share on other sites More sharing options...
Pete K. Posted August 23, 2013 Share Posted August 23, 2013 I remember my 1930, Series 40, Model 47 had the exact same shape on that piece of sheet metal. It was a low mileage original, in good shape! I think it was made that way. My tools/ jack & handle, were under the front seat cushion. Link to comment Share on other sites More sharing options...
Dwight Romberger Posted August 23, 2013 Author Share Posted August 23, 2013 Thanks Pete. It makes sense. The space just looked so odd to me.I removed the sagging panels and bent them flat. There was a considerable amount of "oil canning" Because the metal was stretched. So, I am using a heat shrinking method I found on youtube on the steel. It has worked so far.Dwight Link to comment Share on other sites More sharing options...
Guest dragonlance1964 Posted September 9, 2013 Share Posted September 9, 2013 I have a related question on a 1930 buick 60 series. How do you release the front seat so that you can get under it? The old owner (my grandfather) has stored a lot of spare parts under the front seat in that recessed area you've been talking about Link to comment Share on other sites More sharing options...
Guest dragonlance1964 Posted September 13, 2013 Share Posted September 13, 2013 thanks for the help getting under my front seat on my model 67. To add to the question of the purpose of the recess under the seat my buick had the factory jack, engine crank handle, and split rim tool in the recess. Link to comment Share on other sites More sharing options...
v12lincoln Posted September 24, 2013 Share Posted September 24, 2013 I have a 33 66s and the seat folds forward to get to the space under the seat. I didnt notice it until I had the seat out to do some work on the car, picked it up from the back and the frame stayed on the ground at the rear. Link to comment Share on other sites More sharing options...
Marty Roth Posted September 25, 2013 Share Posted September 25, 2013 thanks for the help getting under my front seat on my model 67. To add to the question of the purpose of the recess under the seat my buick had the factory jack, engine crank handle, and split rim tool in the recess.goes back to my Post #2,it just makes good sense,and since you have to remove the seat cushion, your wife has to get out of the car while you jack it up!!This could be a safety feature:confused: , or could be easier to jack with reduced weight on the jack:rolleyes:. Link to comment Share on other sites More sharing options...
Guest Shoe1932 Posted October 5, 2013 Share Posted October 5, 2013 JscheibIs the tool recess for a '32 - 67 under the back seat or at the back floor where the passengers feet go. Need some advice before I begin looking. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now